Deck 11: Cost Allocation and Activity-Based Costing

Question 1

Zorn Co. budgeted $600,000 of factory overhead cost for the coming year. Its plantwide allocation base, machine hours, is budgeted at 100,000 hours. Budgeted units to be produced are 200,000 units. Zorn's plantwide factory overhead rate is $6.00 per unit.

Answer 1

False

Question 2

If the budgeted factory overhead cost is $460,000, the budgeted direct labor hours is 80,000, and the actual direct labor hours is 6,700 for the month, the factory overhead rate for the month is $68.65 (if the allocation is based on direct labor hours).

Answer 2

False

Question 3

Managers depend on accurate factory overhead allocation to make decisions regarding product mix and product price.

Answer 3

True

Question 4

A plantwide factory overhead rate is computed by dividing total budgeted factory overhead costs by the plantwide allocation base.

Question 5

Zorn Co. budgeted $300,000 of factory overhead cost for the coming year. Its plantwide allocation base, machine hours, is budgeted at 50,000 hours. Budgeted units to be produced are 100,000 units. Zorn's plantwide factory overhead rate is $6.00 per machine hour.

Question 6

If the activities causing overhead costs are different across different departments and products, use of a plantwide factory overhead rate will cause distorted product costs.

Question 7

Use of a plantwide factory overhead rate assumes that the activities causing overhead costs are the same across all departments and products.

Question 8

A single plantwide overhead rate method is very expensive to apply.

Question 9

If the budgeted factory overhead cost is $460,000, the budgeted direct labor hours is 80,000, and the actual direct labor hours is 6,700 for the month, the amount of factory overhead to be allocated is $38,525 (if the allocation is based on direct labor hours).

Question 10

Multiple production department factory overhead rates are more accurate and more costly than are plantwide factory overhead rates.

Question 11

When a plantwide factory overhead rate is used, overhead costs are applied to all products by a single rate.

Question 12

The selection of the factory overhead allocation method is important because the method selected determines the accuracy of the product cost.

Question 13

Use of a plantwide factory overhead rate assumes that the activities causing overhead costs are different across different departments and products.

Question 14

When a plantwide factory overhead rate is used, the total overhead costs allocated to all products is the same.

Question 15

Multiple production department factory overhead rates are less accurate and less costly than are plantwide factory overhead rates.

Question 16

Multiple production department factory overhead rates are most useful when production departments are very similar in their manufacturing processes.

Question 17

Multiple production department factory overhead rates are most useful when production departments differ in their manufacturing processes.

Question 18

Managers depend on product costing to make decisions regarding continuing operations, advertising, and product mix.

Question 19

A plantwide factory overhead rate assumes that all overhead is directly related to one activity representing the entire plant.

Question 20

Product costing consists of only direct materials and direct labor.

Question 21

Service companies can effectively use multiple department overhead rate costing to compute product (service) costs.

Question 22

Use of a plantwide factory overhead rate distorts product costs when there are differences in the factory overhead rates across different production departments and when products require different ratios of allocation-base usage in each production department.

Question 23

Use of a plantwide factory overhead rate does not distort product costs when there are differences in the factory overhead rates across different production departments.

Question 24

Activity cost pools are cost accumulations associated with a given activity.

Question 25

Which of the following is not a factory overhead allocation method?

A) single plantwide rate
B) multiple departmental rates
C) factory costing
D) activity-based costing

Question 26

Service organizations can use activity-based costing to allocate selling and administrative costs to services provided.

Question 27

Activity-based costing is much easier to apply than single plantwide factory overhead allocation.

Question 28

Service companies can effectively use single facility-wide overhead costing to compute product (service) costs.

Question 29

Activity-based costing can only be used to allocate manufacturing factory overhead.

Question 30

When production departments differ significantly in their manufacturing process, it is recommended that the single plantwide factory overhead rate be used for allocating factory overhead.

Question 31

ABC is used to allocate selling and administrative expenses to each product based on the product's individual differences in consuming these activities.

Question 32

In a service organization, the multiple department overhead rate method is the most effective in providing information about the cost of services.

Question 33

Activity-based costing can be used to allocate period costs to various products that the company sells.

Question 34

Activity cost pools are assigned to products, using factory overhead rates for each activity.

Question 35

Use of a plantwide factory overhead rate does not distort product costs only when products require different ratios of allocation-base usage in each production department.

