Deck 22: Installing and Configuring a Usb Driver for 1756-L7 Series Controllers

Question 1

The path displayed in the RSLogix 5000 project Path toolbar is referred to as the ____________________ path.

Answer 1

current

Question 2

When the gears to the left of the Path toolbar are turning, this signifies that the controller is ____________________.

Answer 2

online

Question 3

The initial install of the USB driver on the personal computer is required before using RSLinx to configure the driver.

Answer 3

True

Question 4

After clicking + to the left of the USB driver in the RSWho screen, the controller should be displayed in both the right and left panes.

Question 5

When configuring a driver, verify that RSLinx is current for the version of RSLogix 5000 software being used.

Question 6

Clicking the ____________________ button in the Who Active window sets the path in the Path toolbar.

Question 7

One way to configure a new path is to click the network icon on the Language Element toolbar.

Question 8

RSLogix 5000 software version 20 is the minimum in order to incorporate the 1756-L73 series controllers into a project and configure USB communications.

Question 9

If a controller icon is not currently displayed in the RSWho screen, this indicates that communications was established at one time, but not in the current session.

Question 10

A Rockwell Automation 9300-USBS USB to serial adapter is used to communicate between a personal computer with a standard serial port and a programmable automation controller (PAC) with a USB port.

Question 11

After downloading a RSLogix 5000 project, put the controller in ____________________ mode.

Question 12

One way to configure the desired communications path is to click Communications from the RSLogix 5000 software Menu Bar and then click ____________________.

Question 13

If the Go Online, Upload..., and Download buttons are grayed in the Who Active window, this indicates that a valid communications path has yet to be configured.

Question 14

Before you can upload, download, or go online with a controller, you must verify whether the correct ____________________ path is displayed in the RSLogix 5000 project Path toolbar

Question 15

The earliest controllers that featured a USB port were the 1756-L6 series controllers.