A brake inspection reveals that the outboard pad is significantly thinner than the inboard pad. Technician A says the problem could be a defective dust boot that caused the caliper to seize. Technician B says the problem could be caused by poor lubrication or deformation of the machined sliding areas on the caliper and/or anchor plate. Who is correct?
A) A only
B) B only
C) both A and B
D) neither A nor B
Correct Answer:
Verified
Q60: A hard pedal (abnormally high amount of
Q61: On actuating calipers, the piston may have
Q62: _ brakes cause poor fuel economy and
Q63: Technician A readjusts the wheel bearings before
Q64: To reduce weight, _ rotors are made
Q66: Improper tightening of the wheel lug nuts
Q67: _ caliper disc brakes slide back and
Q68: Technician A says if the plated surface
Q69: The inner and outer races of tapered
Q70: Air in the disc brake hydraulic system
Unlock this Answer For Free Now!
View this answer and more for free by performing one of the following actions
Scan the QR code to install the App and get 2 free unlocks
Unlock quizzes for free by uploading documents