Question 36

Activity rates are computed by dividing the cost budgeted for each activity pool by the estimated activity base for that pool.

Question 37

Estimated activity-base usage quantities are the total activity-base quantities related to each product.

Question 38

Direct labor hours is not a cost pool that is regularly used in the activity-based costing method.

Question 39

Service companies can effectively use activity-based costing to compute product (service) costs.

Question 40

In an effort to simplify the multiple production department factory overhead rate method, the same rate can be used for all departments.

Question 41

Blackwelder Factory produces two similar products - small lamps and desk lamps. The total plant overhead budget is $640,000 with 400,000 estimated direct labor hours. It is further estimated that small lamp production will require 275,000 direct labor hours and desk lamp production will need 125,000 direct labor hours. Using the single plantwide factory overhead rate with an allocation base of direct labor hours, how much factory overhead will be allocated to the small lamp production if the actual direct hours for the period is 285,000?

A) $275,000
B) $285,000
C) $440,000
D) $456,000

Question 42

Adirondak Marketing Inc. manufactures two products, A and B. Presently, the company uses a single plantwide factory overhead rate for allocating overhead to products. However, management is considering moving to a multiple department rate system for allocating overhead. Calculate the overhead rate per unit for Product A in painting department:

A) $236.32 per unit
B) $325.00 per unit
C) $147.70 per unit
D) $161.00 per unit

Question 43

Challenger Factory produces two similar products - regular widgets and deluxe widgets. The total plant overhead budget is $675,000 with 300,000 estimated direct labor hours. It is further estimated that deluxe widget production will need 3 direct labor hours for each unit and regular widget production will require 2 direct labor hours for each unit. Using the single plantwide factory overhead rate with an allocation base of direct labor hours, how much factory overhead will be allocated to the deluxe widget production if the budgeted production for the period is 50,000 units and actual production for the period is 58,000 units?

A) $391,500
B) $225,000
C) $261,000
D) $337,500

Question 44

Blue Ridge Marketing Inc. manufactures two products, A and B. Presently, the company uses a single plantwide factory overhead rate for allocating overhead to products. However, management is considering moving to a multiple department rate system for allocating overhead. The following table presents information about estimated overhead and direct labor hours. Determine the overhead rate in the Painting Department for each unit of Product B if the company uses a multiple department rate system.

A) $12.40 per dlh
B) $24.80 per dlh
C) $7.20 per dlh
D) $16.00 per dlh

Question 45

Challenger Factory produces two similar products - regular widgets and deluxe widgets. The total plant overhead budget is $675,000 with 300,000 estimated direct labor hours. It is further estimated that deluxe widget production will need 3 direct labor hours for each unit and regular widget production will require 2 direct labor hours for each unit. Using the single plantwide factory overhead rate with an allocation base of direct labor hours, how much factory overhead will be allocated to the regular widget production if budgeted production for the period is 75,000 units and actual production for the period is 72,000 units?

A) $168,750
B) $324,000
C) $162,000
D) $337,500

Question 46

Everest Co. uses a plantwide factory overhead rate based on direct labor hours. Overhead costs would be overcharged to which of the following departments?

A) A labor-intensive department
B) A capital-intensive department
C) A materials-intensive department
D) All of the above

Question 47

Common allocation bases are

A) direct labor dollars, direct labor hours, direct material dollars
B) direct labor dollars, direct labor hours, machine hours
C) direct labor dollars, direct labor hours, machine dollars
D) machine dollars, direct labor dollars, machine hours

Question 48

Blue Ridge Marketing Inc. manufactures two products, A and B. Presently, the company uses a single plantwide factory overhead rate for allocating overhead to products. However, management is considering moving to a multiple department rate system for allocating overhead. The following table presents information about estimated overhead and direct labor hours. Using a single plantwide rate, determine the overhead rate per unit for Product B:

A) $496.00
B) $144.00
C) $640.00
D) $320.00

Question 49

Blue Ridge Marketing Inc. manufactures two products, A and B. Presently, the company uses a single plantwide factory overhead rate for allocating overhead to products. However, management is considering moving to a multiple department rate system for allocating overhead. The following table presents information about estimated overhead and direct labor hours. Determine the overhead rate in the Finishing Department for each unit of Product A if the company uses a multiple department rate system.

