Deck 8: Sections

Question 1

The sections shown on a print may not be full sections, but rather may be sections that represent only portions of the part.

Answer 1

True

Question 2

A broken-out section, like other sections, is used to show the ____________________ of a part.

Answer 2

interior

Question 3

The primary purpose of a ____ is to show how the parts fit or operate together.

A) mated section
B) mated assembly
C) phantom assembly
D) phantom section

Answer 3

D

Question 4

A phantom section is a view primarily used to show a(n) ____ part.

A) interior
B) mating
C) inserted
D) slotted

Question 5

Half sections are used primarily to show the interior construction details of ____ parts.

A) similar
B) congruent
C) parallel
D) symmetrical

Question 6

Each section receives its name from the method in which it is obtained or shown.

Question 7

Surfaces of thin materials shown in section are always indicated by section lines.

Question 8

____________________ lines are used to indicate the imaginary cut surface of a half section.

Question 9

A revolved section of a shape is a cross section that has been turned (revolved) ____.

A) 45°
B) 75°
C) 90°
D) 180°

Question 10

The cutting plane line indicates where the section is located with relation to the ____________________ view.

Question 11

Different materials can be represented by various arrangements of section lines.

Question 12

The extent of the cut surface of a cross section is shown by a ____ line located on one of the principal views.

A) cutting
B) plane
C) slice
D) cutting plane

Question 13

The cutting plane line is composed of ____ dashes alternating with a pair of ____ dashes.

A) long, short
B) short, long
C) long, medium
D) medium, short

Question 14

A ____ section is a view of an object which is imagined to be cut entirely in half, with half of the object then removed so that the cut surface can be viewed for its details.

A) partial
B) full
C) print
D) cut out

Question 15

The section lines used in ____ sections are shown running in different directions so that one part can be differentiated from another.

A) drawing
B) planning
C) assembly
D) pairing

Question 16

A ____ line indicates the direction from which the principal view is to be viewed to derive the section.

A) slice
B) cutting
C) cutting plane
D) plane

Question 17

The imagined removed part of a cross section is left out of the other views.

Question 18

When revolved projection is incorporated within a sectional view it is called a(n) ____ section.

A) assembly
B) aligned
C) phantom
D) mated

Question 19

The cut surface of a cross section is represented by ____________________ lines.

Question 20

A(n) ____________________ is a view of an object which is imagined to be cut only halfway through.