Deck 2: Views

Question 1

____ are drawings that show height.

A) Plans
B) Prints
C) Elevations
D) Topographies

Answer 1

C

Question 2

Other isometric shapes can be sketched by adding to or subtracting from a basic isometric shape.

Answer 2

True

Question 3

In an orthographic projection, each view of an object shows ____ side(s) of the object.

A) one
B) two
C) three
D) four

Answer 3

A

Question 4

A(n) ____ view shows the layout of the object as viewed from above.

A) landscape
B) plan
C) elevation
D) print

Question 5

In an orthographic projection, all surfaces that are parallel to the plane of projection (the surface of the box) are shown in proportion to their actual size and shape.

Question 6

To show all information accurately and to keep all lines and angles in proportion, most construction drawings are drawn by ____ projection.

A) isometric
B) orthographic
C) spherical
D) oblique

Question 7

Isometric drawings are not very useful for construction purposes.

Question 8

In an orthographic projection, if the box is unfolded, the images projected onto its sides will be on a ____.

A) single plane
B) pair of planes
C) sphere
D) plane and two circles

Question 9

In ____ drawings, the most irregular surface is drawn in proportion as though it were flat against the drawing surface.

A) oblique
B) orthographic
C) isometric
D) rectangular

Question 10

A section view shows what would be exposed if a cut were made through the object.

Question 11

A set of drawings for a building usually includes plan views of the site (lot), the floor layout, and the ____.

A) roof
B) foundation
C) walls
D) chimney

Question 12

In an isometric drawing, horizontal lines are drawn at an angle of ____ from horizontal.

A) 15°
B) 20°
C) 25°
D) 30°

Question 13

In an isometric drawing, vertical lines are drawn ____.

A) vertically
B) horizontally
C) 30° from vertical
D) 60° from vertical

Question 14

The accompanying figure shows an ____ drawing.

A) oblique
B) orthographic
C) isometric
D) anisometric

Question 15

The accompanying figure shows an ____ projection.

A) oblique
B) orthographic
C) isometric
D) anisometric

Question 16

Orthographic projection is most often explained by imagining the object to be drawn inside a(n) ____.

A) isometric drawing
B) opaque container
C) glass box
D) brick

Question 17

When an irregular shape is to be shown in a pictorial drawing, an ____ drawing may be best.

A) angular
B) isometric
C) orthographic
D) oblique

Question 18

In oblique drawings, the least irregular surface is drawn in proportion as though it were flat against the drawing surface.

Question 19

In construction drawings, the views are called ____.

A) layouts and plans
B) blues and reds
C) prints and layouts
D) plans and elevations

Question 20

The first step in sketching an isometric drawing of a brick is to ____.

A) sketch a Y
B) sketch the bottom edges
C) mark off the width
D) mark off the length

Question 21

The accompanying figure shows a building ____.

A) elevation
B) plan
C) section
D) floor

Question 22

_____________are also used to show cabinets and interior features.

A) Elevations
B) Oblique drawings
C) Orthographic projections
D) Isometric drawings

Question 23

When an irregular shape is to be shown in a pictorial drawing, an ______________is the best.

A) isometric drawing
B) orthographic drawing
C) elevations
D) section drawing

Question 24

To find the actual shape of two house roofs, whose top view appears similar in size and shape but they are not, one must look at the ___________.

A) rear view
B) front view
C) end view
D) section view

Question 25

A section view is usually referred to simply as a ____.

A) plan
B) section
C) floor
D) slice

Question 26

The water from sinks, laundry areas, and storm water which is less dangerous to the environment is ____________.

A) gray water
B) green water
C) waste water
D) treated water

Question 27

A floor plan is actually a section view of the building, that is ____________.

A) an imaginary cut made at a level that passes through all windows and doors.
B) the floor plan shows what is left when the top is removed.
C) Both A and B.
D) None of these are correct.

Question 28

A floor plan is a type of ____ view.

A) full
B) oblique
C) elevation
D) section

Question 29

Because not all features of construction can be seen in plan views and elevations from the outside of a building, many construction drawings are ____ views.

A) section
B) orthographic
C) comprehensive
D) foundation

Question 30

Waste water is classified as either black water or ____ water.

A) white
B) gray
C) green
D) blue