Question 1

Slack is the difference between the time remaining until a job's due date and the total shop time remaining,excluding that of the operation being scheduled.

Accepted Answer

False

Question 2

The fact that job shops routinely accept new orders at any time makes the scheduling environment dynamic.

Accepted Answer

Job shops are known for their ability to handle custom and low-volume production runs, which means they do not have fixed schedules. Instead, job shops typically accept new orders whenever customers need them, which creates a dynamic scheduling environment. This fact can make scheduling more challenging because it requires managers to balance multiple priorities and constantly adjust schedules based on changing demands.

Question 3

Which of the following statements on an operations schedule is best?&#10;A)It determines when employees work.&#10;B)It assigns employees to tasks depending on availability.&#10;C)It assigns customers to a definite time for order fulfillment.&#10;D)It assigns jobs to workstations or employees to jobs for specified time periods.

Accepted Answer

Option D is the best choice as an operations schedule assigns jobs to workstations or employees for specified time periods. This allows for efficient use of resources and helps to ensure that work is completed on time. Option A is too narrow in scope, as an operations schedule can involve more than just determining when employees work. Option B may be a component of an operations schedule, but it is not the primary purpose. Similarly, while option C may be relevant for service-based businesses, it does not apply to all operations schedules.

Question 4

The earliest due date (EDD)rule gives the job with the shortest processing time the highest priority.

Accepted Answer

The earliest due date (EDD) rule gives the job with the earliest due date the highest priority, not necessarily the one with the shortest processing time.

Question 5

A manufacturer's flow shop utilizes line or continuous flow processes.

Accepted Answer

A flow shop is characterized by the use of line or continuous flow processes, where products move continuously through a predetermined sequence of operations. This is in contrast to a job shop, where products are produced in small batches according to customer specifications.

Question 6

Total inventory is equal to:&#10;A)scheduled receipts plus on-hand inventories.&#10;B)received orders minus scheduled receipts.&#10;C)on-hand inventories plus received orders.&#10;D)None of these is equal to total inventory.

Accepted Answer

The answer of Total inventory is equal to:&#10;A)scheduled receipts plus...

Question 7

Makespan is the total amount of time to complete a single job or the first job in a group of jobs.

Accepted Answer

Makespan refers to the total amount of time required to complete a set or batch of jobs, from the start of the first job to the completion of the last job, not just a single job or the first job.

Question 8

An appropriate objective for a manufacturing firm is to maximize total inventory.

Accepted Answer

Maximize total inventory is not an appropriate objective for a manufacturing firm as it can lead to excessive stockpiling and inefficiencies. The objective should be to optimize inventory levels to meet demand while minimizing holding and ordering costs.

Question 9

A first-come,first-served schedule minimizes the average flow time for all jobs.

Accepted Answer

First-come, first-served (FCFS) scheduling does not necessarily minimize the average flow time for all jobs, as it does not account for the length of the jobs. Shorter jobs might wait behind longer ones, leading to increased average flow time compared to other scheduling algorithms like Shortest Job First (SJF), which can minimize the average flow time more effectively.

Question 10

A job's flow time at a single workstation is defined as the:&#10;A)completion time of the job plus the time since it arrived at the workstation.&#10;B)processing time to complete the job.&#10;C)time of completion of the last job of a group minus the starting time of the first job.&#10;D)amount of time by which a group of jobs missed their due dates.

Accepted Answer

Flow time at a single workstation is the time taken by a job to complete at the workstation, which includes the time since it arrived at the workstation until it is completed. Hence, option A is the correct answer. Option B is incorrect because it only considers the processing time and not the time the job spends waiting at the workstation. Option C is incorrect because it refers to the time span between the first and last job within a group, which may not be relevant in this case. Option D is incorrect because it implies that the jobs have missed their due dates, which may not necessarily be the case.

Question 11

Operations scheduling involves assigning jobs to workstations or employees to jobs for specific time periods.

