Deck 6: Shop Safety

Question 1

What do you call the technicians protective head cover?

A)Helmet
B)Hat
C)Bump cap
D)Cap

Answer 1

Bump cap

Question 2

All safety glasses should meet standards set by ________.

A)ANSI
B)SAE
C)DOT
D)ASE

Answer 2

ANSI

Question 3

When washing hands, water should be at what temperature?

A)110 deg F
B)98 deg F
C)125 deg F
D)135 deg F

Answer 3

110 deg F

Question 4

Hearing protection should be worn any time the noise level exceeds ________.

A)70 dB
B)60 dB
C)90 dB
D)80 dB

Question 5

Two technicians are discussing the safe use of a wrench. Technician A says that a wrench should be pulled toward you. Technician B says a wrench should be pushed away from you. Which technician is correct?

A)Technician A only
B)Technician B only
C)Both technicians A and B
D)Neither technician A nor B

Question 6

Exhaust hoses should be used because one of the exhaust gasses can be deadly in high concentrations. This gas is ________.

A)Carbon monoxide
B)Hydrocarbons
C)Oxides of nitrogen
D)Carbon dioxide

Question 7

The process of combustion occurring without an open flame is called ________.

A)Cold fusion
B)Direct ignition
C)Non-flame combustion
D)Spontaneous combustion

Question 8

When using a fire extinguisher, what word can be used to remember what to do?

A)RED
B)LEVER
C)FIRE
D)PASS

Question 9

What type of fire extinguisher is usable for most types of fires?

A)Water
B)CO
C)CO₂
D)Dry chemical

Question 10

Which item is usually NOT included in a first aid kit?

A)Bandages
B)Antibiotic cream
C)Fire blanket
D)Eye wash solution

Question 11

Technician A says that leather shoes offer more protection than canvas shoes. Technician B says that steel toed boots are essential to protecting your feet from injury. Which technician is correct?

A)Technician A only
B)Technician B only
C)Both technicians A and B
D)Neither technician A nor B

Question 12

Which type of glove is damaged by contact with petroleum products or solvents?

A)Latex
B)Nitrile
C)Both A and B
D)Neither A nor B

Question 13

What type of gloves provide thermal protection?

A)Mechanics gloves
B)Latex gloves
C)Nitrile gloves
D)None of these

Question 14

How might a ring be a safety hazard?

A)It could get caught on a moving part
B)It could become a path for an electrical circuit
C)Both A and B
D)Neither A nor B

Question 15

A typical lawnmower should be used with hearing protection

Question 16

Technician A lifts a heavy load using leverage away from his body. Technician B lifts a load keeping it close to his body. Which technician is correct?

A)Technician A only
B)Technician B only
C)Both technicians A and B
D)Neither technician A nor B

Question 17

Technician A says to always push heavy objects. Technician B says to always pull heavy objects. Which technician is correct?

A)Technician A only
B)Technician B only
C)Both technicians A and B
D)Neither technician A nor B

Question 18

A proper working height is ________.

A)At knee height
B)Above your head
C)At waist height
D)None of these

Question 19

Technician A says that containers for dirty shop rags should be made of metal. Technician B says that these containers should have a lid that stays closed. Which technician is correct?

A)Technician A only
B)Technician B only
C)Both technicians A and B
D)Neither technician A nor B

Question 20

When pounding an aluminum part, it is best to pound with ________.

A)A steel hammer
B)An iron hammer
C)A plastic mallet
D)None of these

Question 21

Which type of cleaning uses small living organisms to eat hydrocarbons?

A)High pressure spray
B)Solvent
C)Microbe
D)None of these

Question 22

Technician A uses a face shield when using any type of pressure or chemical procedure. Technician B uses protective gloves when working with solvents. Which technician is correct?

A)Technician A only
B)Technician B only
C)Both technicians A and B
D)Neither technician A nor B

Question 23

Technician A uses three prong electrical cords when possible. Technician B uses double insulated electrical tools. Which technician is correct?

A)Technician A only
B)Technician B only
C)Both technicians A and B
D)Neither technician A nor B

Question 24

Which substances can be used as abrasives for cleaning?

A)Walnut shells
B)Steel shot
C)Both A and B
D)Neither A nor B

Question 25

Batteries should not be tipped to more than a ________ angle.

A)60 degree
B)5 degree
C)45 degree
D)None of these

Question 26

There are ________ classes of fire extinguishers.

A)4
B)6
C)8
D)3

Question 27

Which type fire extinguisher may damage electronic components?

A)Dry chemical
B)CO₂
C)Both A and B
D)Neither A nor B

Question 28

Technician A says that an eyewash station should be located in the corner out of the way. Technician B says that an eyewash station should be located in a central area. Which technician is correct?

A)Technician A only
B)Technician B only
C)Both technicians A and B
D)Neither technician A nor B

Question 29

Technician A says that eye contamination should be treated by flushing with water. Technician B says that professional help should be involved in the event of eye contamination. Which technician is correct?

A)Technician A only
B)Technician B only
C)Both technicians A and B
D)Neither technician A nor B

Question 30

An OSHA approved air nozzle limits pressure at the outlet to ________.

A)30 or 60 PSI, depending on the air supply
B)110 PSI
C)30 PSI
D)None of these

Question 31

When jump-starting a vehicle, which of these connections is the last connection to be made?

A)A
B)B
C)C
D)D