Deck 17: Edge Welds

Question 1

When the edge weld symbol has a both sides application only, the symbols are placed together on the reference line.

Answer 1

False

Question 2

When specifying the length and spacing of intermittent edge welds, the second dimension represents the ____________________.

Answer 2

pitch

Question 3

Dimensions that may be added to the edge weld symbol are size, length, and spacing (pitch of intermittent welds).

Answer 3

True

Question 4

Applicable length and pitch dimensions are placed on the ____ side of each symbol.

A) top
B) bottom
C) right
D) left

Question 5

The flare V-groove and flare-bevel groove symbols are used in combination with the edge weld symbol to ____________________ the welded joint.

Question 6

When specifying the length and spacing of intermittent edge welds, the first dimension represents the ____ of the weld.

A) length
B) pitch
C) width
D) spacing

Question 7

The edge weld symbol is particularly used for ____ joinery.

A) sheet metal
B) plate metal
C) pipe
D) billet

Question 8

Sheet metal joinery uses welding metal ____ inches or less in thickness.

A) 1/16
B) 3/16
C) 1/8
D) 3/8

Question 9

For staggered intermittent edge welds, the edge weld symbol is shown ____.

A) adjoining
B) offset
C) adjacent
D) parallel

Question 10

____ lines may also be applied to a detail drawing to indicate lengths to be welded.

A) Hashing
B) Crossed
C) Parallel
D) Hatching

Question 11

The ____ weld symbol has replaced the flange butt and corner flange weld symbols, which have become obsolete.

A) side-edge
B) weld-edge
C) edge
D) margin

Question 12

The edge weld symbol may only be used in conjunction with flare-groove and flare-bevel symbols.

Question 13

The edge weld symbol has many of the elements applied to other weld symbols-size, length, pitch, weld-all-around, weld-in-field, finishing and methods of finishing welds.

Question 14

The ____________________ weld symbol has a both sides application only to an edge joint.

Question 15

When the weld is to be specified for a particular length, dimensions within the ____________________ lines are used.

Question 16

The edge weld symbol may be shown having an arrow side, other side, or both sides significance.

Question 17

When specifying the length and spacing of intermittent edge welds, the dimensions are placed to the ____ side of the weld symbol.

A) bottom
B) top
C) right
D) left

Question 18

The flange butt and corner flange weld symbols are identified as ____ to which the edge weld symbol is applied.

A) joins
B) joints
C) edges
D) abutments

Question 19

An edge weld symbol may also be applied to an edge ____________________.

Question 20

To specify a ____ intermittent edge weld, the edge weld symbol is applied to the welding symbol.

A) group
B) batch
C) choppy
D) chain