Deck 3: Notes and Specifications

Question 1

A(n) ____________________ note applies to the drawing as a whole and is placed in an open space away from the views so that it can be seen readily.

Answer 1

general

Question 2

The mechanical drawing sheet identified by the letter ____ is 11" by 17".

A) A
B) B
C) D
D) E

Answer 2

B

Question 3

To conserve space on the print, and to save time in preparing the drawing, a note is often shown as a(n) ____.

A) sign
B) symbol
C) mark
D) icon

Answer 3

B

Question 4

When many specifications are required, they are included on a separate sheet and referenced to the drawing.

Question 5

A(n) ____ indicates the exact point of reference.

A) identifier
B) icon
C) leader
D) design point

Question 6

When a note applies to a particular part on an object, it is called a(n) ____ note.

A) general
B) area
C) identifying
D) local

Question 7

In many cases, it is not possible to give all the information needed on a print by the combined use of lines and dimensions.

Question 8

To provide additional information on a print, ____ are used.

A) notes and details
B) notes and specifications
C) details and specifications
D) notes and materials

Question 9

The mechanical drawing sheet identified by the letter ____________________ is 11" by 22".

Question 10

Specifications are often located near the views to which they refer.

Question 11

A(n) ____________________ explains, specifies, or refers to the material and/or process needed to make the part.

Question 12

When a specification is general and applies to all or several views, it may be placed within a ruled space called a(n) ____________________ block.

Question 13

The mechanical drawing sheet identified by the letter ____ is 22" by 34".

A) A
B) B
C) D
D) E

Question 14

The mechanical drawing sheet identified by the letter ____ is 8 1/2" by 11".

A) A
B) B
C) D
D) E

Question 15

When specifying materials, the word "specification" is always used.

Question 16

A(n) ____ is lettered information (in capital letters) concerning the details of construction.

A) detail
B) symbol
C) note
D) icon

Question 17

An explanatory note is placed near one of the views representing the part.

Question 18

When a note specifies the material required, the welding process to be used, the type and size of electrode, and/or the kind and size of welding rod, it is called a ____.

A) specification
B) measurement
C) design
D) condition

Question 19

The mechanical drawing sheet identified by the letter ____ is 34" by 44".

A) A
B) B
C) D
D) E

Question 20

When a specification is placed within a title block, it is usually denoted as such by prefacing the information with the word "____________________."