A) $24.80 per dlh
B) $12.40 per dlh
C) $16.00 per dlh
D) $7.20 per dlh

Question 50

The Ramapo Company produces two products, Blinks and Dinks. They are manufactured in two departments, Fabrication and Assembly. Data for the products and departments are listed below. All of the machine hours take place in the Fabrication department, which has an estimated overhead of $84,000. All of the labor hours take place in the Assembly department, which has an estimated total overhead of $72,000.
The Ramapo Company uses a single overhead rate to apply all overhead costs. What would the single plantwide rate be if it was based on machine hours instead of labor hours?

A) $9.00 per MH
B) $19.50 per MH
C) $7.43 per MH
D) $4.00 per MH

Question 51

Adirondak Marketing Inc. manufactures two products, A and B. Presently, the company uses a single plantwide factory overhead rate for allocating overhead to products. However, management is considering moving to a multiple department rate system for allocating overhead. Calculate the plantwide factory overhead rate:

A) $25.00 per dlh
B) $0.07 per dlh
C) $14.77 per dlh
D) $ 6.25 per dlh

Question 52

Which of the following does not support managerial decisions involving accurate product costing?

A) product constraints
B) emphasis of a product line
C) product mix
D) product price

Question 53

The Ramapo Company produces two products, Blinks and Dinks. They are manufactured in two departments, Fabrication and Assembly. Data for the products and departments are listed below. All of the machine hours take place in the Fabrication department, which has an estimated overhead of $84,000. All of the labor hours take place in the Assembly department, which has an estimated total overhead of $72,000.
The Ramapo Company uses a single overhead rate to apply all overhead costs based on labor hours. What is the overhead cost per unit for Blinks?

A) $78.00
B) $19.50
C) $37.45
D) $56.00

Question 54

Blue Ridge Marketing Inc. manufactures two products, A and B. Presently, the company uses a single plantwide factory overhead rate for allocating overhead to products. However, management is considering moving to a multiple department rate system for allocating overhead. The following table presents information about estimated overhead and direct labor hours. Determine the overhead from both production departments allocated to each unit of Product B if the company uses a multiple department rate system.

A) $425.60 per unit
B) $115.20 per unit
C) $214.40 per unit
D) $320.00 per unit

Question 55

The Ramapo Company produces two products, Blinks and Dinks. They are manufactured in two departments, Fabrication and Assembly. Data for the products and departments are listed below. All of the machine hours take place in the Fabrication department, which has an estimated overhead of $84,000. All of the labor hours take place in the Assembly department, which has an estimated total overhead of $72,000.
The Ramapo Company uses a single overhead rate to apply all overhead costs based on labor hours. What is the overhead cost per unit for Dinks?

A) $77.00
B) $39.00
C) $19.50
D) $59.92

Question 56

Pinacle Corp. budgeted $350,000 of overhead cost for 2012. Actual overhead costs for the year were $325,000. Pinacle's plantwide allocation base, machine hours, was budgeted at 50,000 hours. Actual machine hours were 40,000. A total of 100,000 units was budgeted to be produced and 98,000 units were actually produced. Pinacle's plantwide factory overhead rate for 2012 is:

A) $8.13 per machine hour
B) $7.00 per machine hour
C) $6.50 per machine hour
D) $8.75 per machine hour

Question 57

Blackwelder Factory produces two similar products - small lamps and desk lamps. The total plant overhead budget is $640,000 with 400,000 estimated direct labor hours. It is further estimated that small lamp production will require 275,000 direct labor hours and desk lamp production will need 125,000 direct labor hours. Using the single plantwide factory overhead rate with an allocation base of direct labor hours, how much factory overhead will be allocated to the desk lamp production if the actual direct hours for the period is 118,000?

A) $118,000
B) $200,000
C) $188,800
D) $125,000

Question 58

Blue Ridge Marketing Inc. manufactures two products, A and B. Presently, the company uses a single plantwide factory overhead rate for allocating overhead to products. However, management is considering moving to a multiple department rate system for allocating overhead. The following table presents information about estimated overhead and direct labor hours. Determine the overhead from both production departments allocated to each unit of Product A if the company uses a multiple department rate system.

A) $396.80 per unit
B) $425.60 per unit
C) $320.00 per unit
D) $214.40 per unit

Question 59

The Cunningham Factory has determined that its budgeted factory overhead budget for the year is $6,750,000 and budgeted direct labor hours are 5,000,000. If the actual direct labors for the period are 175,000 how much overhead would be allocated to the period?

