Deck 8: Section Views

Question 1

A view in which the cutting plane is bent passing though selected features of the object and then removed to be on the original plane is a:

A) Half section view
B) Revolved section view
C) Removed section view
D) Aligned section view
E) Full section view

Answer 1

Aligned section view

Question 2

Which of the following sectional views does not require a cutting plane line?

A) Half section view
B) Full sections
C) Broken-out sectional view
D) Aligned sectional view
E) Removed section

Answer 2

Broken-out sectional view

Question 3

All the following statements regarding sectional views is correct except:

A) All visible edges and contours behind the cutting plane should be shown.
B) The type of cutting plane symbol you use depends on the type of sectional view to be shown.
C) Each section is completely independent of the other and drawn as if the other were not present.
D) Hidden lines are omitted in sectional views.
E) The arrows on a cutting plane indicate the viewing direction.

Answer 3

The type of cutting plane symbol you use depends on the type of sectional view to be shown.

Question 4

Which of the following statements is true regarding sectional views?

A) Thin features should not be section lined.
B) Offsets in the cutting plane are always at 90° and should always be shown in the sectional view.
C) Section lines are drawn thick and approximately 3/32" apart.
D) Dimensioning lines frequently cross section lines.
E) Section lines should be spaced proportional to the feature they are hatching.

Question 5

All of the following are elements of section views except:

A) Cutting plane line
B) Hidden lines
C) Arrowheads
D) Section lines
E) Letter identifiers, such as A-A

Question 6

When section lines are drawn, the space between cross-hatch lines should be approximately ________.

Question 7

The section view that is usually limited to symmetrical objects is the ________________.

Question 8

Items should never be section lined, even though the cutting plane passes through what objects? _____________________________.

Question 9

The section view that does not use a cutting plane line and is limited by a break line is called a ___________________.

Question 10

A cutting plane line that is not straight and is offset or bending through the object is typically of a _________________ section.

Question 11

A break used on cylindrical shafts or tubes are referred to as _______________.

Question 12

In the final drawing, cutting plane lines should be drawn thick.

Question 13

All visible edges and contours behind the cutting plane should be shown.

Question 14

Where mating surfaces meet in assembly drawings, no change is indicated in the section lines.

Question 15

The cutting plane line and arrowheads are drawn thin, like the centerline.

Question 16

Typically circular objects are drawn using half sections where required.