Deck 3: Digital Radiographic Image Processing and Manipulation

Question 1

A look-up table is not used as a reference to

A) set appropriate kilovoltage peak and milliampere-seconds values.
B) evaluate raw luminance values.
C) correct luminance values.
D) provide appropriate brightness and contrast.

Answer 1

set appropriate kilovoltage peak and milliampere-seconds values.

Question 2

If the entire range of exposure were digitized,pixel values representing ______ would be digitized.

A) scatter
B) only diagnostic values
C) only the extreme values
D) all values

Answer 2

all values

Question 3

Data collected within the collimator are represented by a

A) histogram.
B) characteristic curve.
C) pixel graph.
D) matrix graph.

Answer 3

histogram.

Question 4

A wraparound image or image aliasing occurs when

A) sampling occurs twice per cycle.
B) spatial frequency is less than the Nyquist frequency.
C) sampling occurs less than twice per cycle.
D) spatial frequency is equal to the Nyquist frequency.

Question 5

The Nyquist theorem states that the

A) sampling frequency must be equal to the input signal bandwidth.
B) input signal bandwidth must be twice the sampling frequency.
C) sampling frequency must be twice the input signal bandwidth.
D) input signal bandwidth must be sampled twice.

Question 6

Automatic rescaling means that images are produced,regardless of the amount of exposure,with

A) uniform size and shape.
B) uniform contrast and density.
C) variable size and shape.
D) variable contrast and density.

Question 7

The longer an image is stored in the computed radiography (CR)cassette,the

A) more detailed the processed image.
B) more energy is lost by the electrons.
C) easier the image is to process.
D) slower the processing time.

Question 8

Changing the steepness of the exposure gradient

A) varies density.
B) determines spatial frequency.
C) controls image contrast.
D) has no effect on the image.

Question 9

The more manipulation of the image,the greater the

A) amount of resolution.
B) loss of information.
C) quality of the image.
D) radiologist manipulation.

Question 10

If too few pixels are sampled,the result will be

A) high resolution.
B) low resolution.
C) high contrast.
D) low contrast.

Question 11

If all of the shades were left in an image after processing,the contrast would be

A) too low.
B) too high.
C) sufficient.
D) unaffected.

Question 12

The higher the kilovoltage peak,the

A) wider the histogram.
B) narrower the histogram.
C) higher the frequency.
D) lower the frequency.

Question 13

Failure of the reader to find the collimation edges of an image

A) will result in image cutoff.
B) may cause the image to be too bright or too dark.
C) will eliminate all scatter.
D) will have no effect on the resultant image.

Question 14

Changing the slope of the look-up table graph will increase or decrease

A) density.
B) the number of pixels.
C) the matrix size.
D) contrast.

Question 15

Raw data used to form the image histogram are compared with

A) a normal histogram referenced by the computer.
B) all histograms stored for that anatomic part.
C) the last histogram of that anatomic part.
D) None of these

Question 16

Loss of detail in a digitally processed image

A) occurs because of the number of conversions.
B) is extremely minimal compared with film/screen.
C) is equal to film/screen.
D) has almost no impact on the image.

Question 17

The improper algorithm application may result in

A) enhanced contrast.
B) improved resolution.
C) repeat examinations.
D) degradation of the image.

Question 18

Focal spot and OID affect image sharpness _____ imaging.

A) only in film/screen
B) only in digital
C) in both film/screen and digital
D) in neither film/screen nor digital

Question 19

In an effort to display the pixels for the area of interest when exposure is greater or less than what is needed to produce an image,______ occurs.

A) overexposure
B) underexposure
C) automatic collimation
D) automatic rescaling

Question 20

A histogram displays the useful signal by locating

A) all pixel values.
B) maximum and minimum signal.
C) maximum signal only.
D) minimum signal only.

Question 21

The workstation function that allows selection of preset terms or manual text input is termed image

A) connection.
B) annotation.
C) stitching.
D) lacing.

Question 22

Proper patient demographic input ensures

A) multiple records on each patient.
B) linking of all the patient's files.
C) multiple versions of the patient's name.
D) an increase in the amount of data tracking.

Question 23

An archive query retrieves images from the PACS based on any of the following except

A) patient name.
B) examination date.
C) anatomical area.
D) technologist anatomical number.

Question 24

Magnification of the entire image at the workstation is termed

A) image intensification.
B) macroradiography.
C) enlargement.
D) zoom.

Question 25

The process of joining two or more images into one continuous image is known as image

A) connection.
B) annotation.
C) stitching.
D) lacing.

Question 26

Image level parameters control image

A) brightness.
B) darkness.
C) contrast.
D) density.

Question 27

Averaging the frequency of each pixel with surrounding pixel values to remove high-frequency noise is called

A) high-pass filtering.
B) low-pass filtering.
C) edge enhancement.
D) noise enhancement.

Question 28

Suppressing frequencies in the areas of interest is known as

A) algorithm application.
B) center enhancement.
C) edge enhancement.
D) masking.

Question 29

The shape of the histogram is anatomy specific.

Question 30

The ability to send images to local network stations can be accomplished using the

A) archive query.
B) patient demographic input.
C) QC query.
D) manual send function.

Question 31

Low-pass filtering is also known as

A) evening.
B) smoothing.
C) masking.
D) marking.

Question 32

Proper patient demographic input is the responsibility of the

A) technologist.
B) QC manager.
C) radiologist.
D) transporter.

Question 33

Amplification of the frequencies of the areas of interest is known as

A) algorithm application.
B) center enhancement.
C) edge enhancement.
D) masking.

Question 34

Window width controls the ratio of black and white,also known as

A) window.
B) level.
C) contrast.
D) matrix.

Question 35

Excessive light entering the eye when viewing an image is known as ______ glare.

A) veil
B) window
C) level
D) None of these

Question 36

Input of annotation for identification of the patient's left or right side

A) should take the place of the technologist's anatomy markers.
B) should be used in conjunction with the technologist's markers.
C) eliminates the need for any other type of anatomy markers.
D) None of the above

Question 37

An image manipulation process that fills in the background so that it is darkened is known as

A) window.
B) level.
C) shuttering.
D) collimation.

Question 38

High-pass filtering is useful for enhancing

A) small structures.
B) fine bone tissues.
C) large bony structures.
D) organs and soft tissue.

Question 39

Image aliasing is similar to the moiré effect caused by grid error.

Question 40

The image reader scans and reads the image from the

A) back edge of the imaging plate to the opposite end.
B) leading edge of the imaging plate to the opposite end.
C) right to left side.
D) left to right side.

Question 41

Historical study of patient examinations can be accomplished through the manual send function.

Question 42

Basic workstation functions include contrast manipulation,edge enhancement,and smoothing.

Question 43

Automatic rescaling can be substituted for appropriate technical factors.

Question 44

No matter where the orientation stickers or labels exist on a digital cassette,the image will display correctly.

Question 45

Shuttering removes the dark exposed border,reducing the amount of information to be stored.