Deck 11: Standard Costs and Variance Analysis

Question 1

Unreasonable standards may be the cause of direct materials variances, but not of direct labour variances.

Answer 1

False

Question 2

If a variance is considered material, it should be allocated to work in process inventory, finished goods inventory, and cost of goods sold.

Answer 2

True

Question 3

The total standard cost for a unit of output is the sum of the standard costs for the resources used in production.

Answer 3

True

Question 4

The total direct labour variance can be broken down into two components: the efficiency variance and the price variance.

Question 5

The fixed overhead spending variance is normally zero because fixed costs are constant within a relevant range of activity.

Question 6

The direct materials price variance is often based on materials purchased, rather than on materials used.

Question 7

If a variance is unfavourable, it should be closed directly to cost of goods sold.

Question 8

Normal fluctuations in labour hours may cause a favourable direct labour efficiency variance.

Question 9

The standard cost of direct materials is computed as the standard price per unit of input times the standard quantity per unit of input.

Question 10

Calculating variances is a necessary, but not sufficient, step for completing a variance analysis.

Question 11

A standard cost variance is a difference between a standard cost and an actual cost.

Question 12

The direct materials efficiency variance tells managers about the efficiency of the purchasing process.

Question 13

A contract with a new supplier may cause an unfavourable materials price variance.

Question 14

Identifying the reasons for variances is usually a quick and easy process.

Question 15

The cost categories that are measured and monitored in a given organization depend, in part, on the costs that managers consider important.

Question 16

The variable overhead budget variance is the difference between allocated variable overhead cost and actual variable overhead cost.

Question 17

Variance analysis is used for monitoring and performance evaluation.

Question 18

The fixed overhead budget variance can be broken down into two parts: the spending variance and the production volume variance.

Question 19

If the total variances in the accounting information system are favourable, accountants must adjust some accounts by decreasing costs during the closing process.

Question 20

Errors in the accounting records related to actual production output could lead to a fixed overhead production volume variance.

Question 21

Welch Company budgeted the following cost standards for the current year: Direct materials = 1.40 kilograms per unit @ $1.50 per kilogram
Direct labour = 0.75 hours per unit @ $6 per hour
Actual production and costs were as follows:
Units produced = 2,800
Direct materials used = 4,500 kg.
Direct materials purchased = 5,000 kg. @ a cost of $5,850
Direct labour incurred = 2,000 hours at a cost of $13,000
The material price variance for materials purchased was:

A)$1,650 F
B)$870 U
C)$2,520 U
D)$780 F

Question 22

Variance analysis can be used for both costs and revenues.

Question 23

Hyteck, Inc. is a capital intensive firm. Indirect costs make up nearly 70% of the product costs. The company has no direct material costs because customers provide the direct materials used for each job. To plan and control such costs, the firm employs flexible budgets and standard costs. Overhead rates, based on direct labour hours, are derived from the master budget. Master Actual
Budget Results
Units produced 2,000 1,820
Direct labour hours 10,000 9,200
Fixed overhead $100,000 $98,000
Variable overhead $160,000 $150,000
Direct labour $100,000 $90,000
The fixed overhead spending variance was:

A)$9,000 U
B)$2,000 F
C)$7,000 U
D)$2,800 U

Question 24

Hyteck, Inc. is a capital intensive firm. Indirect costs make up nearly 70% of the product costs. The company has no direct material costs because customers provide the direct materials used for each job. To plan and control such costs, the firm employs flexible budgets and standard costs. Overhead rates, based on direct labour hours, are derived from the master budget. Master Actual
Budget Results
Units produced 2,000 1,820
Direct labour hours 10,000 9,200
Fixed overhead $100,000 $98,000
Variable overhead $160,000 $150,000
Direct labour $100,000 $90,000
The fixed overhead production volume variance was:

A)$9,000 U
B)$2,000 F
C)$7,000 U
D)$2,800 U

Question 25

Hyteck, Inc. is a capital intensive firm. Indirect costs make up nearly 70% of the product costs. The company has no direct material costs because customers provide the direct materials used for each job. To plan and control such costs, the firm employs flexible budgets and standard costs. Overhead rates, based on direct labour hours, are derived from the master budget. Master Actual
Budget Results
Units produced 2,000 1,820
Direct labour hours 10,000 9,200
Fixed overhead $100,000 $98,000
Variable overhead $160,000 $150,000
Direct labour $100,000 $90,000
The direct labour price variance was:

