Deck 17: Edge Welds

Question 1

The edge weld symbol may be shown having an arrow side, other side, or both sides significance.

Answer 1

True

Question 2

The edge weld symbol shall only be used in conjunction with flare-groove and flare-bevel symbols.

Answer 2

False

Question 3

The edge weld symbol is particularly used for ____ joinery.

A) sheet metal
B) plate metal
C) pipe
D) billet

Answer 3

A

Question 4

When the edge weld symbol has a both sides application only, the symbols are placed together on the reference line.

Question 5

An edge weld symbol may also be applied to an edge ____________________.

Question 6

The flare V-groove and flare-bevel groove symbols are used in combination with the edge weld symbol to ____________________ the welded joint.

Question 7

The flange butt and corner flange weld symbols are identified as ____ to which the edge weld symbol is applied.

A) joins
B) joints
C) edges
D) abutments

Question 8

Sheet metal joinery uses welding metal ____ inches or less in thickness.

A) 1/16
B) 3/16
C) 1/8
D) 3/8

Question 9

The ____________________ weld symbol has a both sides application only to an edge joint.

Question 10

When the weld is to be specified for a particular length, dimensions within the ____________________ lines are used.

Question 11

Dimensions that may be added to the edge weld symbol are size, length, and spacing (pitch of intermittent welds).

Question 12

The edge weld symbol has many of the elements applied to other weld symbols-size, length, pitch, weld-all-around, weld-in-field, finishing and methods of finishing welds.

Question 13

Applicable length and pitch dimensions are placed on the ____ side of each symbol.

A) top
B) bottom
C) right
D) left

Question 14

____ lines may also be applied to a detail drawing to indicate lengths to be welded.

A) Hashing
B) Crossed
C) Parallel
D) Hatching

Question 15

To specify a ____ intermittent edge weld, the edge weld symbol is applied to the welding symbol.

A) group
B) batch
C) choppy
D) chain

Question 16

When specifying the length and spacing of intermittent edge welds, the dimensions are placed to the ____ side of the weld symbol.

A) bottom
B) top
C) right
D) left

Question 17

For staggered intermittent edge welds, the edge weld symbol is shown ____.

A) adjoining
B) offset
C) adjacent
D) parallel

Question 18

When specifying the length and spacing of intermittent edge welds, the first dimension represents the ____ of the weld.

A) length
B) pitch
C) width
D) spacing

Question 19

When specifying the length and spacing of intermittent edge welds, the second dimension represents the ____________________.

Question 20

The ____ weld symbol has replaced the flange butt and corner flange weld symbols, which have become obsolete.

A) side-edge
B) weld-edge
C) edge
D) margin