Deck 2: CA Unified Infrastructure Management 8.x Professional

Question 1

You just installed the UMP, opened it for the first time, and now need to define Service Level Agreements (SLAs). What should you do? (Choose two.)

A) Purchase a license because this is an optional component.
B) Add the SLA reports portlet, log out, and log in again.
C) Add a page and add the SLM portlet to this page.
D) Log in as an administrator or any user with SLM Admin permission.

Answer 1

B,C

Question 2

You have created a drop-down menu with several dashboards. Another UMP user wants to use this menu with its dashboards. She asks you to send her the files. Which step should you perform?

A) Export the menu pages to a .lar file for her to import.
B) Export the dashboard .xml files for her to import.
C) Send her the default .lar file and the dashboard .xml files.
D) Export the dashboard .xml files and menu pages for her to import.

Answer 2

B

Question 3

CA UIM server components automate the discovery of hosts and devices throughout your network. For discovery, which protocols are supported?

A) Link Layer Discovery Protocol (LLDP) and IEEE 802.1AB
B) Simple Service Discovery Protocol (SSDP), Neighbor Discovery Protocol (NDP), and Cisco Discovery Protocol (CDP)
C) SSH, WMI, SNMP, and Internet Control Message Protocol (ICMP) ping
D) Telnet, FTP, DNS, and Windows Management Instrumentation (WMI)

Answer 3

A

Question 4

In CA UIM 8.5.1. which probes are covered by Monitoring Configuration Service (MCS) templates? (Choose three.)

A) snmpcollector
B) vmware
C) vmax
D) cdm and ntevl
E) dirscan

Question 5

You check the contents of a package in the archive and notice that it only contains a single file with a .cfx extension. What can you conclude from this?

A) It was incorrectly archived.
B) It will automatically download binary files when deployed.
C) It is a Configuration Only package.
D) It is a SuperPackage.

Question 6

When you build an Auto-Operator (AO) profile, which action do you perform?

A) Specify which HTML template to use, such as customtemplate.html.
B) Specify an action type, such as "command".
C) Specify an authentication protocol, such as wmi.
D) Specify which Quality of Service (QoS) data to use, such as Processor Queue Length.

Question 7

You are attempting to set up monitoring on servers running Red Hat SELinux 7.1. You are unable to turn off the iptables firewall. After getting a Linux robot up and running, you notice that the controller, spooler, and hdb robot probes all have green ports in infrastructure Manager and the controller and remote hub show no errors. However, you cannot open the controller GUI or contact it through the hub-to-robot connection. Only the connection from the robot to the hub, port 48002, works using Telnet. To address this issue, what do you need to do?

A) Run the service iptables stop command.
B) Run the /bin/systemctl stop iptables.service command.
C) Create the following firewall rule on the local Linux server: ACCEPT tcp - anywhere anywhere state NEW tcp dpt:48000-48100
D) Run the /etc/init.d/niminit start-persistent command.

Question 8

You are a CA UIM administrator in a financial organization. Your manager wants you to manage and monitor the highly secure network zone. The security policies do not allow any traffic to and from the highly secure network zone over the non-standard firewall policies. The ports above 48000, which are used for CA UIM communications, are considered to be nonstandard ports. To deploy bulk robots using CA UIM, which tasks are required? 1. Deploy a hub in the secure network zone and set up a tunnel. 2. Deploy a hub in the secure network zone but do not apply any probes to it. 3. Deploy the discovery_agent probe on the hub in the secure network zone. 4. Deploy the automated_deployment_engine (ade) probe on the hub in the secure network zone. 5. Ensure that HTTPS port 443 is open between the hub in the secure network zone and the tunnel server.

A) 2 only
B) 1, 3, 4, and 5 only
C) 1, 3, and 4 only
D) 1 and 2 only

Question 9

Which port must be opened for the automatic_deployment_engine (ade) probe to deploy a robot on a UNIX system?

A) 48002
B) 48000
C) 80
D) 22

Question 10

By creating sites in the UMP, you can:

A) assign pages to multiple users and groups of users.
B) enable account contacts to log in to Infrastructure Manager.
C) configure an approval process for reports, dashboards, and lists.
D) group SNMPv1 devices with common security credentials.

Question 11

When you create a tunnel certificate, what do you populate the Common Name field with?

A) The IP address of the secondary hub
B) The IP address of the primary hub
C) The IP address of the tunnel server hub
D) The IP address of the tunnel client hub

Question 12

In response to the needs of a specific customer, you create a group in Unified Service Manager (USM) with 600 servers. The group is populated with some baseline Monitoring Configuration Service (MCS) profiles for the cdm and processes probes. However, the customer subsequently tells you that 10 of the 600 servers require slightly different thresholds. Which action do you recommend?

A) For each of the 10 servers, put the servers into maintenance.
B) Create another USM group for the 10 servers with the profiles copied from the baseline group and create new profiles with a higher priority to override.
C) Create another group for these servers, with MCS profiles with different thresholds and the same priority.
D) Use the Admin Console or Infrastructure Manager to override the monitoring configuration directly on the probes for the 10 servers.

