Deck 2: Power Tools

Question 1

Once a GFI has been installed it does not ever have to be tested.

Answer 1

False
A GFI must be tested with a portable GFI tester frequently to ensure proper protection.

Question 2

A ________________________________ is required by the Occupational Safety and Health Administration (OSHA)for every connection of a tool to a power source.

Answer 2

Ground Fault Circuit Interrupter

Question 3

The most common pistol drill style is a _____" type,which can handle larger diameter drill bit shanks that are used with other drill types;it offers more power for drilling holes than the _____" type.

Answer 3

1/2,3/8

Question 4

A ____________________ drill has its chuck placed at a 90°,or right,angle from the body of the tool.

Question 5

The top of a stepladder can be used for standing.

Question 6

Most right angle drills allow the user to rotate the placement of the chuck _____° to adjust to any workspace.

Question 7

Most drills are provided with a removable ____________________ or ____________________ that can be installed in various designated locations on the tool and must be installed prior to using.

Question 8

Personal ear protection should always be worn when using power tools.

Question 9

An extension ladder must be set up with the top of the ladder at least _____ above the point where the ladder contacts the roof edge.

Question 10

The most common method of fall protection is a ____________________ and a ____________________.

Question 11

Three common drills used by plumbers to drill wood products are the ____________________,the ____________________ and the ____________________.

Question 12

Currently OSHA has no regulation for fall protection.

Question 13

A ____________________ gets its name because of its design,which resembles a handgun.

Question 14

The bottom of the ladder should be approximately _______________ of the length the ladder is extended to ensure a safe angle is established.

Question 15

Electrical power tools are connected directly to a power source and should never be used when wet conditions exist.

Question 16

The maximum operating speed of a grinding wheel must be compatible with the grinder being operated.

Question 17

The ____________________ drill has a fixed drill chuck position tucked further in its body design than other drills for drilling in small spaces.

Question 18

If any power tool is exposed to wet conditions,it should be inspected by proper authorities or service personnel before placing it back in service.

Question 19

Two common sizes of stepladders used in interior residential construction work are _____ and _____.

Question 20

A twist drill bit is designed to drill holes in metal only.

Question 21

____________________ bits are commonly used for drilling through a variety of thin materials and finished surfaces,such as fiberglass shower walls,countertops,or cabinets.

Question 22

If a ladder is extended 20' from the ground to the top of the ladder,the bottom of the ladder should be _______________ feet from the wall or other structural reference point that the top of the ladder touches.

Question 23

The most popular sizes of the power bore bit used by a plumber are _____",_____",_____",and _____".

Question 24

The typical sizes of auger bits used by most residential plumbers are _____" to _____".

Question 25

What is a lifeline and what is its purpose?

Question 26

What is the purpose of a hammer drill?

Question 27

What is the purpose of a saber saw?

Question 28

____________________ bits are the most common drill bit in new residential plumbing installations and are specifically designed for drilling wood products.

Question 29

Describe how a reciprocating saw works.

Question 30

What are the most common types of drill bits and saw blades commonly used in residential plumbing?

Question 31

What is a drill?