A) $675,000
B) $129,630
C) $236,250
D) $175,000

Question 60

The Baffin Factory has determined that its budgeted factory overhead budget for the year is $7,750,000. They plan to produce 1,000,000 units. Budgeted direct labor hours are 525,000 and budgeted machine hours are 375,000. Using the single plantwide factory overhead rate based on direct labor hours, calculate the factory overhead rate for the year.

A) $14.76
B) $20.67
C) $7.75
D) $77.50

Question 61

Panamint Systems Corporation is estimating activity costs associated with producing disk drives, tapes drives, and wire drives. The indirect labor can be traced to four separate activity pools. The budgeted activity cost and activity base data by product are provided below. Determine the activity rate for procurement per purchase order.

A) $43.53
B) $18.50
C) $15.42
D) $37.00

Question 62

The Aleutian Company produces two products, Rings and Dings. They are manufactured in two departments-fabrication and assembly. Data for the products and departments are listed below. All of the machine hours take place in the Fabrication department, which has an estimated overhead of $90,000. All of the labor hours take place in the Assembly department, which has an estimated total overhead of $105,000.
The Aleutian Company uses a departmental overhead rates. The fabrication department uses machine hours for an allocation base, and the assembly department uses labor hours.
What is the overhead cost per unit for Dings?

A) $65.25
B) $56.75
C) $23.25
D) $64.50

Question 63

The Aleutian Company produces two products, Rings and Dings. They are manufactured in two departments-fabrication and assembly. Data for the products and departments are listed below. All of the machine hours take place in the Fabrication department, which has an estimated overhead of $90,000. All of the labor hours take place in the Assembly department, which has an estimated total overhead of $105,000.
The Aleutian Company uses a departmental overhead rates. The fabrication department uses machine hours for an allocation base, and the assembly department uses labor hours.
What is the fabrication department overhead rate per machine hour?

A) $10.50
B) $9.00
C) $8.12
D) $3.75

Question 64

Panamint Systems Corporation is estimating activity costs associated with producing disk drives, tapes drives, and wire drives. The indirect labor can be traced to four separate activity pools. The budgeted activity cost and activity base data by product are provided below. Determine the activity rate for product development per change.

A) $73,000
B) $8,588
C) $30,417
D) $16,222

Question 65

The Kaumajet Factory produces two products - table lamps and desk lamps. It has two separate departments - finishing and production. The overhead budget for the finishing department is $550,000, using 500,000 direct labor hours. The overhead budget for the production department is $400,000 using 80,000 direct labor hours. If the budget estimates that a desk lamp will require 1 hours of finishing and 2 hours of production, how much factory overhead will be allocated to each unit of desk lamps using the multiple production department factory overhead rate method with an allocation base of direct labor hours?

A) $11.10
B) $4.91
C) $5.00
D) $7.20

Question 66

The Aleutian Company produces two products, Rings and Dings. They are manufactured in two departments-fabrication and assembly. Data for the products and departments are listed below. All of the machine hours take place in the Fabrication department, which has an estimated overhead of $90,000. All of the labor hours take place in the Assembly department, which has an estimated total overhead of $105,000.
The Aleutian Company uses a departmental overhead rates. The fabrication department uses machine hours for an allocation base, and the assembly department uses labor hours.
What is the assembly department overhead rate per labor hour?

A) $10.50
B) $19.50
C) $3.75
D) $4.38

Question 67

Panamint Systems Corporation is estimating activity costs associated with producing disk drives, tapes drives, and wire drives. The indirect labor can be traced to four separate activity pools. The budgeted activity cost and activity base data by product are provided below. Determine the activity-based cost for each wire drive unit.

A) $204.13
B) $173.51
C) $744.06
D) $394.12

Question 68

The Kaumajet Factory produces two products - table lamps and desk lamps. It has two separate departments - finishing and production. The overhead budget for the finishing department is $550,000, using 500,000 direct labor hours. The overhead budget for the production department is $400,000 using 80,000 direct labor hours. If the budget estimates that a table lamp will require 2 hours of finishing and 1 hours of production, how much factory overhead will be allocated to each unit of table lamp using the multiple production department factory overhead rate method with an allocation base of direct labor hours?

A) $6.33
B) $4.91
C) $5.00
D) $7.20

Question 69

Which of the following are the two most common allocation bases for factory overhead?

