Deck 1: Introduction to Engineering and Manufacturing Technology Print Reading

Question 1

Microfilm quality is such that it is suitable for archiving drawings.

Answer 1

TRUE

Question 2

Which of the following sheet sizes is 1189x841mm?

A) A0
B) A1
C) A2
D) A3
E) A4

Answer 2

A

Question 3

A scale establishes a proportion used in determining the dimensional relationship of an actual object to the representation of the same object on a drawing.

Answer 3

TRUE

Question 4

The mechanical engineer's 50 scale is for scaling dimensions that require additional accuracy, because each inch has 50 divisions, making each increment .05 in. (1 ¸ 50 = .05).

Question 5

A scale is an instrument with a system of ordered marks at fixed intervals used as a reference standard in measurement.

Question 6

On ten of the triangular architect's scales, each inch represents a specific increment of feet. Each of the feet is subdivided into multiples of 12 parts to represent inches and fractions of an inch.

Question 7

Which of the following sheet sizes is 297x210mm?

A) A0
B) A1
C) A2
D) A3
E) A4

Question 8

A diazo print is not actually a true blueprint.

Question 9

A sheet with the size designation of "A1" measures 8 1/2" by 11" and is in horizontal format.

Question 10

The mechanical engineer's scale typically has full-scale divisions that are divided into 1/16, 10, and 50.

Question 11

Which of the following sheet sizes is 420x297mm?

A) A0
B) A1
C) A2
D) A3
E) A4

Question 12

Which of the following sheet sizes is 22"x17"?

A) A
B) B
C) C
D) D
E) E

Question 13

The drawing title block usually indicates the scale at which most views are drawn, or the predominant scale of a drawing.

Question 14

Which of the following sheet sizes is 34"x22"?

A) A
B) B
C) C
D) D
E) E

Question 15

If a mechanical drawing shows a scale of 1:4, what does this mean?

A) The drawing was finished on January 4th.
B) The drawing has a four times scale.
C) The drawing has a quarter scale.
D) The drawing has a fourteen scale
E) none of the above

Question 16

The civil engineer's scales are calibrated in multiples of ten.

Question 17

Which of the following sheet sizes is 594x420mm?

A) A0
B) A1
C) A2
D) A3
E) A4

Question 18

What size designation is an 11"x17" sheet?

A) A
B) B
C) C
D) D
E) E

Question 19

A scale establishes a proportion used in determining the dimensional relationship of an actual object to the representation of the same object on a drawing.

Question 20

Zoning is a system of numbers and letters along the margins to aid in reading drawings.

Question 21

The _________________________ is a five number code assigned by the Defense Logistic Service Center to all Department of Defense Contractors.

Question 22

Drafting revisions are completed in:

A) alphabetical order
B) order of importance
C) groups that are similar
D) chronological order
E) none of the above

Question 23

Identify the ASME standard titled Metric Drawing Sheet Size and Format.

Question 24

A scale that reads 1:2 is a(n):

A) architect's scale
B) metric scale
C) civil engineer's scale
D) full scale
E) half scale

Question 25

MATCHING
Match the abbreviation with its correct meaning
a.cm
b.hm
c.darn
d.km
e.dm
f.mm
g.m
Decimeter

Question 26

MATCHING
Match the abbreviation with its correct meaning
a.cm
b.hm
c.darn
d.km
e.dm
f.mm
g.m
Millimeter

Question 27

According to the ASME, the ____________________ is the most commonly used linear unit of measure for engineering drawings outside the United States.

Question 28

The following scales and their notations are common to mechanical drawings:

A) FULL or 1:1
B) HALF or 1:2
C) QUARTER or 1:4
D) DOUBLE or 2:1
E) all of the above

Question 29

Proper folding of a drawing is done so that the _________________________ and ______________________________ end up on the front of the folded drawing.

Question 30

What is the five number code assigned by the Defense Logistic Service to all Department of Defense contractors called?

A) BAR Code
B) CELL Code
C) DLSC Code
D) CAGE Code

Question 31

MATCHING
Match the abbreviation with its correct meaning
a.cm
b.hm
c.darn
d.km
e.dm
f.mm
g.m
Dekameter

Question 32

A scale that shows that 1"=60' is a(n)

A) architect's scale
B) metric scale
C) civil engineer's scale
D) full scale
E) half scale

Question 33

Match the acronym with its correct meaning.
a.FSCM
b.DNC
c.CAM
d.ASME
e.CNC
f.SI
g.CAGE
h.ANSI
Commercial and Government Entity

Question 34

Identify the ASME standard titled Decimal Inch Drawing Sheet Size and Format.