Accepted Answer

The answer of Operations scheduling involves assigning jobs to workstations...

Question 12

Sequencing jobs does not affect tardiness,because processing times are unchanged with different sequences.

Accepted Answer

The answer of Sequencing jobs does not affect tardiness,because processing...

Question 13

Critical ratio (CR)is a single-dimension priority rule.

Accepted Answer

The answer of Critical ratio (CR)is a single-dimension priority rule....

Question 14

Operations scheduling applies only to manufacturing,because services do not allow inventories.

Accepted Answer

The answer of Operations scheduling applies only to manufacturing,because services...

Question 15

Total inventory is the sum of the scheduled receipts for all items and the on-hand inventories for all items.

Accepted Answer

The answer of Total inventory is the sum of the...

Question 16

Johnson's rule is a procedure that minimizes makespan in scheduling a group of jobs on two workstations.

Accepted Answer

The answer of Johnson's rule is a procedure that minimizes...

Question 17

Makespan is the time of completion of a group of jobs,plus the starting time of the first job.

Accepted Answer

The answer of Makespan is the time of completion of...

Question 18

The percent of work time productively spent by an employee or a machine is called:&#10;A)activation.&#10;B)efficiency.&#10;C)effectiveness.&#10;D)utilization.

Accepted Answer

The answer of The percent of work time productively spent...

Question 19

Utilization is the degree to which equipment,space,or the workforce is currently being used,measured as the ratio of average output rate to the maximum capacity.

Accepted Answer

The answer of Utilization is the degree to which equipment,space,or...

Question 20

A job shop is accompanied by divergent flows and low-to-medium volume output rates.

Accepted Answer

The answer of A job shop is accompanied by divergent...

Question 21

Table J.1&#10;The framing department has six jobs waiting to be processed.It is now time zero.Times are expressed in terms of days.&#10;  &#10;Using the information in Table J.1 and the SPT rule,what is the average flow time?&#10;A)fewer than or equal to 19 days&#10;B)greater than 19 days but fewer than or equal to 21 days&#10;C)greater than 21 days but fewer than or equal to 23 days&#10;D)greater than 23 days

Accepted Answer

The answer of Table J.1&#10;The framing department has six jobs...

Question 22

Table J.2&#10;Suppose that the following six jobs must be scheduled through a car repair facility:&#10;  &#10;Use the information in Table J.2.Which one of the following jobs will be the last one completed if sequencing is done using the FCFS rule?&#10;A)A&#10;B)B&#10;C)C&#10;D)D

Accepted Answer

The answer of Table J.2&#10;Suppose that the following six jobs...

Question 23

When using the critical ratio (CR)priority sequencing rule:&#10;A)a ratio of less than 1.0 implies that the job is ahead of schedule.&#10;B)a ratio of less than 1.0 implies the job is behind schedule.&#10;C)the job with the earliest due date is scheduled next.&#10;D)the job with the highest CR is scheduled next.

Accepted Answer

The answer of When using the critical ratio (CR)priority sequencing...

Question 24

Table J.2&#10;Suppose that the following six jobs must be scheduled through a car repair facility:&#10;  &#10;Use the information in Table J.2.Which one of the following jobs will be the first one completed if sequencing is done using the EDD rule?&#10;A)A&#10;B)B&#10;C)C&#10;D)D

Accepted Answer

The answer of Table J.2&#10;Suppose that the following six jobs...

Question 25

Which one of the following rules tends to perform well with respect to percentage of jobs past due and variance of hours past due,but performs relatively poorly with respect to average flow time?&#10;A)earliest due date&#10;B)shortest processing time&#10;C)first-come,first-served&#10;D)longest processing time

Accepted Answer

The answer of Which one of the following rules tends...

