Deck 22: Structural Drafting

Question 1

Describe the modular principles of concrete block construction.

Answer 1

. Wall lengths, opening locations, and wall and opening heights must be based on the modular size of the block being used.

Question 2

Briefly describe welded wire reinforcement.

Answer 2

Welded wire reinforcement is made of steel wires spaced a specified distance apart in a square grid with the wires welded together.

Question 3

Identify three poured-in-place concrete floor systems.

Answer 3

Steel deck system Ribbed poured-in-place Waffle poured-in-place

Question 4

How is a bond beam constructed? 59728_ch22_EOC_ptg01.indd 1 22/02/16 11:03 am

Question 5

Define precast concrete.

Question 6

Define precast-prestressed concrete.

Question 7

Describe the purpose of placing reinforcing steel in pouredin- place concrete.

Question 8

Give a sample slab-on-grade callout.

Question 9

Give a sample anchor bolt callout.

Question 10

Define structural engineering drawings.

Question 11

Identify the primary components of concrete.

Question 12

Define tilt-up construction.

Question 13

Give a sample rebar callout.

Question 14

What is another name for shop drawings?

Question 15

What is the diameter of a #5 steel rebar?

Question 16

Identify the three basic methods of using concrete for build- ing construction.

Question 17

Describe situations in structural drafting when object lines can be drawn thicker than standard width and when they can be drawn thinner than standard width.

Question 18

How should concrete rebar clear distances be dimensioned?

Question 19

Define shop drawings.

Question 20

Describe how welded wire reinforcement is specified.

Question 21

Define plates as associated with steel materials and give the symbol for plate steel.

Question 22

Put the following plywood information together into a proper callout:

Question 23

Name at least three types of structural systems commonly used for prefabricated steel structure systems.

Question 24

List the three common types of laminated beams.

Question 25

Define girts and purlins.

Question 26

What do the components of the steel shape callout W24 3 55 mean?

Question 27

Give a sample rectangular tubing callout. 2

Question 28

Give a sample glulam callout.

Question 29

Give a sample timber callout.

Question 30

Give a sample callout that can be used to label lumber floor joists.

Question 31

How should all lumber and timber be dimensioned on a drawing?

Question 32

Describe bars as associated with steel materials.

Question 33

Give a sample pipe callout.

Question 34

Describe a panelized roof system.

Question 35

Give a sample callout for a C shape.

Question 36

Identify the callout symbol for the three I-shaped structural materials.

Question 37

Give a sample plate callout.

Question 38

List at least three advantages of using steel studs.

Question 39

Define pilaster.

Question 40

Give a sample callout for flat bar.

Question 41

What size hole is recommended for #8 rebar to be driven through timber?

Question 42

Give a sample bolt callout.

Question 43

Question 44

Briefly describe and give an example of how each category within a general group can have additional pages based on a decimal system. Expand the description and examples to three pages in a category.

Question 45

Explain how the revision process works in structural drafting, including the use of revision clouds and the re- lated revision note.

Question 46

Give a sample equal leg angle callout.

Question 47

If lengths are required for structural members, how should they be given?

Question 48

Interpret the parts of this note: #5 120 OC EACH WAY

Question 49

What type of bolt head is assumed unless otherwise speci- fied on a drawing?

Question 50

How should location dimensions be established to the following members?