Question 1

Pressurized hydraulic systems do not pose a safety hazard to individals working on them.

Accepted Answer

Pressurized hydraulic systems can pose a safety hazard to individuals working on them. If proper safety procedures are not followed, the pressurized fluid in the system can cause serious injury or even death. It is important for individuals to receive proper training and use appropriate personal protective equipment when working on pressurized hydraulic systems.

Question 2

MSDS is the acronym for Management Safety Driving School

Accepted Answer

MSDS actually stands for Material Safety Data Sheet, which provides information on the properties and hazards of chemicals.

Question 3

Typical methods of transportation to a wind turbine include: surface vessel, service truck, and _________.&#10;A) helicopter&#10;B) ultra-light&#10;C) water skis&#10;D) Amtrak

Accepted Answer

Helicopters are commonly used for transporting personnel and equipment to wind turbines located offshore or in remote areas where access by surface vehicles may be difficult or impossible.

Question 4

Hot work activities in a wind turbine nacelle should include a permit process.

Accepted Answer

Hot work activities in a wind turbine nacelle, such as welding or cutting, should undergo a permit process to ensure that proper safety measures are in place and risks are minimized. This helps prevent fires or explosions that can be hazardous to personnel working in the nacelle and can also cause damage to the turbine.

Question 5

Rigging and lifting activities are not common when working around wind turbines.

Accepted Answer

Rigging and lifting activities are common when working around wind turbines, as technicians often need to use cranes and other equipment to install, maintain, and replace components such as blades, generators, and gearboxes. These activities pose significant risks, and proper training, procedures, and equipment are essential to ensure safe operations.

Question 6

Zero energy condition means that all energy sources have been isolated, de-energized, and disabled to prevent re-energizing.

Accepted Answer

The definition of zero energy condition states that all energy sources have been isolated, de-energized and disabled to prevent re-energizing. Therefore, the statement is true.

Question 7

Steps to provide an electrically safe work environment include: planning, implementation, safety meetings, and ________.&#10;A) fire extinguishers&#10;B) ample water supply&#10;C) equipped service truck&#10;D) monitoring

Accepted Answer

The missing step is monitoring. After planning and implementing safety measures, it is important to continuously monitor the work environment to ensure that the electrical hazards are being minimized and that employees are following safe work practices.

Question 8

Job Safety Analysis (JSA) is a tool used to determine and eliminate work hazards before someone can be hurt on the job.

Accepted Answer

Job Safety Analysis (JSA) is a well-known hazard assessment technique that is utilized to identify and mitigate potential hazards associated with various job tasks or operations. It aims to prevent workplace accidents and injuries by analyzing job procedures and activities and identifying potential hazards before they can cause harm to the workers.

Question 9

Match between columns&#10;                        Premises: Combustible organic materials such as paper and wood&#10;Combustible organic materials such as paper and wood&#10;Combustible organic materials such as paper and wood&#10;Combustible organic materials such as paper and wood

Accepted Answer

The Answer of D and B and C and A is...

Question 10

Match between columns&#10;                        Premises: Flammable liquids and gasses&#10;Flammable liquids and gasses&#10;Flammable liquids and gasses&#10;Flammable liquids and gasses

Accepted Answer

The Answer of D and B and C and A is...

Question 11

Match between columns&#10;                        Premises: Energized electrical devices&#10;Energized electrical devices&#10;Energized electrical devices&#10;Energized electrical devices

Accepted Answer

The Answer of D and B and C and A is...

Question 12

Safety hazards associated with working outside may include: stings, bites, and __________.&#10;A) hypothermia&#10;B) hyperthermia&#10;C) frost bite&#10;D) All answers are correct

Accepted Answer

The answer of Safety hazards associated with working outside may...

Question 13

LOTO is the flavor of a popular ice cream.

Accepted Answer

The answer of LOTO is the flavor of a popular...

Question 14

A &#34;confined space&#34; is defined as an area with limited access, capable of being entered to perform work, and _________.&#10;A) located in a submarine&#10;B) not intended for employee occupancy&#10;C) always painted red&#10;D) below a fuel hopper

Accepted Answer

The answer of A &#34;confined space&#34; is defined as an...

Question 15

Implementing practices to provide a safe work environment are optional if it does not cost too much.

Accepted Answer

The answer of Implementing practices to provide a safe work...

Question 16

Hazards associated with chemical handling may include: burns, asphyxia, and _________.&#10;A) crush&#10;B) amputation&#10;C) poisining&#10;D) stings

Accepted Answer

The answer of Hazards associated with chemical handling may include:...

Question 17

Match between columns&#10;                        Premises: Combustible metals such as magnesium&#10;Combustible metals such as magnesium&#10;Combustible metals such as magnesium&#10;Combustible metals such as magnesium

Accepted Answer

The Answer of D and B and C and A is...

Question 18

A confined space is defined as any location that is not intended for employee occupancy, large enough for entry for a work activity, and has limited means of ingress and egress.

Accepted Answer

The answer of A confined space is defined as any...

Question 19

Affected employee is anyone that works directly in or adjacent to a controlled work area.

Accepted Answer

The answer of Affected employee is anyone that works directly...

Deck 3: Workplace Safety