Question 26

Table J.3&#10;Six jobs have just arrived at workstation 017;which has been idle.All the pertinent data are given in the following table.The shop works eight hours per day.It is now time zero.&#10;  &#10;Use the information in Table J.3.According to the slack per remaining operations rule (S/RO),which one of the following sequences is most appropriate?&#10;A)A-D-B-F-E-C&#10;B)C-D-F-B-E-A&#10;C)A-B-D-E-C-F&#10;D)D-F-B-A-C-E

Accepted Answer

The answer of Table J.3&#10;Six jobs have just arrived at...

Question 27

Determining a production sequence for a group of jobs in a two-station flow shop to minimize the makespan has the advantage of:&#10;A)maximizing the utilization of the shop.&#10;B)minimizing the percentage of jobs past due.&#10;C)minimizing the flow time of jobs on the first machine.&#10;D)minimizing the variance of past-due hours.

Accepted Answer

The answer of Determining a production sequence for a group...

Question 28

Table J.2&#10;Suppose that the following six jobs must be scheduled through a car repair facility:&#10;  &#10;Use the information in Table J.2.Which one of the following jobs will be the first one completed if sequencing is done using the SPT rule?&#10;A)A&#10;B)B&#10;C)C&#10;D)D

Accepted Answer

The answer of Table J.2&#10;Suppose that the following six jobs...

Question 29

Table J.3&#10;Six jobs have just arrived at workstation 017;which has been idle.All the pertinent data are given in the following table.The shop works eight hours per day.It is now time zero.&#10;  &#10;Use the information in Table J.3.If the critical ratio rule is used,what is the average flow time?&#10;A)fewer than or equal to 25 hours&#10;B)greater than 25 but fewer than or equal to 27 hours&#10;C)greater than 27 but fewer than or equal to 29 hours&#10;D)greater than 29 hours

Accepted Answer

The answer of Table J.3&#10;Six jobs have just arrived at...

Question 30

Table J.1&#10;The framing department has six jobs waiting to be processed.It is now time zero.Times are expressed in terms of days.&#10;  &#10;Using the information in Table J.1 and the SPT rule,what is the average past due?&#10;A)0 days&#10;B)greater than 0 days but fewer than or equal to 5 days&#10;C)greater than 5 days but fewer than or equal to 10 days&#10;D)greater than 10 days

Accepted Answer

The answer of Table J.1&#10;The framing department has six jobs...

Question 31

Table J.1&#10;The framing department has six jobs waiting to be processed.It is now time zero.Times are expressed in terms of days.&#10;  &#10;Using the information in Table J.1 and the EDD rule,what is the average flow time?&#10;A)fewer than or equal to 25 days&#10;B)greater than 25 days but fewer than or equal to 27 days&#10;C)greater than 27 days but fewer than or equal to 29 days&#10;D)greater than 29 days

Accepted Answer

The answer of Table J.1&#10;The framing department has six jobs...

Question 32

Table J.3&#10;Six jobs have just arrived at workstation 017;which has been idle.All the pertinent data are given in the following table.The shop works eight hours per day.It is now time zero.&#10;  &#10;Use the information in Table J.3.According to the shortest processing time rule (SPT),which one of the following sequences is most appropriate?&#10;A)A-B-C-D-E-F&#10;B)E-A-B-C-D-F&#10;C)B-C-E-D-F-A&#10;D)D-E-F-A-C-B

Accepted Answer

The answer of Table J.3&#10;Six jobs have just arrived at...

Question 33

Table J.1&#10;The framing department has six jobs waiting to be processed.It is now time zero.Times are expressed in terms of days.&#10;  &#10;Using the information in Table J.1 and the EDD rule,what is the average early time?&#10;A)0 days&#10;B)greater than 0 but less than 1.5 days&#10;C)greater than 2.5 but less than 2.5 days&#10;D)greater than 2.5 days

Accepted Answer

The answer of Table J.1&#10;The framing department has six jobs...

Question 34

When choosing a priority sequencing rule:&#10;A)select multiple-dimension rules because they dominate single-dimension rules for all performance measures.&#10;B)always select the rule that minimizes the amount of past-due jobs.&#10;C)test a variety of rules before making a decision.&#10;D)select CR or S/RO because they use more information.

