Deck 3: Stationary Power Tools

Question 1

The jointer outfeed table is __.

A) adjustable
B) set to the height of the cutters
C) totally covered by the safety shield
D) all of the above

Answer 1

B

Question 2

____ sanders in the form of a drum, disk, and belt are designed to smooth most any shaped piece of work.

A) Bench
B) Transitional
C) Oscillating spindle
D) Combination

Answer 2

A

Question 3

The size of a table saw is determined by the ____ of the saw blade.

A) diameter
B) metal
C) teeth
D) kerf

Answer 3

A

Question 4

Sliding compound miter saws can only cut miters.

Question 5

A ____ is a precision drilling tool consisting of a base, column, table, and head.

A) shaper
B) molder
C) filer
D) drill press

Question 6

A jointer is used to smooth stock surfaces to remove the marks made by sawing.

Question 7

Fences may be used on __.

A) table saws
B) band saws
C) jointers
D) all of the above

Question 8

Small turning radii while using a band saw requires the use of 3 / 4" bands.

Question 9

The table saw tool best suited for crosscutting is the rip fence.

Question 10

When operating a table saw, proper feed rate is determined by listening to the blade speed.

Question 11

The ____ saw is a tool designed to cut irregular shapes in various thicknesses of material.

A) miter
B) band
C) dado
D) crosscut

Question 12

When ripping a narrow strip a(n) __ is used to safely finish the cut.

A) push stick
B) miter gauge
C) rip fence
D) anti-kick back device

Question 13

The larger sliding compound miter models, although used for finish work, can also cut a 2 x 12 at a __ degree bevel.

A) 60
B) 70
C) 80
D) 90

Question 14

Shapers are used to prepare rough material with ripping and cross cutting operations.

Question 15

Dado sets are used to cut all the way through the stock thickness.

Question 16

It is often safe when operating a table saw to use the rip fence and miter gauge at the same time.

Question 17

A ____ is constructed with two tables: infeed and outfeed.

A) plane
B) sander
C) jointer
D) finisher

Question 18

The band saw cuts with a revolving strip of metal that has teeth.

Question 19

The size of the table saw is determined by the diameter of the saw blade.

Question 20

The common table saw found on the job is the __.

A) 8 inch model
B) 10 inch model
C) 12 inch model
D) 14 inch model

Question 21

Safety shield of a jointer protects the operator from the __________.

Question 22

A tool designed to make repetitive and precise holes in material is called a __________.

Question 23

The term used to describe cutting boards into thinner pieces is called __________.

Question 24

A saw blade designed to make wide cuts partway through the stock thickness is called a __________.

Question 25

A band saw band is held in proper position by __________.

Question 26

The adjustable part of a jointer that determines the depth of cut is called the __________.

Question 27

Always use the rip fence for __________operations.

Question 28

When using a jointer it is best to avoid placing fingers directly over the __________.