Deck 16: Surfacing Welds

Question 1

A surfacing weld is used to ____ a surface.

A) build up
B) smooth out
C) lower
D) diminish

Answer 1

A

Question 2

Special applications of surface welds may be indicated by a note in the tail of the welding symbol, such as adjusting the fitup of grooved joints.

Answer 2

True

Question 3

Because the surface weld symbol does not refer to a joint, it has no arrow side or other side significance.

Answer 3

True

Question 4

Surfacing welds can be applied to a ____ surface.

A) flat
B) contoured
C) wavy
D) flat or contoured

Question 5

When only a portion of the surface must be built up, the extent, location, and orientation of the area to be built up is shown on the print instead of the symbol.

Question 6

The direction of welding may be indicated by a note in the ____ of the welding symbol.

A) head
B) arrow
C) tail
D) line

Question 7

When the entire surface is to be built up, whether it be the entire area of a plane or curved surface, several elements must be added to the surface symbol.

Question 8

Differences in the direction of multiple surface welds may be indicated by the use of appropriate notes in the ____________________ of the welding symbol.

Question 9

When a specific height is not desired, a dimension is not given.

Question 10

The single element shown when the entire surface is to be built up is shown to the ____________________ of the symbol.

Question 11

The single element shown when the entire surface is to be built up is the ____ of the buildup of the weld deposit.

A) minimum thickness
B) maximum thickness
C) minimum density
D) maximum density

Question 12

A reference in the ____________________ of the welding symbol may be included to indicate a buildup in accordance with company standards.

Question 13

In cases where a surfacing weld is to be performed over another weld, a welding symbol with a ____ line may be used.

A) multiple extension
B) multiple reference
C) multiple dimension
D) reference

Question 14

Surfacing welds are shown on the ____ side of the reference line.

A) upper
B) lower
C) inner
D) outer