Accepted Answer

The answer of When choosing a priority sequencing rule:&#10;A)select multiple-dimension...

Question 35

Table J.1&#10;The framing department has six jobs waiting to be processed.It is now time zero.Times are expressed in terms of days.&#10;  &#10;Using the information in Table J.1 and the FCFS rule,what is the average flow time?&#10;A)fewer than or equal to 19 days&#10;B)greater than 19 days but fewer than or equal to 21 days&#10;C)greater than 21 days but fewer than or equal to 23 days&#10;D)greater than 23 days

Accepted Answer

The answer of Table J.1&#10;The framing department has six jobs...

Question 36

Table J.2&#10;Suppose that the following six jobs must be scheduled through a car repair facility:&#10;  &#10;Use the information in Table J.2.What is the past due time of the last job completed if sequencing is done using the earliest due date rule?&#10;A)30&#10;B)40&#10;C)45&#10;D)60

Accepted Answer

The answer of Table J.2&#10;Suppose that the following six jobs...

Question 37

Table J.1&#10;The framing department has six jobs waiting to be processed.It is now time zero.Times are expressed in terms of days.&#10;  &#10;Using the information in Table J.1 and the FCFS rule,what is the average past due?&#10;A)0 days&#10;B)greater than 0 days but fewer than or equal to 5.5 days&#10;C)greater than 5.5 days but fewer than or equal to 10 days&#10;D)greater than 10 days

Accepted Answer

The answer of Table J.1&#10;The framing department has six jobs...

Question 38

Table J.2&#10;Suppose that the following six jobs must be scheduled through a car repair facility:&#10;  &#10;Use the information in Table J.2.What is the past due time of the last job completed if sequencing is done using the SPT rule?&#10;A)45&#10;B)55&#10;C)65&#10;D)70

Accepted Answer

The answer of Table J.2&#10;Suppose that the following six jobs...

Question 39

Table J.3&#10;Six jobs have just arrived at workstation 017;which has been idle.All the pertinent data are given in the following table.The shop works eight hours per day.It is now time zero.&#10;  &#10;Use the information in Table J.3.According to the critical ratio (CR)rule,which one of following sequences is most appropriate?&#10;A)F-A-D-B-E-C&#10;B)D-B-F-E-A-C&#10;C)A-B-D-F-E-C&#10;D)C-D-F-B-A-E

Accepted Answer

The answer of Table J.3&#10;Six jobs have just arrived at...

Question 40

Table J.2&#10;Suppose that the following six jobs must be scheduled through a car repair facility:&#10;  &#10;Use the information in Table J.2.What is the flow time of the last job completed if sequencing is done using the SPT rule?&#10;A)47&#10;B)62&#10;C)113&#10;D)114

Accepted Answer

The answer of Table J.2&#10;Suppose that the following six jobs...

Question 41

Table J.4&#10;Workstation 1 has five jobs waiting to be processed.It is now time 0,and times are expressed in terms of days.All pertinent data are given in the following table.&#10;  &#10;Using the information in Table J.4 and the SPT rule,what is the average days past due?&#10;A)fewer than or equal to 1.0&#10;B)greater than 1.0 but fewer than or equal to 2.0&#10;C)greater than 2.0 but fewer than or equal to 3.0&#10;D)greater than 3.0

Accepted Answer

The answer of Table J.4&#10;Workstation 1 has five jobs waiting...

Question 42

Table J.3&#10;Six jobs have just arrived at workstation 017;which has been idle.All the pertinent data are given in the following table.The shop works eight hours per day.It is now time zero.&#10;  &#10;Use the information in Table J.3.If the EDD rule is used,what is the average past due?&#10;A)fewer than or equal to 1 hour&#10;B)greater than 1 but fewer than or equal to 2 hours&#10;C)greater than 2 but fewer than or equal to 3 hours&#10;D)greater than 3 hours

Accepted Answer

The answer of Table J.3&#10;Six jobs have just arrived at...