A) ASME Y14.1
B) ASME Y14.1M
C) ASME Y14.5
D) ASME Y14.14
E) none of the above

Question 35

Identify the ASME standard titled Metric Drawing Sheet Size and Format

A) ASME Y14.1
B) ASME Y14.1M
C) ASME Y14.5
D) ASME Y14.14
E) none of the above

Question 36

MATCHING
Match the abbreviation with its correct meaning
a.cm
b.hm
c.darn
d.km
e.dm
f.mm
g.m
Centimeter

Question 37

MATCHING
Match the abbreviation with its correct meaning
a.cm
b.hm
c.darn
d.km
e.dm
f.mm
g.m
Kilometer

Question 38

The ____________________ is the most commonly used linear unit of measure for engineering drawings in the United States.

Question 39

MATCHING
Match the abbreviation with its correct meaning
a.cm
b.hm
c.darn
d.km
e.dm
f.mm
g.m
Hectometer

Question 40

MATCHING
Match the abbreviation with its correct meaning
a.cm
b.hm
c.darn
d.km
e.dm
f.mm
g.m
Meter

Question 41

What sheet sizes does the ASME standard recommend for zoning and what sheet sizes do not require zoning?

Question 42

List the four classes of size tolerances identified by the International Organization for Standardization (ISO) standard ISO 2768, General Tolerances that generally controls unspecified tolerances for metric dimensions.

Question 43

Give an example of the sheet numbering system used when multiple sheets are required to display a single drawing, the sheet block organizes the multiple sheet drawing.

Question 44

Describe and give the basic function and identify the location for a title block.

Question 45

Match the acronym with its correct meaning.
a.FSCM
b.DNC
c.CAM
d.ASME
e.CNC
f.SI
g.CAGE
h.ANSI
Direct numeric control

Question 46

Name the five number code assigned by the United States Defense Logistic Service Center (DLSC) to all Department of Defense contractors.

Question 47

Define border.

Question 48

Define zoning.

Question 49

Describe and give an example of how zoning allows the drawing to read like a road map.

Question 50

Describe the function of the angle of projection block.

Question 51

Describe and give the function of the dimensioning and tolerancing block.

Question 52

Define and give an example of zoning.

Question 53

Match the acronym with its correct meaning.
a.FSCM
b.DNC
c.CAM
d.ASME
e.CNC
f.SI
g.CAGE
h.ANSI
International System of Units

Question 54

Describe the purpose of the dimensioning and tolerancing block.

Question 55

Match the acronym with its correct meaning.
a.FSCM
b.DNC
c.CAM
d.ASME
e.CNC
f.SI
g.CAGE
h.ANSI
Computer-aided manufacturing

Question 56

Match the acronym with its correct meaning.
a.FSCM
b.DNC
c.CAM
d.ASME
e.CNC
f.SI
g.CAGE
h.ANSI
Federal Supply Code for Manufactures

Question 57

Match the acronym with its correct meaning.
a.FSCM
b.DNC
c.CAM
d.ASME
e.CNC
f.SI
g.CAGE
h.ANSI
American Society of Mechanical Engineers

Question 58

Match the acronym with its correct meaning.
a.FSCM
b.DNC
c.CAM
d.ASME
e.CNC
f.SI
g.CAGE
h.ANSI
American National Standards Institute

Question 59

Match the acronym with its correct meaning.
a.FSCM
b.DNC
c.CAM
d.ASME
e.CNC
f.SI
g.CAGE
h.ANSI
Computer numerical control

Question 60

Describe the purpose of the angle of projection block and name the two projection formats.

Question 61

Describe and give another name for the Revision History block, and specify the preferred ASME location on the drawing.

Question 62

Give another name for the revision history block and identify its typical location on a print, and indicate how the revision history block is displayed when the content exceeds the available space.

Question 63

How is size tolerances identified by the International Organization for Standardization (ISO) standard ISO 2768, General Tolerances specified on a drawing?