Deck 8: GDT Concepts

Question 1

A(n) ____________________ is an additional tolerance for a geometric tolerance.

Answer 1

bonus tolerance
bonus

Question 2

Define a worst-case boundary.

Answer 2

A worst-case boundary is a general term used to refer to an inner boundary, outer boundary, or virtual condition boundary. The worst-case boundary affects how parts assemble.

Question 3

What is the main criterion for determining if a worst-case boundary is affected by a geometric tolerance?

Answer 3

The main criterion for determining if a worst-case boundary is affected is whether a geometric tolerance is applied to a feature or a feature of size.

Question 4

What indicates if a geometric tolerance applies to a feature or a feature of size?

Question 5

A(n) ____________________ is a fixed-limit gage used to verify a virtual condition boundary.

Question 6

If geometric tolerances at RFS are applied to an external feature of size, the worst-case boundary is called the inner boundary.

Question 7

Where the MMC modifier is specified in the tolerance portion of a feature control frame, what four items should come to mind?

Question 8

When a feature control frame is associated with a feature, it applies to a surface and does not affect the worst-case boundary.

Question 9

The way to determine which boundary term should be used is if a(n) ____________________ is specified in the feature control frame.

Question 10

Where a geometric tolerance is applied to a feature of size, and it does not override____________________, then two worst-case boundaries will exist.

Question 11

An inner boundary (of an internal feature of size) is a worst-case boundary generated by the smallest feature of size (LMC) minus the effects of the applicable geometric tolerance and any additional tolerance (bonus) that may apply.

Question 12

Where a geometric tolerance at MMC is applied to an external feature of size, the worst-case boundary is called the virtual condition boundary (MMC).

Question 13

Explain the difference between an MMC virtual condition of an external feature of size and an MMC virtual condition of an internal feature of size.

Question 14

Where geometric tolerances, containing the MMC modifier are applied to a feature of size, its worst-case boundary is called a(n) ____________________.

Question 15

An outer boundary (of an external feature of size) is a worst-case boundary generated by the largest feature of size (MMC) plus the effects of the applicable geometric tolerance.