Question 43

Table J.5&#10;The following three jobs just arrived (end of hour 0)at Workstation A.They are the only ones waiting to be processed.&#10;  &#10;Use the information in Table J.5.The sequence of jobs using the slack per remaining operations (S/RO)rule,is:&#10;A)1-3-2&#10;B)3-2-1&#10;C)1-2-3&#10;D)2-3-1

Accepted Answer

The answer of Table J.5&#10;The following three jobs just arrived...

Question 44

Table J.4&#10;Workstation 1 has five jobs waiting to be processed.It is now time 0,and times are expressed in terms of days.All pertinent data are given in the following table.&#10;  &#10;Using the information in Table J.4 and the EDD rule,what is the average days past due?&#10;A)fewer than or equal to 1.0&#10;B)greater than 1.0 but fewer than or equal to 2.0&#10;C)greater than 2.0 but fewer than or equal to 3.0&#10;D)greater than 3.0

Accepted Answer

The answer of Table J.4&#10;Workstation 1 has five jobs waiting...

Question 45

Table J.5&#10;The following three jobs just arrived (end of hour 0)at Workstation A.They are the only ones waiting to be processed.&#10;  &#10;Use the information in Table J.5.The operations sequence of jobs,using the critical ratio (CR)rule,is&#10;A)3-1-2&#10;B)3-2-1&#10;C)1-2-3&#10;D)2-3-1

Accepted Answer

The answer of Table J.5&#10;The following three jobs just arrived...

Question 46

Table J.5&#10;The following three jobs just arrived (end of hour 0)at Workstation A.They are the only ones waiting to be processed.&#10;  &#10;Use the information in Table J.5.The average past due using the slack per remaining operations (S/RO)rule is:&#10;A)fewer than or equal to 9.0.&#10;B)greater than 9.0 but fewer than or equal to 18.0.&#10;C)greater than 18.0 but fewer than or equal to 27.0.&#10;D)greater than 27.0.

Accepted Answer

The answer of Table J.5&#10;The following three jobs just arrived...

Question 47

Table J.8&#10;Auto Data produces custom engineering testing equipment.The following six jobs are currently in the design department.The time since each one arrived,the processing time,and the due date are shown below.All times are expressed in terms of days.Let now be the beginning of Day 1.&#10;  &#10;Using the information in Table J.8 and the EDD rule,what is the average days past due?&#10;A)fewer than or equal to 8.0 days&#10;B)greater than 8.0 days but fewer than or equal to 9.5 days&#10;C)greater than 9.5 but fewer than or equal to 11.0 days&#10;D)greater than 11.0 days

Accepted Answer

The answer of Table J.8&#10;Auto Data produces custom engineering testing...

Question 48

Table J.7&#10;The following four jobs just arrived (end of hour 0)at Workstation A.They are the only ones waiting to be processed.&#10;  &#10;Using the information in Table J.7 and the slack per remaining operations (S/RO)rule,what is the job sequence?&#10;A)A-B-C-D&#10;B)A-C-D-B&#10;C)C-D-B-A&#10;D)D-C-B-A

Accepted Answer

The answer of Table J.7&#10;The following four jobs just arrived...

Question 49

Table J.6&#10;All of the following three jobs just arrived (end of hour 0)at Workstation A.They are the only ones waiting to be processed.&#10;  &#10;Use the information in Table J.6.What is the average past due time at Workstation A for the critical ratio rule?&#10;A)0 hours&#10;B)greater than 0 hours but fewer than or equal to 5 hours&#10;C)greater than 5 hours but fewer than or equal to 10 hours&#10;D)greater than 10 hours

Accepted Answer

The answer of Table J.6&#10;All of the following three jobs...