A)$2,000 F
B)$2,800 U
C)$1,000 U
D)$1,000 F

Question 26

Hogle Mfg. Co. uses a standard costing system. The standard time to produce one unit is 4 hours, and normal production is 3,000 units monthly. Overhead costs were estimated to be $135,000. The standard variable overhead rate is $5 per machine hour. During April the following results were recorded: Units produced 3,100
Units sold 2,800
Machine hours required 12,800
Actual overhead costs $136,000
The combined fixed and variable overhead spending variance was:

A)$1,000 U
B)$2,000 F
C)$7,000 U
D)$3,000 F

Question 27

Hogle Mfg. Co. uses a standard costing system. The standard time to produce one unit is 4 hours, and normal production is 3,000 units monthly. Overhead costs were estimated to be $135,000. The standard variable overhead rate is $5 per machine hour. During April the following results were recorded: Units produced 3,100
Units sold 2,800
Machine hours required 12,800
Actual overhead costs $136,000
The variable overhead efficiency variance was:

A)$8,000 U
B)$4,000U
C)$2,000 U
D)$4,000 F

Question 28

Burkett Company uses a standard cost system. Indirect costs were budgeted at $200,000 plus $15 per direct labour hour. The overhead rate is based on 10,000 hours. Actual results were: Standard direct labour hours 9,000
Actual direct labour hours 10,000
Fixed overhead $190,000
Variable overhead $185,000
The variable overhead efficiency variance was:

A)$10,000 F
B)$50,000 U
C)$35,000 U
D)$15,000 U

Question 29

(Appendix 11A)The sales price variance is calculated as (actual price - standard price)X actual volume sold.

Question 30

Burkett Company uses a standard cost system. Indirect costs were budgeted at $200,000 plus $15 per direct labour hour. The overhead rate is based on 10,000 hours. Actual results were: Standard direct labour hours 9,000
Actual direct labour hours 10,000
Fixed overhead $190,000
Variable overhead $185,000
The fixed overhead production volume variance was:

A)$15,000 F
B)$20,000 U
C)$10,000 F
D)$10,000 U

Question 31

Hyteck, Inc. is a capital intensive firm. Indirect costs make up nearly 70% of the product costs. The company has no direct material costs because customers provide the direct materials used for each job. To plan and control such costs, the firm employs flexible budgets and standard costs. Overhead rates, based on direct labour hours, are derived from the master budget. Master Actual
Budget Results
Units produced 2,000 1,820
Direct labour hours 10,000 9,200
Fixed overhead $100,000 $98,000
Variable overhead $160,000 $150,000
Direct labour $100,000 $90,000
The variable overhead spending variance was:

A)$1,200 F
B)$2,000 F
C)$2,800 U
D)$1,600 U

Question 32

Burkett Company uses a standard cost system. Indirect costs were budgeted at $200,000 plus $15 per direct labour hour. The overhead rate is based on 10,000 hours. Actual results were: Standard direct labour hours 9,000
Actual direct labour hours 10,000
Fixed overhead $190,000
Variable overhead $185,000
The variable overhead spending variance was:

A)$10,000 F
B)$50,000 U
C)$35,000 U
D)$15,000 U

Question 33

Hyteck, Inc. is a capital intensive firm. Indirect costs make up nearly 70% of the product costs. The company has no direct material costs because customers provide the direct materials used for each job. To plan and control such costs, the firm employs flexible budgets and standard costs. Overhead rates, based on direct labour hours, are derived from the master budget. Master Actual
Budget Results
Units produced 2,000 1,820
Direct labour hours 10,000 9,200
Fixed overhead $100,000 $98,000
Variable overhead $160,000 $150,000
Direct labour $100,000 $90,000
The direct labour efficiency variance was:

