Deck 24: Configuring 1756 Control Logix Modular Ethernet Hardware

ملء الشاشة (f)
exit full mode
سؤال
The factory default for switches on the top of the 1756-EN2T and 1756-EN2F modules is ____________________, so on power-up, the module will check and see if DHCP or BOOTP is enabled.
استخدم زر المسافة أو
up arrow
down arrow
لقلب البطاقة.
سؤال
Ethernet speed is measured as mbps, which stands for ____________________.
سؤال
When configuring an Ethernet network, the IP addresses in all devices on the network must be ____________________.
سؤال
Communication with a device on an Ethernet network using Ethernet communications is not possible until an IP address for the device is known or configured.
سؤال
If using a Series 7 controller or newer CompactLogix controller, the ____________________ port is an easy way to access the current configuration of an Ethernet module.
سؤال
ControlLogix modular Ethernet communication module comes from the factory configured as ____________________.
سؤال
The latest generation of Ethernet modules have a(n) ____________________ for temporary connectivity to a personal computer to access, monitor, upload or download, and online edit the RSLogix 5000 project residing in the associated controller.
سؤال
A network containing the newer IP modules and running at 100 mbps can support the addition of an older 1756-ENET module.
سؤال
In the term Ethernet/IP, the "IP" stands for Internet Protocol.
سؤال
The four number groups in an IP address are referred to as octets.
سؤال
Today the most popular network for new applications for information transferring among computers, controllers, and human interface devices or variable frequency drives is ____________________.
سؤال
Briefly compare features that distinguish the ENBT module from the ENET module.
سؤال
Briefly describe the purpose of using the ping command.
سؤال
The three rotary switches on the top of a 1756-EN2T or 1756-EN2F module can be used to manually configure the IP address for the module.
سؤال
In many industrial networks, the module's IP address is configured as ____________________, meaning that the IP address of the device will not change.
فتح الحزمة
قم بالتسجيل لفتح البطاقات في هذه المجموعة!
Unlock Deck
Unlock Deck
1/15
auto play flashcards
العب
simple tutorial
ملء الشاشة (f)
exit full mode
Deck 24: Configuring 1756 Control Logix Modular Ethernet Hardware
1
The factory default for switches on the top of the 1756-EN2T and 1756-EN2F modules is ____________________, so on power-up, the module will check and see if DHCP or BOOTP is enabled.
999
2
Ethernet speed is measured as mbps, which stands for ____________________.
million bits per second
3
When configuring an Ethernet network, the IP addresses in all devices on the network must be ____________________.
compatible
4
Communication with a device on an Ethernet network using Ethernet communications is not possible until an IP address for the device is known or configured.
فتح الحزمة
افتح القفل للوصول البطاقات البالغ عددها 15 في هذه المجموعة.
فتح الحزمة
k this deck
5
If using a Series 7 controller or newer CompactLogix controller, the ____________________ port is an easy way to access the current configuration of an Ethernet module.
فتح الحزمة
افتح القفل للوصول البطاقات البالغ عددها 15 في هذه المجموعة.
فتح الحزمة
k this deck
6
ControlLogix modular Ethernet communication module comes from the factory configured as ____________________.
فتح الحزمة
افتح القفل للوصول البطاقات البالغ عددها 15 في هذه المجموعة.
فتح الحزمة
k this deck
7
The latest generation of Ethernet modules have a(n) ____________________ for temporary connectivity to a personal computer to access, monitor, upload or download, and online edit the RSLogix 5000 project residing in the associated controller.
فتح الحزمة
افتح القفل للوصول البطاقات البالغ عددها 15 في هذه المجموعة.
فتح الحزمة
k this deck
8
A network containing the newer IP modules and running at 100 mbps can support the addition of an older 1756-ENET module.
فتح الحزمة
افتح القفل للوصول البطاقات البالغ عددها 15 في هذه المجموعة.
فتح الحزمة
k this deck
9
In the term Ethernet/IP, the "IP" stands for Internet Protocol.
فتح الحزمة
افتح القفل للوصول البطاقات البالغ عددها 15 في هذه المجموعة.
فتح الحزمة
k this deck
10
The four number groups in an IP address are referred to as octets.
فتح الحزمة
افتح القفل للوصول البطاقات البالغ عددها 15 في هذه المجموعة.
فتح الحزمة
k this deck
11
Today the most popular network for new applications for information transferring among computers, controllers, and human interface devices or variable frequency drives is ____________________.
فتح الحزمة
افتح القفل للوصول البطاقات البالغ عددها 15 في هذه المجموعة.
فتح الحزمة
k this deck
12
Briefly compare features that distinguish the ENBT module from the ENET module.
فتح الحزمة
افتح القفل للوصول البطاقات البالغ عددها 15 في هذه المجموعة.
فتح الحزمة
k this deck
13
Briefly describe the purpose of using the ping command.
فتح الحزمة
افتح القفل للوصول البطاقات البالغ عددها 15 في هذه المجموعة.
فتح الحزمة
k this deck
14
The three rotary switches on the top of a 1756-EN2T or 1756-EN2F module can be used to manually configure the IP address for the module.
فتح الحزمة
افتح القفل للوصول البطاقات البالغ عددها 15 في هذه المجموعة.
فتح الحزمة
k this deck
15
In many industrial networks, the module's IP address is configured as ____________________, meaning that the IP address of the device will not change.
فتح الحزمة
افتح القفل للوصول البطاقات البالغ عددها 15 في هذه المجموعة.
فتح الحزمة
k this deck
locked card icon
فتح الحزمة
افتح القفل للوصول البطاقات البالغ عددها 15 في هذه المجموعة.