Deck 8: Technical Drawing

Question 1

____________________ are explanatory notes on drawings that provide important information to the person reading the drawing.

Answer 1

Annotations

Question 2

Team members can indicate changes by including a dated revision note on the drawing and by issuing an ____ notice (ECN).

A) encompassed change
B) equal change
C) engineering change
D) engineering charter

Answer 2

C

Question 3

A(n)____________________ view provides a view of an object as though it were cut by a saw.

Answer 3

sectional

Question 4

____ lines are used to indicate an object's size,as well as the sizes and the locations of its features.

A) Convention
B) Dimension
C) Cutting plane
D) Scale

Question 5

Sketches are turned into 3D models by ____,a term often used to describe a number of functions,such as extrusion,lofting,revolving,sweeping,and shelling.

A) conventions
B) standards
C) features
D) dimensions

Question 6

Oblique pictorials that are drawn at a ____-degree angle may be sketched using isometric grid paper.

A) 30
B) 45
C) 60
D) 90

Question 7

Prior to the development of the computer,drawings were made on vellum using pencil and ink in a process known as ____.

A) dimensioning
B) CAD
C) exploded assembly
D) drafting

Question 8

In architecture building design,most units are in ____,so a scale of that unit is required to represent the building on paper.

A) feet
B) meters
C) fathoms
D) ratios

Question 9

The general term used to describe the different projected views is known as ____ projection.

A) drawing
B) assembly
C) axonometric
D) perspective

Question 10

____________________ surface modeling is a technique that allows the designer to create a "skin" over a component,creating curves in almost any shape desired.

Question 11

A ____ is often used on outside intersecting planes by removing material at an angle to one of the planes.

A) round
B) parameter
C) chamfer
D) dimension

Question 12

There is no difference between a drawing and a projection.

Question 13

ISO standards are based on the ____________________ system.

Question 14

A(n)____________________ projection drawing has one face parallel to the viewing plane.

Question 15

A(n)____ refers to the way in which something is usually done.

A) convention
B) standard
C) assembly
D) dimension

Question 16

Today,many companies develop technical drawings automatically from 3D CAD models.

Question 17

Though CAD solid modeling programs automatically generate technical drawing views,accurately communicating dimensions and tolerances is still a manual process conducted by a designer.

Question 18

The arrows on a cutting plane line indicate what part of the object is to be retained.

Question 19

Solid modeling is a method that involves mathematically describing solely the interior of an object.

Question 20

Multi-view drawings are often called ____-view drawings.

A) two
B) three
C) four
D) five

Question 21

What is the difference between dimensions that read 5.0 inches,5.00 inches,and 5.000 inches?

Question 22

How is an isometric drawing created?

Question 23

Describe how math is used in technical drawings.

Question 24

What is the difference between cavalier and cabinet projections?

Question 25

What is datum dimensioning?