A)$2,000 F
B)$2,800 U
C)$1,000 U
D)$1,000 F

Question 34

Welch Company budgeted the following cost standards for the current year: Direct materials = 1.40 kilograms per unit @ $1.50 per kilogram
Direct labour = 0.75 hours per unit @ $6 per hour
Actual production and costs were as follows:
Units produced = 2,800
Direct materials used = 4,500 kg.
Direct materials purchased = 5,000 kg. @ a cost of $5,850
Direct labour incurred = 2,000 hours at a cost of $13,000
The labour price variance was:

A)$600 F
B)$400 U
C)$4,800 F
D)$1,000 U

Question 35

Hogle Mfg. Co. uses a standard costing system. The standard time to produce one unit is 4 hours, and normal production is 3,000 units monthly. Overhead costs were estimated to be $135,000. The standard variable overhead rate is $5 per machine hour. During April the following results were recorded: Units produced 3,100
Units sold 2,800
Machine hours required 12,800
Actual overhead costs $136,000
The fixed overhead production volume variance was:

A)$1,000 U
B)$2,500 F
C)$1,500 F
D)$5,000 U

Question 36

Welch Company budgeted the following cost standards for the current year: Direct materials = 1.40 kilograms per unit @ $1.50 per kilogram
Direct labour = 0.75 hours per unit @ $6 per hour
Actual production and costs were as follows:
Units produced = 2,800
Direct materials used = 4,500 kg.
Direct materials purchased = 5,000 kg. @ a cost of $5,850
Direct labour incurred = 2,000 hours at a cost of $13,000
The labour efficiency variance was:

A)$600 F
B)$400 U
C)$4,800 F
D)$1,000 U

Question 37

Burkett Company uses a standard cost system. Indirect costs were budgeted at $200,000 plus $15 per direct labour hour. The overhead rate is based on 10,000 hours. Actual results were: Standard direct labour hours 9,000
Actual direct labour hours 10,000
Fixed overhead $190,000
Variable overhead $185,000
The over- or underapplied overhead was:

A)$50,000 under
B)$10,000 over
C)$60,000 under
D)$20,000 over

Question 38

Hyteck, Inc. is a capital intensive firm. Indirect costs make up nearly 70% of the product costs. The company has no direct material costs because customers provide the direct materials used for each job. To plan and control such costs, the firm employs flexible budgets and standard costs. Overhead rates, based on direct labour hours, are derived from the master budget. Master Actual
Budget Results
Units produced 2,000 1,820
Direct labour hours 10,000 9,200
Fixed overhead $100,000 $98,000
Variable overhead $160,000 $150,000
Direct labour $100,000 $90,000
The budget variance for variable overhead was:

A)$2,800 U
B)$7,000 U
C)$4,400 U
D)$9,000 U

Question 39

(Appendix 11A)For organizations that sell multiple products, contribution margin and sales mix variances are often useful for decision making.

Question 40

Welch Company budgeted the following cost standards for the current year: Direct materials = 1.40 kilograms per unit @ $1.50 per kilogram
Direct labour = 0.75 hours per unit @ $6 per hour
Actual production and costs were as follows:
Units produced = 2,800
Direct materials used = 4,500 kg.
Direct materials purchased = 5,000 kg. @ a cost of $5,850
Direct labour incurred = 2,000 hours at a cost of $13,000
The material efficiency variance was:

A)$1,650 F
B)$870 U
C)$2,520 U
D)$780 F

Question 41

Mason, Inc. uses a standard costing system. Overhead costs are allocated based on direct labour hours. The standard variable overhead and fixed overhead rates are $1 and $5 per direct labour hour, respectively. Data relevant for the current period include: Direct materials purchased 50,000 kg. @ $12 per kg.
Direct materials used 50,000 kg.
Standard quantity of direct materials
For actual production 45,000 kg.
Direct materials standard price $13 per kg.
Direct labour costs incurred 75,000 hours @ $12 per hour
Standard direct labour hours for
Actual production 78,000 hours
Standard direct labour cost per hour $11 per hour
Variable overhead costs incurred $77,070
Fixed overhead costs incurred $381,920
The purchase of direct materials would be recorded in direct materials inventory at:

A)$540,000
B)$585,000
C)$600,000
D)$650,000

Question 42

Hogle Mfg. Co. uses a standard costing system. The standard time to produce one unit is 4 hours, and normal production is 3,000 units monthly. Overhead costs were estimated to be $135,000. The standard variable overhead rate is $5 per machine hour. During April the following results were recorded: Units produced 3,100
Units sold 2,800
Machine hours required 12,800
Actual overhead costs $136,000
The total overhead allocated was:

