Deck 5: Bill of Materials

Question 1

The list or bill of materials enables some other person, such as a stockroom attendant, a welder's helper, or the operator of flamecutting equipment, to cut or otherwise prepare the various stock pieces needed to fabricate the object.

Answer 1

True

Question 2

Many companies use a Project ____________________ worksheet in one form or another to track the progress and costs of a project.

Answer 2

Summary

Question 3

The second number in the AISI-SAE classification system represents the nominal percentage of the ____________________ component.

Answer 3

alloying

Question 4

A bill of materials basically consists of the size (length, width, and thickness), the kind of material, the part name or item number, and the number of pieces required.

Question 5

Metal plate is greater than ____ inches in thickness.

A) 3/18
B) 3/16
C) 5/18
D) 5/16

Question 6

An AISI-SAE classification for a type of steel consists of either three or four numbers.

Question 7

Sheet metal is defined as metal ____" or less in thickness and more than 6" in width.

A) 3/16
B) 5/16
C) 3/8
D) 5/8

Question 8

The last two or three numbers in the AISI-SAE classification system indicate the ____.

A) nominal percentage of the alloying component
B) basic type of steel
C) actual percentage of carbon content
D) nominal percentage of carbon content

Question 9

When dimensioning the part(s) for fabrication you would need to consider the part in relation to the whole.

Question 10

In the American Society for Testing and Materials system, the letter "____" is used to identify ferrous metals.

A) A
B) B
C) F
D) M

Question 11

When it is necessary to specify a particular type of steel in a bill of material, it is often identified by a(n) ____ classification number.

A) SAE-AISI
B) SAE
C) AISI
D) AISI-SAE

Question 12

High carbon steel has a carbon content of ____.

A) )30% and less
B) )30% to .50%
C) )50% to .90%
D) )80% to 1.50%

Question 13

Low carbon steel has a carbon content of ____.

A) )30% and less
B) )30% to .50%
C) )50% to .90%
D) )80% to 1.50%

Question 14

For complex or irregularly shaped objects, ____________________ may be added to the bill of materials to fully describe certain parts.

Question 15

The width of a(n) ____________________ stock does not exceed 8 inches.

Question 16

In the American Society for Testing and Materials system, the letter "____________________" is used for nonferrous metals.

Question 17

Bills of materials may be included as a part of a ____.

A) Summary Sheet
B) Project Summary Worksheet
C) Project Worksheet
D) Project Summary

Question 18

Both plate and sheet are available in widths up to ____ inches.

A) 100
B) 150
C) 200
D) 250

Question 19

The first number in the AISI-SAE classification system indicates the ____.

A) nominal percentage of the alloying component
B) basic type of steel
C) actual percentage of carbon content
D) nominal percentage of carbon content

Question 20

The designer/drafter is seldom required to prepare a list or bill of materials along with weldment drawings.