Question 50

Table J.3&#10;Six jobs have just arrived at workstation 017;which has been idle.All the pertinent data are given in the following table.The shop works eight hours per day.It is now time zero.&#10;  &#10;Use the information in Table J.3.If the SPT rule is used,what is the average past due?&#10;A)fewer than or equal to 1 hour&#10;B)greater than 1 but fewer than or equal to 2 hours&#10;C)greater than 2 but fewer than or equal to 3 hours&#10;D)greater than 3 hours

Accepted Answer

The answer of Table J.3&#10;Six jobs have just arrived at...

Question 51

Table J.7&#10;The following four jobs just arrived (end of hour 0)at Workstation A.They are the only ones waiting to be processed.&#10;  &#10;Using the information in Table J.7 and the CR rule,what is the average flow time at workstation A?&#10;A)fewer than or equal to 14.0 hours&#10;B)greater than 14.0 but fewer than or equal to 14.5 hours&#10;C)greater than 14.5 but fewer than or equal to 15.0 hours&#10;D)greater than 15.0 hours

Accepted Answer

The answer of Table J.7&#10;The following four jobs just arrived...

Question 52

Table J.6&#10;All of the following three jobs just arrived (end of hour 0)at Workstation A.They are the only ones waiting to be processed.&#10;  &#10;Use the information in Table J.6.What is the job sequence at Workstation A,using the critical ratio rule?&#10;A)3-2-1&#10;B)1-2-3&#10;C)1-3-2&#10;D)2-1-3

Accepted Answer

The answer of Table J.6&#10;All of the following three jobs...

Question 53

Table J.7&#10;The following four jobs just arrived (end of hour 0)at Workstation A.They are the only ones waiting to be processed.&#10;  &#10;Using the information in Table J.7 and the critical ratio (CR)rule,what is the job sequence?&#10;A)C-D-B-A&#10;B)D-C-B-A&#10;C)A-C-D-B&#10;D)D-B-A-C

Accepted Answer

The answer of Table J.7&#10;The following four jobs just arrived...

Question 54

Table J.4&#10;Workstation 1 has five jobs waiting to be processed.It is now time 0,and times are expressed in terms of days.All pertinent data are given in the following table.&#10;  &#10;Using the information in Table J.4 and the EDD rule,what is the average flow time (in days)?&#10;A)fewer than or equal to 2.0&#10;B)greater than 2.0 but fewer than or equal to 4.0&#10;C)greater than 4.0 but fewer than or equal to 6.0&#10;D)greater than 6.0

Accepted Answer

The answer of Table J.4&#10;Workstation 1 has five jobs waiting...

Question 55

Table J.4&#10;Workstation 1 has five jobs waiting to be processed.It is now time 0,and times are expressed in terms of days.All pertinent data are given in the following table.&#10;  &#10;Using the information in Table J.4 and the FCFS rule,what is the average flow time (in days)?&#10;A)fewer than or equal to 3.0&#10;B)greater than 2.0 but fewer than or equal to 6.0&#10;C)greater than 4.0 but fewer than or equal to 9.0&#10;D)greater than 9.0

Accepted Answer

The answer of Table J.4&#10;Workstation 1 has five jobs waiting...

Question 56

Table J.6&#10;All of the following three jobs just arrived (end of hour 0)at Workstation A.They are the only ones waiting to be processed.&#10;  &#10;Use the information in Table J.6.What is the average flow time at Workstation A for the critical ratio rule?&#10;A)fewer than or equal to 8 hours&#10;B)greater than 8 hours but fewer than or equal to 9 hours&#10;C)greater than 9 hours but fewer than or equal to 10 hours&#10;D)greater than 10 hours

Accepted Answer

The answer of Table J.6&#10;All of the following three jobs...

Question 57

Table J.4&#10;Workstation 1 has five jobs waiting to be processed.It is now time 0,and times are expressed in terms of days.All pertinent data are given in the following table.&#10;  &#10;Using the information in Table J.4 and the SPT rule,what is the average flow time?&#10;A)fewer than or equal to 9 hours&#10;B)greater than 9 hours but fewer than or equal to 10 hours&#10;C)greater than 10 hours but fewer than or equal to 11 hours&#10;D)greater than 11 hours

Accepted Answer

The answer of Table J.4&#10;Workstation 1 has five jobs waiting...