A)$135,000
B)$139,500
C)$141,500
D)$137,000

Question 43

Baldwin, Inc uses a standard job cost system and purchased 25,000 kg. of material at $6 per kg., and used it all. The standard amount allowed for the output achieved is 22,500 kg, and the standard price is $6.50 per kg. The company also incurred 37,500 direct labour hours for $450,000. The standard hourly price was $11 per hour, and 39,000 hours were allowed at standard. Assuming all variances are immaterial, answer the following questions: The entry to record the direct material efficiency variance will include a;

A)Debit to work in process inventory for $146,250
B)Credit to the efficiency variance for $16,250
C)Credit to the efficiency variance for $12,500
D)Credit to materials inventory for $150,000

Question 44

Given the following account balances at the end of the first year of operations: Direct materials inventory $ 60,000
Work in process inventory 120,000
Finished goods inventory 180,000
Cost of goods sold 600,000
Direct material price variance 65,000 U
Direct material efficiency 195,000 F
Assuming that variances are considered material, the entry and amount of the direct material price variance allocated to Cost of Goods Sold is:

A)Debit $40,625
B)Debit $41,082
C)Credit $43,333
D)Debit $39,935

Question 45

Favourable price variances occur because of:

A)Rising prices of finished goods
B)Increases in raw materials efficiency
C)Price decreases in raw materials
D)Efficiency in the production department

Question 46

Mason, Inc. uses a standard costing system. Overhead costs are allocated based on direct labour hours. The standard variable overhead and fixed overhead rates are $1 and $5 per direct labour hour, respectively. Data relevant for the current period include: Direct materials purchased 50,000 kg. @ $12 per kg.
Direct materials used 50,000 kg.
Standard quantity of direct materials
For actual production 45,000 kg.
Direct materials standard price $13 per kg.
Direct labour costs incurred 75,000 hours @ $12 per hour
Standard direct labour hours for
Actual production 78,000 hours
Standard direct labour cost per hour $11 per hour
Variable overhead costs incurred $77,070
Fixed overhead costs incurred $381,920
The cost of direct materials added to work in process would be:

A)$540,000
B)$585,000
C)$600,000
D)$650,000

Question 47

Mason, Inc. uses a standard costing system. Overhead costs are allocated based on direct labour hours. The standard variable overhead and fixed overhead rates are $1 and $5 per direct labour hour, respectively. Data relevant for the current period include: Direct materials purchased 50,000 kg. @ $12 per kg.
Direct materials used 50,000 kg.
Standard quantity of direct materials
For actual production 45,000 kg.
Direct materials standard price $13 per kg.
Direct labour costs incurred 75,000 hours @ $12 per hour
Standard direct labour hours for
Actual production 78,000 hours
Standard direct labour cost per hour $11 per hour
Variable overhead costs incurred $77,070
Fixed overhead costs incurred $381,920
The direct labour price variance is:

A)$30,000 Favourable
B)$30,000 Unfavourable
C)$75,000 Unfavourable
D)$78,000 Unfavourable

Question 48

The budget that reflects the level of activity management expects to attain is the:

A)Flexible budget
B)Standard budget
C)Master budget
D)Expected budget

Question 49

Given the following account balances at the end of the first year of operations: Direct materials inventory $ 60,000
Work in process inventory 120,000
Finished goods inventory 180,000
Cost of goods sold 600,000
Direct material price variance 65,000 U
Direct material efficiency 195,000 F
Assuming that variances are considered material, the entry and amount of the direct material efficiency variance allocated to work in process inventory is:

A)Credit $26,000
B)Credit $24,375
C)Debit $17,333
D)Debit $8,125

Question 50

Which department is customarily responsible for an unfavourable material price variance?

