Deck 3: Shop Orientation

Question 1

The tenth digit of the vehicle identification number indicates the model year.

Answer 1

True

Question 2

Technician A torques critical parts using an impact wrench.Technician B torques critical parts with an air ratchet.Who is correct?

A)A only
B)B only
C)both A and B
D)neither A nor B

Answer 2

D

Question 3

Machine screws can have a(n) _____ head.

A)round
B)fillister
C)oval
D)all answers are correct

Answer 3

D

Question 4

A metric bolt is identified as M10 x 1.50 x 60.What does the 1.50 indicate?

A)bolt length
B)bolt diameter
C)bolt thread pitch
D)bolt head size

Question 5

Technician A says a tap cuts external threads.Technician B says a die cuts internal threads.Who is correct?

A)A only
B)B only
C)both A and B
D)neither A nor B

Question 6

If the number 8.8 is stamped on the head of a bolt, the bolt is a ______ bolt.

A)metric
B)UNC
C)UNF
D)grade 8

Question 7

___________ is the amount of tension that can be applied to the fastener without any permanent damage.

A)Proof load
B)Minimum yield strength
C)Minimum tensile strength
D)Maximum tensile strength

Question 8

____________________, as it is applied to tightening nuts and bolts, is the amount of twisting force applied over distance.

Question 9

Always store click-type torque wrenches with the adjustment set at the __________ possible position.

Question 10

_____________ ______________ lifts are of either a swing-arm type, such as two-post symmetrical and asymmetrical designs, or are a drive-on type, which may use a scissor or four-post design.

Question 11

The first three digits or letters of the VIN number denote the:

A)manufacturer
B)country of origin
C)engine size
D)vehicle model

Question 12

_____________ ___________ lifts have the hydraulic cylinders buried in the concrete and the controls mounted above the ground.

Question 13

Which type of nut is common on steering and suspension components?

A)staked
B)prevailing torque
C)Nylon lock
D)castle

Question 14

Determining bolt size requires measuring the:

A)thread pitch
B)length
C)diameter
D)all answers are correct

Question 15

A 12-point socket provides better grip than a six-point socket.

Question 16

The tire information decal can be found on the driver's door jamb.

Question 17

Die taps are often used for cutting rivet heads.

Question 18

Torx heads use a _______ -sided star-shaped driver.

A)four
B)five
C)six
D)seven

Question 19

The ____________________ wrench has an open-end jaw on one end and a box-end on the other.

Question 20

Allen and Torx drivers are interchangeable.