Deck 4: Hand Tool Technology

Question 1

ASE-Style Multiple Choice ____ are general tools used by both auto mechanics and auto body technicians.

A)Spreaders
B)Hand tools
C)Squeegees
D)Universal joints

Answer 1

B

Question 2

Never open more than one tool box drawer at the same time.

Answer 2

True

Question 3

ASE-Style Multiple Choice The ____ is a six-point fastener that has the strongest grip and drive torque without fastener damage..

A)dolly
B)breaking bar
C)Torx fastener
D)body spoon

Answer 3

C

Question 4

ASE-Style Multiple Choice Which of the following is LEAST-Likely a socket wrench accessory?

A)a ratchet handle
B)a spinner
C)a drive adapter
D)a spanner

Question 5

A squeegee allows you to lie down and roll under a vehicle while doing underbody repairs.

Question 6

A speed handle allows removing or tightening without removing the socket from the fastener.

Question 7

ASE-Style Multiple Choice A(n)____ wrench is a hex, hexagon, or six-sided wrench.

A)box-end
B)open-end
C)Allen
D)tubing

Question 8

ASE-Style Multiple Choice A ____ is a combined socket and universal joint.

A)flexocket
B)clip puller
C)chisel
D)dolly

Question 9

A six-point socket gives the tightest hold on a hex nut.

Question 10

Pick tools have points on their ends for moving small clips and other parts into alignment.

Question 11

ASE-Style Multiple Choice All of the following represent a type of wrench EXCEPT:

A)the pipe wrench
B)the square wrench
C)the adjustable wrench
D)the combination wrench

Question 12

ASE-Style Multiple Choice The ____ has an open-end jaw on one end and a box-end on the other.

A)box wrench
B)adjustable wrench
C)pipe wrench
D)combination wrench

Question 13

In many situations, a rim wrench is much faster and easier to use than an open-end or box-end wrench.

Question 14

A prying screwdriver has a very thick, strong shank and an angled tip.

Question 15

ASE-Style Multiple Choice The term MOST-Likely used to describe an all-around grabbing and holding tool for working with wires, clips, and pins is:

A)a dolly
B)pliers
C)a wrench
D)a socket

Question 16

ASE-Style Multiple Choice The tip of a ____ has four prongs that fit the four slots in the Phillips screw head.

A)Torx screwdriver
B)socket wrench
C)Phillips screwdriver
D)surform file

Question 17

ASE-Style Multiple Choice A ____ has a single blade that fits a screw with a slotted head.

A)standard screwdriver
B)combination pliers
C)Phillips screwdriver
D)Torx screwdriver

Question 18

The end of the box-end wrench is closed rather than open, for better holding power.

Question 19

Bolt cutters have one sharp cutting jaw that clamps against a blunt or dull jaw.

Question 20

Every auto body repair technician should have two sets of wrenches: one for holding and one for turning.

Question 21

What is the difference between a swivel socket and an impact socket?

Question 22

What is the difference between a spreader and a squeegee?

Question 23

ASE-Style Multiple Choice A ____ is a steel bar with a hardened cutting edge for shearing steel.

A)tin snip
B)chisel
C)scratch awl
D)center punch

Question 24

ASE-Style Multiple Choice The ____ has a pointed tip on one end and usually a flat head on the other.

A)picking hammer
B)dead blow hammer
C)ball peen hammer
D)sledge hammer

Question 25

ASE-Style Multiple Choice The ____ is a small file that is available in numerous shapes.

A)reveal file
B)surform file
C)rivet file
D)panel file

Question 26

What are the disadvantages of a Phillips screwdriver?

Question 27

ASE-Style Multiple Choice A ____ is a tool that cleans and rethreads holes.

A)dolly
B)wrench
C)tap
D)die

Question 28

The advantage of the ____________________ wrench over other wrenches is that it will grab and turn round objects, such as pipes and studs.

Question 29

ASE-Style Multiple Choice While having a discussion, Technician A says that dollies are commonly used to raise low spots in doors, quarter panels, and other sealed body sections.Technician B says that vise grips are used for this purpose. Who is correct?

A)A only
B)B only
C)Both A and B
D)Neither A nor B

Question 30

What is the difference between an aligning punch and a chisel?

Question 31

ASE-Style Multiple Choice Which of the following is LEAST-Likely a type of punch?

A)a center punch
B)a drift punch
C)an aligning punch
D)a panel punch

Question 32

Why is it not advisable to use a screwdriver as a chisel, punch, or pry bar?

Question 33

ASE-Style Multiple Choice While having a discussion, Technician A says that soft sanding blocks are needed on large flat surfaces. Technician B says that soft sanding blocks are needed on curved surfaces or when block sanding paint problems. Who is correct?

A)A only
B)B only
C)Both A and B
D)Neither A nor B

Question 34

ASE-Style Multiple Choice The tool MOST-Likely used to mark parts before they are removed and for marking a spot for drilling is:

A)a surform file
B)a squeegee
C)a pick
D)a center punch

Question 35

The jaws of the ______________________________ will slide around bolts or nuts where there might be insufficient clearance above or on one side to accept a box wrench.

Question 36

A(n)_________________________ is a bit-and-brace-type handle that can quickly turn off a nut or bolt.

Question 37

ASE-Style Multiple Choice All of the following are either door or window tools EXCEPT:

A)the chisel
B)the windshield wiper tool
C)the trim pad remove (GM)r
D)the hot-tip windshield removing kit

Question 38

A(n)______________________________ has a metal face filled with lead shot (balls)to prevent rebounding.

Question 39

Creases in sealed body panels that cannot be reached from the backside can be pulled out with a(n)_________________________.

Question 40

ASE-Style Multiple Choice A ____ is used to remove old body filler, paint, and adhesive as well as to apply body filler and glazing putty when a plastic spreader or squeegee is not appropriate.

A)scraper
B)wire brush
C)bench vise
D)C-clamp