A) Total overhead dollars and machine hours
B) Direct labor hours and machine hours
C) Direct labor hours and factory expenses
D) Machine hours and factory expenses

Question 70

Panamint Systems Corporation is estimating activity costs associated with producing disk drives, tapes drives, and wire drives. The indirect labor can be traced to four separate activity pools. The budgeted activity cost and activity base data by product are provided below. Determine the activity rate for materials handling per move.

A) $58.82
B) $50.00
C) $20.83
D) $80.65

Question 71

The Kaumajet Factory produces two products - table lamps and desk lamps. It has two separate departments - finishing and production. The overhead budget for the finishing department is $550,000, using 500,000 direct labor hours. The overhead budget for the production department is $400,000 using 80,000 direct labor hours. If the budget estimates that a table lamp will require 2 hours of finishing and 1 hours of production, what is the total amount of factory overhead to be allocated to table lamps using the multiple production department factory overhead rate method with an allocation base of direct labor hours, if 75,000 units are produced?

A) $368,250
B) $540,000
C) $832,500
D) $475,000

Question 72

All of the following can be used as an allocation base for calculating factory overhead rates except:

A) direct labor dollars
B) direct labor hours
C) machine hours
D) total overhead costs

Question 73

Using multiple department factory overhead rates instead of a single plantwide factory overhead rate:

A) results in more accurate product costs
B) results in distorted product costs
C) is simpler and less expensive than a plantwide rate
D) applies overhead costs to all departments equally

Question 74

The Kaumajet Factory produces two products - table lamps and desk lamps. It has two separate departments - finishing and production. The overhead budget for the finishing department is $550,000, using 500,000 direct labor hours. The overhead budget for the production department is $400,000 using 80,000 direct labor hours. If the budget estimates that a desk lamp will require 1 hours of finishing and 2 hours of production, what is the total amount of factory overhead to be allocated to desk lamps using the multiple production department factory overhead rate method with an allocation base of direct labor hours, if 26,000 units are produced?

A) $540,000
B) $187,200
C) $475,000
D) $288,600

Question 75

Using a plantwide factory overhead rate distorts product costs when:

A) products require different ratios of allocation-base usage in each production department
B) significant differences exist in the factory overhead rates used across different production departments
C) both A and B are true
D) neither A nor B are true

Question 76

Panamint Systems Corporation is estimating activity costs associated with producing disk drives, tapes drives, and wire drives. The indirect labor can be traced to four separate activity pools. The budgeted activity cost and activity base data by product are provided below. Determine the activity rate for production per machine hour.

A) $62.50
B) $150.00
C) $75.00
D) $176.47

Question 77

Scoresby Co. uses 3 machine hours and 1 direct labor hour to produce Product X. It uses 4 machine hours and 8 direct labor hours to produce Product Y. Scoresby's Assembly and Finishing Departments have factory overhead rates of $240 per machine hour and $160 per direct labor hour, respectively. How much overhead cost will be charged to the two products?

A) Product X = $1,600; Product Y = $4,800
B) Product X = $400; Product Y = $400
C) Product X = $880; Product Y = $2,240
D) Product X = $720; Product Y = $1,280

Question 78

The Aleutian Company produces two products, Rings and Dings. They are manufactured in two departments-fabrication and assembly. Data for the products and departments are listed below. All of the machine hours take place in the Fabrication department, which has an estimated overhead of $90,000. All of the labor hours take place in the Assembly department, which has an estimated total overhead of $105,000.
The Aleutian Company uses a departmental overhead rates. The fabrication department uses machine hours for an allocation base, and the assembly department uses labor hours.
What is the overhead cost per unit for Rings?

A) $65.25
B) $23.25
C) $44.10
D) $64.50

Question 79

Panamint Systems Corporation is estimating activity costs associated with producing disk drives, tapes drives, and wire drives. The indirect labor can be traced to four separate activity pools. The budgeted activity cost and activity base data by product are provided below. Determine the activity rate per production order for scheduling.

A) $200.00
B) $20.00
C) $29.41
D) $10.42

Question 80

Panamint Systems Corporation is estimating activity costs associated with producing disk drives, tapes drives, and wire drives. The indirect labor can be traced to four separate activity pools. The budgeted activity cost and activity base data by product are provided below. Determine the activity-based cost for each disk drive unit.

A) $92.25
B) $130.69
C) $394.12
D) $279.57