Deck 5: Designing Remote Access and Terminal Services Strategies

Question 1

Terminal Services includes technologies that allow users to run applications or full-blown desktops on terminal servers.

Answer 1

True

Question 2

A ____ is a Windows Server 2008 server with the Routing and Remote Access service installed and configured as a VPN server.

A) bridgehead server
C) DMZ server
B) VPN server
D) bastion server

Answer 2

B

Question 3

____ enforcement is used to ensure that a client is compliant prior to issuing TCP/IP configuration information.

A) DHCP
B) IPSec
C) Terminal
D)802.1x

Answer 3

A

Question 4

____ servers are used to dynamically provide TCP/IP configuration information such as IP addresses, subnet masks, default gateways, the address of DNS, and more.

A) Boot Protocol (BOOTP)
B) Windows Internet Network Service (WINS)
C) Dynamic Name Service (DNS)
D) Dynamic Host Configuration Protocol (DHCP)

Question 5

Autoremediation is enabled by default when a ____ is created.

A) security policy
C) network policy
B) network permission set
D) constraint

Question 6

It's common to use a basic method of load balancing, such as DNS round robin, with TS Session Broker.

Question 7

A full-blown server configured as a router is more efficient than a dedicated hardware router.

Question 8

Access to remote networks is provided through either a dial-up connection or a(n) ____ connection.

A) Internet private network (IPN)
C) virtual protected network (VPN)
B) virtual private network (VPN)
D) dedicated protected network (DPN)

Question 9

One or more conditions can be configured for any policy, and the condition(s) determine if the policy is used.

Question 10

____ can be set to Allow or Deny within the policy to control access to the remote access server.

A) Roles
C) Permissions
B) Constraints
D) Policies

Question 11

If a remote access server is hosted on the internal network with just a single firewall, the firewall often uses ____ to translate the public IP addresses from the Internet to private IP addresses on the internal network.

A) network address translation (NAT)
C) network access protection (NAP)
B) port address translation (PAT)
D) network address control (NAC)

Question 12

The ____ condition in the network policy settings can be used to specify that the policy will only apply to clients that can be identified through a specific mechanism.

A) protocol type
C) user type
B) identity type
D) role type

Question 13

If NAP ____ is enabled, the SHV can direct the noncompliant client to enable a specific security solution to ensure that the client becomes compliant.

A) autoremediation
C) autocorrection
B) remediation
D) enforcement

Question 14

____ enforcement is used with managed switches and wireless access points to control access and ensure that traffic stays within a limited network.

A) DHCP
B) IPSec
C) Terminal
D)802.1x

Question 15

The ____ condition in the network policy settings can be used to specify that only clients that have received a specific DHCP lease will meet the condition.

A) MS-Service Reason Code
C) MS-Service Class
B) MS-Service Authentication Type
D) MS-Service Service Type

Question 16

____ enforcement is used to ensure that communications with computers are protected with IPSec.

A) DHCP
B) IPSec
C) Terminal
D)802.1x

Question 17

Hosting a server on the Internet adds minimal risk.

Question 18

A(n) ____ server can be used for central authentication and logging.

A) Authorization, Access, and Accounting (AAA)
B) Virtual Private Network (VPN)
C) Internet Security Access (ISA)
D) Remote Authentication Dial-in User Service (RADIUS)

Question 19

____ specify other settings that must be met for the connection, including the authentication method used, idle timeout settings, session timeout settings, and more.

A) Constraints
C) Boundaries
B) Permissions
D) Policies

Question 20

A Windows Server 2008 server can be used as a RADIUS server by adding the ____ service.

A) NPS
C) RADIUS
B) NAP
D) RRAS

Question 21

The ____________________ of a policy determine if the policy will be used.

Question 22

In organizations that use several RADIUS servers, a RADIUS ____________________ server can be implemented as a central switching or routing point.

Question 23

Describe a NAP client.

Question 24

Identify and explain a benefit provided by configuring TS Web Access.

Question 25

The Terminal Services menu is available via the ____ menu.

A) Administrative Tools
C) Control Panel
B) Control Panel Settings
D) System Tools

Question 26

Describe the NAP enforcement and extended state settings.

Question 27

A(n) _________________________ is used to determine which users are granted access to a remote access server.

Question 28

TS CALs are managed and maintained on a(n) ____________________ licensing server.

Question 29

When the ____ scope is selected, other TS servers in the domain can locate the TS licensing server as long as the server is in the same domain and the licensing server is on a domain controller.

A) network discovery
C) domain hosted
B) branch discovery
D) domain discovery

Question 30

______________________________ regularly perform system health updates on the client based on checks identified in SHVs.

Question 31

Explain the meaning of the term "client" with respect to RADIUS servers.

Question 32

List and describe two methods that users can use to start TS RemoteApp applications.

Question 33

List and explain two goals for NAP.

Question 34

The ____ service can be used to balance the load when multiple TS servers are used.

A) TS Gateway service
C) TS Session Broker service
B) TS Web Access service
D) TS Licensing service

Question 35

____ is used to provide end users with access to individual applications or full desktop operating systems from almost any mobile device.

A) Remote Services (RS)
C) Terminal Services (TS)
B) Terminal Interactive Services (TIS)
D) Remote Interactive Services (RIS)

Question 36

List and describe two individual properties the Windows Security Health Validator can be set to check.

Question 37

Explain what is meant by a remediation server group.

Question 38

The ____ service allows clients to connect to terminal servers through a Web browser.

A) TS Gateway service
C) TS Session Broker service
B) TS Web Access service
D) TS Licensing service

Question 39

Terminal Services Gateway allows clients to remotely connect to TS servers using the ____.

A) RemoteApp
B) Remote Desktop Protocol
C) Independent Computing Architecture
D) Thinstation Access Protocol

Question 40

Discuss two significant benefits offered by TS Session Broker, besides load balancing.

Question 41

Discuss the purpose of TS Session Broker.