Question 58

Table J.3&#10;Six jobs have just arrived at workstation 017;which has been idle.All the pertinent data are given in the following table.The shop works eight hours per day.It is now time zero.&#10;  &#10;Use the information in Table J.3.If the critical ratio rule is used,what is the average past due?&#10;A)fewer than or equal to 1 hour&#10;B)greater than 1 but fewer than or equal to 4 hours&#10;C)greater than 4 but fewer than or equal to 6 hours&#10;D)greater than 6 hours

Accepted Answer

The answer of Table J.3&#10;Six jobs have just arrived at...

Question 59

Table J.5&#10;The following three jobs just arrived (end of hour 0)at Workstation A.They are the only ones waiting to be processed.&#10;  &#10;Use the information in Table J.5.The average past due using the ratio (CR)rule,is:&#10;A)fewer than or equal to 9.0.&#10;B)greater than 9.0 but fewer than or equal to 18.0.&#10;C)greater than 18.0 but fewer than or equal to 27.0.&#10;D)greater than 27.0.

Accepted Answer

The answer of Table J.5&#10;The following three jobs just arrived...

Question 60

Table J.7&#10;The following four jobs just arrived (end of hour 0)at Workstation A.They are the only ones waiting to be processed.&#10;  &#10;Using the information in Table J.7 and the S/RO rule,what is the average flow time at Workstation A?&#10;A)fewer than or equal to 14.0 hours&#10;B)greater than 14.0 but fewer than or equal to 14.5 hours&#10;C)greater than 14.5 but fewer than or equal to 15.0 hours&#10;D)greater than 15.0 hours

Accepted Answer

The answer of Table J.7&#10;The following four jobs just arrived...

Question 61

Table J.12&#10;Consider the following problems in which six jobs must each be processed on two machines starting with machine 1 and then going to machine 2.The following processing times and due dates are in hours.&#10;  &#10;Use the information in Table J.12.What sequence would you use if you wanted to minimize the makespan of the jobs?&#10;A)A-C-E-B-D-F&#10;B)B-F-D-E-C-A&#10;C)C-F-A-E-B-D&#10;D)C-D-B-A-F-E

Accepted Answer

The answer of Table J.12&#10;Consider the following problems in which...

Question 62

Table J.9&#10;There are three jobs available for processing at Workstation 1.They just arrived at Workstation 1,at the end of Day 0.&#10;  &#10;Using the information in Table J.9 and the slack per remaining operation (S/RO)rule,what is the average days past due?&#10;A)fewer than or equal to 6.0 days&#10;B)greater than 6.0 days but fewer than or equal to 8.0 days&#10;C)greater than 8.0 days but fewer than or equal to 9.0 days&#10;D)greater than 9.0 days

Accepted Answer

The answer of Table J.9&#10;There are three jobs available for...

Question 63

Table J.11&#10;Work center Q45 has four jobs that just arrived (the start of Day 1)to be processed,as shown in the following table.Assume the shop works eight hours per day.&#10;  &#10;Using the information in Table J.11 and the critical ratio rule,what should be the sequence of jobs processed at Q45?&#10;A)A-B-C-D&#10;B)D-A-C-B&#10;C)D-C-B-A&#10;D)B-C-A-D

Accepted Answer

The answer of Table J.11&#10;Work center Q45 has four jobs...

Question 64

Table J.18&#10;  &#10;Use the information Table J.18 and sequence the jobs using the SPT rule.What is the average past due?&#10;A)fewer than or equal to 29 hours&#10;B)greater than 29 hours but fewer than or equal to 31 hours&#10;C)greater than 31 hours but fewer than or equal to 33 hours&#10;D)greater than 33 hours

Accepted Answer

The answer of Table J.18&#10;  &#10;Use the information Table...

Deck 26: Operations Scheduling