Question 13

Which methods are valid for populating the snmpcollector? (Choose three.)

A) Connect to the discovery_agent.
B) Create a .json seed file and recycle the probe.
C) Configure the collector to connect to the discovery_server.
D) Specify the OID to collect in the profile.
E) Manually create the profile.

Question 14

You can save time during robot deployment by using an answer file, which can be used with the CA UIM native installer or third-party tools. Which variables are REQUIRED in the answer file? (Choose four.)

A) domain
B) hubip
C) robotip
D) hubrobotname
E) hub

Question 15

You completed the nimldr installation on several Linux distributions. Now you need to enable the nimbus service. Which Linux command should you run to enable the service?

A) systemctl enable nimbus.service
B) /etc/init.d/niminit start
C) /opt/nimsoft/bin/niminit run
D) /nimldr -I NMS_server_name_or_IP_address

Question 16

In Unified Services Manager (USM), you are attempting to discover Linux/UNIX servers on a remote site using the Discovery Wizard. However, no servers are discovered. You know that several servers exist at the remote site, as does a firewall with TCP ports 48000 to 48030 open. Earlier, you successfully deployed robots on Windows and Linux target servers. In addition, Quality of Service (QoS) data is visible. Why is the Discovery Wizard failing to locate the servers?

A) SSL needs to be enabled.
B) Windows Management Instrumentation (WMI) port 160 is closed.
C) The discovery profile needs to be deleted and re-created.
D) Internet Control Message Protocol (ICMP) is not enabled across the firewall.

Question 17

For robots configured behind a firewall, which ports must be opened for robots in proxy mode? (Choose two.)

A) Robot to hub: Ports 48000, 48001, and 48002
B) Hub to robot: Ports 48000, 48001, and 48002
C) Robot to hub: Port 48000
D) Hub to robot: Port 48000

Question 18

CA UIM fails to communicate with a device hosted on a network protected by a firewall. Which command is used to test the routing from the CA UIM server to the device and from the device to the CA UIM server?

A) Powershell
B) Perl
C) tracert
D) Telnet

Question 19

You are a CA UIM administrator in a financial organization. Your company provides and hosts agency services in a highly secure network. In some cases, one operating system is shared to host multiple services for multiple agencies. Your manager has assigned you the task of managing and monitoring each server. However, this must be done independently for each agency. You can deploy multiple robots on each server to independently monitor the services for each agency. For the successful deployment of multiple robots, which steps must be included in your configuration plans? (Choose four.)

A) Delete all lines that begin with magic_key from the controller.cfg file before you copy the file to a new robot.
B) Ensure that the value of the controller_port setting on each robot is 48000.
C) Clear the niscache folder contents before copying the robot configuration.
D) Delete all lines that begin with magic_key from the robot.cfg file before you copy the file to a new robot.
E) Create a new service for each new robot.
F) Configure each robot on a server with a unique port range.

Question 20

In your CA UIM infrastructure, the primary and remote hubs are connected through a firewall. To deploy robots automatically from the remote hub for deployment inside the firewall, which steps do you need to perform? (Choose three.)

A) Deploy the automated_deployment_engine (ade) probe to the remote hub, where ports are not blocked.
B) Instead of logging in to Infrastructure Manager from the primary hub, log in directly from the remote hub.
C) Drag the robot packages for deployment to the archive on the remote hub.
D) Deploy the ade and discovery_agent probes on a cloud-installed robot.
E) Create a package with the silent installer in it.

Question 21

If a new hub is installed on the same network as the primary hub and the new hub is not appearing in the CA UIM GUIs, which troubleshooting steps are needed? (Choose two.)

A) On the primary hub and on the new hub, check the robot.cfg and hub.cfg files and make sure the domain is exactly the same.
B) Ensure that all hub IP addresses are in a common host file.
C) Configure DNS reverse lookup.
D) On the hub GUI, on the Name Services tab, set up the named IP.

Question 22

UMP administrator Heather Marley signs in to the UMP and navigates to the Site Settings page where she specifies a friendly URL and the domain name that will be used for public and private pages. What is Heather configuring?

A) An automatic HTTPS redirect
B) A virtual host
C) An account-aware report
D) A custom Dashboard

Question 23

Which CA UIM Alarm Server (NAS) feature can be enabled automatically on a secondary NAS during HA failover?

A) Bidirectional forwarding
B) NiS bridge
C) Auto-Operator (AO)
D) Pre-processing rule enablement

Question 24

You create an account for ClientA with ownership limited to the corresponding origin, and you add Bruce Adams as a contact for the account. You assign a ClientAOperator access control list (copied from the Operator ACL) to Bruce. When Bruce logs in to the UMP for the first time:

A) he will receive an error message if he attempts to access Performance Reports Designer (PRD).
B) he will be prompted to create his first custom dashboard.
C) he will be prompted to select which elements will appear in the tree view.
D) he will only be able to view machines with an origin of ClientA.