Deck 18: Interior Finish

Question 1

A suspended ceiling system consists of panels that are laid into a metal grid.

Answer 1

True

Question 2

____ ceilings provide space for recessed lighting, ducts, pipes, and other necessary conduits.

A)Concave
B)Suspended
C)Coffered
D)Beam

Answer 2

B

Question 3

Designated by location, base, base shoe, and ____ are moldings applied at the bottom of walls where they meet the floor.

A)beds
B)coves
C)crowns
D)base cap

Answer 3

D

Question 4

Head casing length is a little more than the door width plus two casing widths.

Question 5

The angled cut starting from the end going back into the face of the molding is called a back miter.

Question 6

Door ____ are moldings applied around the door opening.

A)casings
B)jambs
C)sills
D)sashes

Question 7

On the same window, aprons should have the same molded shape as casings.

Question 8

Bed and crown moldings are designed to be installed on the top edge of wainscoting.

Question 9

Molding usually comes in lengths of 8, 10, 12, 14, and ____ feet.

A)16
B)20
C)24
D)30

Question 10

S4S is the abbreviation for "____ four sides."

A)squared
B)surfaced
C)sequenced
D)sized

Question 11

Coped joints are performed on outside miters.

Question 12

A scaled sketch of a suspended ceiling grid should indicate the direction and location of the main runners, cross tees, light panels, and ____.

A)ceiling insulation
B)wall boards
C)border panels
D)floor plan

Question 13

For each interior door opening, ____ side casings and two head casings are required.

A)two
B)four
C)six
D)eight

Question 14

____ are L-shaped pieces that are fastened to the wall to support the other components of the ceiling system.

A)Wall angles
B)Main runners
C)Hanger wires
D)Cross tees

Question 15

A nail set should be used to set hardened flooring nails.

Question 16

Prefinished strip flooring should be sanded after installation.

Question 17

A ____ box is a tool that cuts material at an angle.

A)cope
B)corner
C)miter
D)joint

Question 18

____ are applied to door frames for the doors to stop against when closed.

A)Aprons
B)Stops
C)Stools
D)Back bands

Question 19

The first piece of window trim installed is usually the apron.

Question 20

Muntins are window grills and are often removable.

Question 21

A piece of 1 * 4 or 1 * 6 stock called a ____ is installed around the walls of a closet to support the shelf and the rod.

A)frame
B)back band
C)brace
D)cleat

Question 22

____ are used to decorate fireplaces and to cover the joint between the fireplace and the wall.

A)Mantels
B)Moldings
C)Casings
D)Sills

Question 23

____ grades of pecan flooring contain all heartwood.

A)Clear
B)Red
C)Select
D)Common

Question 24

One head of the heavy hammer used with a power nailer is ____ and the other is steel.

A)rubber
B)plastic
C)wood
D)aluminum

Question 25

If a floor that is 384 square feet is to be covered with standard 2 1/4-inch flooring, ____ board feet of flooring will be required.

A)147
B)383
C)384
D)531

Question 26

A ____ is a bevel on the edge of a board that extends only partway through the thickness of the stock.

A)wedge
B)notch
C)chamfer
D)cleft

Question 27

____ flooring is installed like strip flooring.

A)Laminate
B)Plank
C)Raised
D)Linoleum

Question 28

You can change directions of strip flooring by joining groove edge to groove edge and inserting a ____.

A)sleeper
B)rack
C)block
D)spline

Question 29

Oak flooring is available ____-sawed and plain-sawed.

A)crown
B)rift
C)cabin
D)quarter

Question 30

Flooring is blind nailed by driving nails at about a ____-degree angle through the flooring.

A)15
B)30
C)45
D)60