Deck 4: Energy Analysis of Closed Systems

Question 1

A frictionless piston-cylinder device and a rigid tank contain 5 kg of helium gas at the same temperature, pressure and volume. Now heat is transferred, and the temperature of both systems is dropped by 12°C. The amount of extra heat that must be supplied to helium gas in the cylinder that is maintained at constant pressure is

A)125 kJ
B)0 kJ
C)312 kJ
D)187 kJ
E)499 kJ "

Answer 1

125 kJ

Question 2

A 1.2-m³ rigid tank contains nitrogen gas at 200 kPa and 350 K. Now heat is transferred to the nitrogen in the tank and the pressure of nitrogen rises to 900 kPa. The work done during this process is

A)840 kJ
B)0 kJ
C)156 kJ
D)240 kJ
E)1080 kJ

Answer 2

0 kJ

Question 3

An 8-L cylinder contains air at 300 kPa and 300 K. Now air is compressed isothermally to a volume of 2 L. The work done on air during this compression process is

A)119 kJ
B)1.8 kJ
C)3.3 kJ
D)4.5 kJ
E)0 kJ

Answer 3

3.3 kJ

Question 4

A cylinder contains 2 kg of steam at 200 kPa and 200°C. Now steam is compressed at constant pressure until its temperature rises to 250°C. The work done during this compression process is

A)24 kJ
B)0 kJ
C)92 kJ
D)138 kJ
E)47 kJ

Question 5

A piston-cylinder device contains 3.2 kg of R-134a at 400 kPa and 50°C. Now R-134a is allowed to expand at constant pressure until its temperature drops to 10°C. The work done during this expansion process is

A)13 kJ
B)0 kJ
C)4.2 kJ
D)33 kJ
E)58 kJ

Question 6

Air in a piston-cylinder device is compressed from 25°C and 100 kPa to 500 kPa during a polytropic process for which Pv^1.3 = constant. The air temperature after compression is

A)33°C
B)156°C
C)1207°C
D)115°C
E)182°C

Question 7

A well-sealed room contains 90 kg of air at 1 atm and 20°C. Now a 1-kW electric heater and a 200-W fan are turned on. If heat transfer through the walls is negligible, the air temperature in the room in 15 min will be

A)36.7°C
B)31.9°C
C)33.9°C
D)20.3°C
E)49.5°C

Question 8

An air-tight room contains 80 kg of air, and a 2-kW baseboard electric resistance heater in the room is turned on and kept on for 15 min. The temperature rise of air at the end of 15 min is

A)22.4°C
B)31.3°C
C)0.52°C
D)13.4°C
E)42.8°C

Question 9

A room contains 25 kg of air at 100 kPa and 10°C. The room has a 250-W refrigerator (the refrigerator consumes 250 W of electricity when running) and 1-kW electric resistance heater. During a cold winter day, it is observed that both the refrigerator and the resistance heater are running continuously but the air temperature in the room remains constant. The rate of heat loss from the room during that day is

A)3600 kJ/h
B)2700 kJ/h
C)4500 kJ/h
D)1000 kJ/h
E)1250 kJ/h

Question 10

A piston-cylinder device contains 3 kg of air at 300 kPa and 25°C. During a quasi-equilibrium isothermal expansion process, 20 kJ of boundary work is done by the system, and 8 kJ of paddle-wheel work is done on the system. The heat transfer during this process is

A)28 kJ
B)20 kJ
C)36 kJ
D)12 kJ
E)4 kJ

Question 11

A piston-cylibder device equipped with a resistance heater is initially filled with 0.4 kg of saturated water vapor at 200°C. Now the heater is turned on, the steam is compressed, and there is heat loss to the surrounding air. At the end of the process, the temperature and pressure of steam in the container are measured to be 300°C and 0.5 MPa. The net energy transfer to the steam during this process is

A)208 kJ
B)56 kJ
C)75 kJ
D)109 kJ
E)83 kJ

Question 12

A bucket of water with a mass of 20 kg at 18°C is to be cooled to 0°C by dropping ice cubes at 0°C into it. The latent heat of fusion of ice is 334 kJ/kg, and the specific heat of water is 4.18 kJ/kg.°C. The amount of ice that needs to be added is

A)4.5 kg
B)0.25 kg
C)10 kg
D)20 kg
E)8.6 kg

Question 13

A 1-kW electric resistance heater submerged in 10-kg water is turned on and kept on for 15 min. During the process, 400 kJ of heat is lost from the water. The temperature rise of water is

A)21.5°C
B)12.0°C
C)31.1°C
D)50.0°C
E)8.8°C "

Question 14

1.5 kg of liquid water initially at 10°C is heated to 60°C in a teapot equipped with a 1000 W electric heating element inside. The minimum time it takes to heat the water to the desired temperature is

A)3.5 min
B)7.3 min
C)5.2 min
D)16.0 min
E)11.4 min

Question 15

Eggs with a mass of 0.12 kg per egg and a specific heat of 3.32 kJ/kg.°C are cooled from 30°C to 10°C at a rate of 800 eggs per minute. The rate of heat removal from the eggs is

A)8.0 kW
B)53 kW
C)478 kW
D)106 kW
E)159 kW

Question 16

An orange with an average mass of 0.20 kg and average specific heat of 3.70 kJ/kg.SYMBOL 176 \f "Symbol"C is cooled from 20°C to 5°C. The amount of heat transferred from the orange is

A)7.4 kJ
B)24.8 kJ
C)18.5 kJ
D)55.5 kJ
E)11.1 kJ

Question 17

Steel balls at 150°C with a specific heat of 0.50 kJ/kg.°C are quenched in an oil bath to an average temperature of 70°C at a rate of 15 balls per minute. If the average mass of steel balls is 1.2 kg, the rate of heat transfer from the balls to oil is

A)22.5 kJ/s
B)12 kJ/s
C)48 kJ/s
D)10.5 kJ/s
E)2880 kJ/s