Deck 37: Introduction to Geometric Dimensioning and Tolerancing

Question 1

Geometric tolerancing controls geometric characteristics of parts such as circularity, runout, position, etc.

Answer 1

True

Question 2

Points have position but no size and therefore cannot be measured or dimensioned.

Answer 2

True

Question 3

A geometric tolerance is the maximum permissible variation of form, orientation, or ____ of a feature from that indicated or specified on a drawing.

A) size
B) fit
C) location
D) strength

Answer 3

C

Question 4

The geometric characteristic symbol for position is ____.

A)
B)
C)
D)

Question 5

When manufactured, the actual size of a feature must be close to the size limits specified on the drawing.

Question 6

The geometric characteristic symbol for angularity is ____.

A)
B)
C)
D)

Question 7

Geometric tolerances are required for every feature of a part.

Question 8

In a feature control frame, the compartment on the extreme left contains ____.

A) allowable tolerance
B) geometric characteristic symbol
C) specification of data
D) tolerance value

Question 9

A technical drawing must indicate the permissible variation of size and form.

Question 10

Maximum material condition involves the smallest hole size along with the ____________________ shaft size.

Question 11

An accurate and useful technical drawing must fully describe the shape of the part, the size of the part, and the ___________________________________.

Question 12

The symbol stands for ____________________.

Question 13

Squareness, roundness, and flatness are characteristics of ____________________ on a technical drawing.

Question 14

A geometric tolerance is used to state functional or ______________________________ requirements of a part.

Question 15

The geometric characteristic symbol for symmetry is ____.

A)
B)
C)
D)