Deck 28: Configuring a Compact Logix 1769-L23e, 1769-L32e, or 1769-L35e Ethernet-Ip Driver Using Rslinx

Question 1

If communication was lost between your computer and the Ethernet communications module after the driver has been successfully configured, an X will display on top of the module's icon,

Answer 1

True

Question 2

The Ethernet driver for the CompactLogix Ethernet controller must be configured prior to configuring the personal computer with which communication is desired.

Answer 2

False

Question 3

In the Configure Drivers window, the driver that can only be used to configure a driver for the newer modular Ethernet/IP communications modules for the modular ControlLogix chassis and CompactLogix with Ethernet/IP. is the ____________________ driver.

Answer 3

Ethernet/IP

Question 4

Manually configuring a driver using the Ethernet devices driver can be used to display only the desired Ethernet/IP devices in RSWho.

Question 5

In the event of a failed attempt to configure a driver for an Ethernet module, what is a simple error that may have occurred?

Question 6

Suppose a yellow question mark and text stating unrecognized device are displayed in the RSWho window. Briefly describe the problem and how it can likely be resolved.

Question 7

One feature of the newer Ethernet/IP driver is that RSLinx browses the local subnet, automatically finds devices with compatible IP addresses, and then finishes configuring the driver for you.

Question 8

After a driver has been configured, open the ____________________ window to verify communication has been established with the target device.

Question 9

When configuring a Ethernet/IP driver for a Bulletin 1769 CompactLogix controller using RSLinx, select an Ethernet crossover cable to connect the module and the personal computer.

Question 10

In the Configure Drivers window, the word "running" listed twice for a configured driver verifies communication with the target device.

Question 11

When configuring a driver for a CompactLogix Ethernet module, suppose the personal computer IP address is not available as a selection as an Ethernet interface. What are two checks that can be performed?

Question 12

The older ____________________ driver can be used to configure most Ethernet modules; however, it is typically used for the 1756-ENET module.

Question 13

An RSLinx driver can be deleted at any time and reconfigured to resolve problems with the driver.

Question 14

If desired, the default driver name provided by RSLinx during configuration can be changed in the Add New RSLinx Classic Driver window.

Question 15

What steps can be taken if the word "running" is not listed twice for a configured Ethernet driver in the Configure Drivers window?