Deck 18: Working Drawings

Question 1

Layout assembly drawings provide more accurate and refined dimensions than design assembly drawings.

Answer 1

False

Question 2

Phantom lines are used to depict adjacent parts in diagram assembly drawings.

Answer 2

True

Question 3

Detail drawings for different parts should always be placed on the same sheet as long as there is enough room.

Answer 3

False

Question 4

A _____ assembly drawing may be substituted for a multiview assembly drawing if the product is not complex or if it is intended for nontechnical interpretation.

A) subassembly
B) design
C) diagram
D) pictorial

Question 5

Working drawings may include many layers of subassembly drawings.

Question 6

Erection assembly drawings include detailed information relating to structural members.

Question 7

A drawing that shows the relationship of two or more parts of a product is a(n) _____ drawing.

A) pictorial
B) assembly
C) detail
D) preliminary

Question 8

What type of drawings are used in the construction industry and include all information necessary for putting up structural framework?

A) erection assembly drawings
B) subassembly drawings
C) operation assembly drawings
D) installation assembly drawings

Question 9

Uniform standards must be used for all detail drawings of all parts.

Question 10

A layout assembly drawing shows the overall size, form, location, and relationship of every component of a product.

Question 11

A _____ assembly drawing is a fully dimensioned and noted drawing used directly in the manufacturing process.

A) layout
B) pictorial
C) design
D) working

Question 12

What are the two general categories of working drawings?

A) diagram drawings and erection drawings
B) installation drawings and operation drawings
C) detail drawings and assembly drawings
D) operation drawings and pictorial drawings

Question 13

Which type of assembly drawing shows how to assemble a product?

A) design assembly drawing
B) installation assembly drawing
C) subassembly drawing
D) erection assembly drawing

Question 14

Operation assembly drawings identify multiple positions of moving parts using _____, sections, and enlarged details.

A) hidden lines
B) phantom lines
C) stitch lines
D) chain lines

Question 15

A(n) _____ assembly drawing shows the form and location of all subassemblies with multiview drawings.

A) installation
B) subassembly
C) diagram
D) operation

Question 16

What type of assembly drawing shows rough preliminary ideas?

A) outline
B) layout
C) working
D) general

Question 17

The manufacture of each part requires a working drawing containing specifications for its manufacture.

Question 18

A(n) _____ drawing contains information relating to the manufacture of parts.

A) detail
B) assembly
C) preliminary
D) pictorial

Question 19

Pictorial drawings are usually used to convey manufacturing details.

Question 20

Specialized detail drawings are often prepared in separate sets for different manufacturing operations.

Question 21

Imagine that you have been asked to illustrate how the product being designed works mechanically. Which type of drawing should you prepare?

A) diagram assembly drawing
B) operation assembly drawing
C) erection assembly drawing
D) outline assembly drawing

Question 22

Pictorial drawings may be used as working drawings:

A) always
B) never
C) only when depicting a very small part or component
D) if the exact shape and necessary dimensions can be clearly shown

Question 23

Which statement about assembly drawings is correct?

A) They contain as much detail as detail drawings.
B) The type of assembly drawing used depends on its use during manufacturing.
C) They are typically prepared with hidden lines.
D) There are three basic types of assembly drawings.

Question 24

Which statement about working drawings is correct?

A) They provide broad, general information about the product.
B) They are only used during the fabrication stage of manufacturing.
C) They must include all information needed to manufacture the product.
D) They should never include information such as material descriptions and finishing methods.

Question 25

Imagine that you are preparing an orthographic drawing of a parts list. What type of drawing are you creating?

A) general assembly drawing
B) standard detail drawing
C) installation assembly drawing
D) layout assembly drawing

Question 26

Which type of drawing is often drawn in exploded-view form?

A) outline assembly drawing
B) pictorial assembly drawing
C) general assembly drawing
D) design assembly drawing

Question 27

When preparing working drawing dimensions, you should NOT:

A) specify the size and form of the final product
B) select and place dimensions to ensure no further calculations are required
C) use the same standards for tolerancing for all related drawings
D) specify specific manufacturing processes

Question 28

Imagine that you need to show the smallest assembled components that are parts of a larger component of a product. What type of drawing should you prepare?

A) subassembly working drawing
B) erection assembly drawing
C) installation assembly drawing
D) layout assembly drawing

Question 29

A design assembly drawing is a refined version of a(n) _____ assembly drawing.

A) subassembly
B) installation
C) diagram
D) layout

Question 30

Imagine that you are creating an outline assembly drawing. What should you do?

A) include numerous notations
B) detail symmetrical objects on both sides
C) show only the basic positioning of the subassemblies
D) include both multiview drawings and a pictorial drawing