Deck 25: Automatic and Manual Transmissions

Full screen (f)
exit full mode
Question
A loud clicking is heard from the right front wheel only during turns.Technician A says a worn CV joint may be the cause.Technician B says a worn and noisy joint should be replaced.Who is correct?

A)Technician A
B)Technician B
C)Both A and B
D)Neither A nor B
Use Space or
up arrow
down arrow
to flip the card.
Question
Technician A says a torque converter uses fluid to transmit power from the engine to the transmission.Technician B says a clutch in the torque converter is used to increase its efficiency.Who is correct?

A)Technician A
B)Technician B
C)Both A and B
D)Neither A nor B
Question
A ........gearset consists of three gears in mesh.
Question
Which of the following is most likely to be a first gear ratio?

A)0.85:1
B)1:1
C)2.25:1
D)3.9:1
Question
A hydraulic clutch system uses a ........cylinder to apply the clutch.
Question
The three main components of a torque converter are the impeller, stator, and .........
Question
........are used to hold components of the planetary gearset.
Question
Which type of transmission uses to variable diameter pulleys as the input and output?

A)Dual-clutch
B)Manual
C)CVT
D)Hybrid power-split
Question
Which is not part of a manual transmission clutch assembly?

A)Release bearing
B)Turbine
C)Pressure plate
D)Friction disc
Question
Special ........modifiers may be needed to be added with refilling a limited slip differential.
Unlock Deck
Sign up to unlock the cards in this deck!
Unlock Deck
Unlock Deck
1/10
auto play flashcards
Play
simple tutorial
Full screen (f)
exit full mode
Deck 25: Automatic and Manual Transmissions
1
A loud clicking is heard from the right front wheel only during turns.Technician A says a worn CV joint may be the cause.Technician B says a worn and noisy joint should be replaced.Who is correct?

A)Technician A
B)Technician B
C)Both A and B
D)Neither A nor B
C
2
Technician A says a torque converter uses fluid to transmit power from the engine to the transmission.Technician B says a clutch in the torque converter is used to increase its efficiency.Who is correct?

A)Technician A
B)Technician B
C)Both A and B
D)Neither A nor B
C
3
A ........gearset consists of three gears in mesh.
planetary
4
Which of the following is most likely to be a first gear ratio?

A)0.85:1
B)1:1
C)2.25:1
D)3.9:1
Unlock Deck
Unlock for access to all 10 flashcards in this deck.
Unlock Deck
k this deck
5
A hydraulic clutch system uses a ........cylinder to apply the clutch.
Unlock Deck
Unlock for access to all 10 flashcards in this deck.
Unlock Deck
k this deck
6
The three main components of a torque converter are the impeller, stator, and .........
Unlock Deck
Unlock for access to all 10 flashcards in this deck.
Unlock Deck
k this deck
7
........are used to hold components of the planetary gearset.
Unlock Deck
Unlock for access to all 10 flashcards in this deck.
Unlock Deck
k this deck
8
Which type of transmission uses to variable diameter pulleys as the input and output?

A)Dual-clutch
B)Manual
C)CVT
D)Hybrid power-split
Unlock Deck
Unlock for access to all 10 flashcards in this deck.
Unlock Deck
k this deck
9
Which is not part of a manual transmission clutch assembly?

A)Release bearing
B)Turbine
C)Pressure plate
D)Friction disc
Unlock Deck
Unlock for access to all 10 flashcards in this deck.
Unlock Deck
k this deck
10
Special ........modifiers may be needed to be added with refilling a limited slip differential.
Unlock Deck
Unlock for access to all 10 flashcards in this deck.
Unlock Deck
k this deck
locked card icon
Unlock Deck
Unlock for access to all 10 flashcards in this deck.