Deck 10: Door, Roof, and Moveable Glass Service

Question 1

The ____ is the main steel frame of the door.

A) window regulator
B) door skin
C) door glass
D) door frame

Answer 1

D

Question 2

The door latch engages the door striker on the vehicle body to hold the door closed.

Answer 2

True

Question 3

____ fits around the door or door opening to seal the door-to-body joint.

A) Protective tape
B) Piano wire
C) Molding
D) Door weatherstripping

Answer 3

D

Question 4

There are two basic types of doors used on today's vehicles: framed and boxed.

Question 5

Inside rearview mirrors normally attach to the windshield glass using a quick bond adhesive.

Question 6

____ is being used more and more in the side and rear for increased protection against passengers being thrown out of the vehicle during rollover crashes.

A) Laminated glass
B) Tempered glass
C) Antilacerative glass
D) Conventional glass

Question 7

In and out door adjustments are import because they?

A) prevent weatherstrip sealing
B) ensure paint adhesion
C) prevent wind noises
D) allow water drainage

Question 8

____ have the glass extending up out of the door (when the glass is rolled up) without a frame around it.

A) Frameless doors
B) Hood struts
C) Framed doors
D) Cowl panels

Question 9

____ surround the sides and top of the door glass with a metal frame structure.

A) Hard top doors
B) Hood struts
C) Framed doors
D) Cowl panels

Question 10

All of the following can be used to make the door skin EXCEPT:

A) aluminum
B) piano wire
C) fiberglass
D) plastic

Question 11

Worn door hinges show up when the two halves of the hinge body shift, allowing up and down door movement.

Question 12

If two lift arms are used in the window regulator, it is usually referred to as a Y-type regulator.

Question 13

____ shatters into small tiny shards or pellets when broken.

A) Laminated plate glass
B) Tempered glass
C) Antilacerative glass
D) Conventional glass

Question 14

A plastic layer called a moisture barrier fits between the inner trim panel and door frame to keep out wind noise and prevent moisture from coming inside.

Question 15

The door skin serves as a guide for the glass to move up and down.

Question 16

If the door intrusion beam is bent or damaged in anyway, the door's shell must be replaced in its entirety.

Question 17

When laminated glass is broken, the plastic material helps to hold the shattered glass in place for increased safety.

Question 18

The ____ is a gear and arm mechanism for moving glass.

A) window regulator
B) door frame
C) door skin
D) door glass

Question 19

Tempered safety glass will shatter into small tiny shards or pellet like shapes when it is broken .

Question 20

The ____ is the outer panel over the door frame.

A) window regulator
B) door skin
C) door glass
D) door frame

Question 21

A ____ typically consists of a large glass sheet, frame assembly, and motor assembly for sliding the glass back into the rear of the roof panel.

A) door skin
B) sunroof assembly
C) caged plate
D) door frame

Question 22

Which of the following statements is LEAST-Likely true?

A) The regulator and its associated parts are sometimes riveted, rather than bolted, to the door structure.
B) Some vehicle windows utilize adjustable guide rollers in a moveable channel.
C) After the door and its glass have been adjusted, you must reinstall all of the door trim pieces and other parts.
D) Tailgate glass is generally secured to a regulator with adhesives.

Question 23

List three methods used to attach the door glass to the window lifting or regulator mechanism.

Question 24

______________________________ consists of two thin sheets of glass with a thin layer of clear plastic between them.

Question 25

How would you perform a door weatherstrip service?

Question 26

List four causes of exterior door handle problems.

Question 27

______________________________ indicate panel misalignment from structural damage, shifted panel fasteners, or
worn mechanical parts (hinges or latches).

Question 28

Which of the following statements is LEAST-Likely true?

A) Compact wagons have a three-way tailgate that swings open like a door or drops down like a truck tailgate.
B) When servicing a door for a keyless entry system, all wiring harness connectors must be disconnected and reconnected carefully.
C) The three-way tailgate can be operated as a tailgate with the glass fully down or as a door with the glass up or down.
D) Some heating elements built onto rear glass can be repaired when damaged.

Question 29

A ____ involves trying to move the door assembly up and down on its hinges.

A) dashboard check
B) caged plate check
C) door hinge check
D) windshield check

Question 30

A(n) _________________________ is often needed to reach under the trim panel to release the plastic clips.

Question 31

All of the following are components of a window regulator EXCEPT:

A) a window crank
B) bushing
C) sash channels
D) a set of gears

Question 32

Why do you think vehicle manufacturers use weld-bond adhesives?

Question 33

When the doors on a sedan need adjusting, start at the ________ door

Question 34

While having a discussion, Technician A says that the use of oil on rubber or felt window channels is highly recommended.Technician B says oil can cause the rubber or felt to swell and deteriorate.Who is correct?

A) A only
B) B only
C) Both A and B
D) Neither A nor B

Question 35

A(n) ____ is a thick, heavy, steel plate with threaded holes to accept large bolts.

A) caged plate
B) cowl panel
C) tailgate
D) air dam

Question 36

The part that will MOST-Likely be housed in a "cage," or box of thin sheet metal spot welded to the body panel is:

A) the striker
B) the body shim
C) the threaded plate
D) the frame bracket

Question 37

_________________________ results when the rear of the door is lower than the front.

Question 38

How would you remove a door lock mechanism?

Question 39

The part that MOST-Likely belongs to a sunroof design is:

A) the torque bolt
B) the cowl panel
C) the air ratchet
D) the drain plate