A)Sales
B)Purchasing
C)Engineering
D)Production

Question 51

Expected costs per unit of input are called:

A)Standard prices
B)Standard costs
C)Standard quantities
D)Standard ideals

Question 52

Standard costing allows management to:
I) Measure performance
II) Identify inefficiencies
III) Control costs

A)I and II only
B)I and III only
C)II and III only
D)I, II, and III

Question 53

Brodie Co. uses a standard job cost system and a denominator volume of 25,000 direct labour hours for allocating overhead. The actual output was 12,000 units, which cost $185,700 for direct labour (23,000 hours), $27,525 for variable overhead, and $136,400 for fixed overhead. The standard variable overhead per unit is $2 (2 hours @ $1 per hour), and the standard fixed overhead per unit is $10 (2 hours @ $5 per hour). All variances are immaterial and are closed to Cost of Goods Sold at the end of the period. The entry to close the fixed overhead variances includes a:

A)Credit to work in process for $120,000
B)Debit to fixed overhead control for $125,000
C)Debit to Cost of Goods Sold for $16,400
D)Debit to the fixed overhead production volume variance for $5,000

Question 54

Baldwin, Inc uses a standard job cost system and purchased 25,000 kg. of material at $6 per kg., and used it all. The standard amount allowed for the output achieved is 22,500 kg, and the standard price is $6.50 per kg. The company also incurred 37,500 direct labour hours for $450,000. The standard hourly price was $11 per hour, and 39,000 hours were allowed at standard. Assuming all variances are immaterial, answer the following questions: The entry to record the direct labour variances will include a:

A)Credit to wages payable for $429,000
B)Debit to wages expense for $450,000
C)Debit to work in process inventory for $412,500
D)Credit to direct labour efficiency variance for $16,500

Question 55

Brodie Co. uses a standard job cost system and a denominator volume of 25,000 direct labour hours for allocating overhead. The actual output was 12,000 units, which cost $185,700 for direct labour (23,000 hours), $27,525 for variable overhead, and $136,400 for fixed overhead. The standard variable overhead per unit is $2 (2 hours @ $1 per hour), and the standard fixed overhead per unit is $10 (2 hours @ $5 per hour). All variances are immaterial and are closed to Cost of Goods Sold at the end of the period. The entry to close the variable overhead variances includes a:

A)Credit to the variable overhead spending variance for $4,525
B)Credit to work in process for $24,000
C)Credit to the variable overhead efficiency variance for $1,000
D)Debit to Cost of Goods Sold for $5,525

Question 56

Given the following account balances at the end of the first year of operations: Work in process inventory $ 90,000
Finished goods inventory 165,000
Cost of goods sold 495,000
Direct labour price variance 35,000 U
Direct labour efficiency variance 17,000 F
Assuming that variances are considered material, the entry and amount of direct labour variances allocated to the Finished Goods Inventory is:

A)Credit $3,740
B)Debit $2,160
C)Credit $770
D)Debit $3,960

Question 57

For overhead variances, the difference between the flexible budget amounts and actual costs incurred is called the:

A)Efficiency variance
B)Budget variance
C)Favourable variance
D)Quantity variance

Question 58

Mason, Inc. uses a standard costing system. Overhead costs are allocated based on direct labour hours. The standard variable overhead and fixed overhead rates are $1 and $5 per direct labour hour, respectively. Data relevant for the current period include: Direct materials purchased 50,000 kg. @ $12 per kg.
Direct materials used 50,000 kg.
Standard quantity of direct materials
For actual production 45,000 kg.
Direct materials standard price $13 per kg.
Direct labour costs incurred 75,000 hours @ $12 per hour
Standard direct labour hours for
Actual production 78,000 hours
Standard direct labour cost per hour $11 per hour
Variable overhead costs incurred $77,070
Fixed overhead costs incurred $381,920
The variable overhead spending variance is:

A)$930 Favourable
B)$2,070 Unfavourable
C)$33,000 Unfavourable
D)$3,300 Unfavourable

Question 59

Mason, Inc. uses a standard costing system. Overhead costs are allocated based on direct labour hours. The standard variable overhead and fixed overhead rates are $1 and $5 per direct labour hour, respectively. Data relevant for the current period include: Direct materials purchased 50,000 kg. @ $12 per kg.
Direct materials used 50,000 kg.
Standard quantity of direct materials
For actual production 45,000 kg.
Direct materials standard price $13 per kg.
Direct labour costs incurred 75,000 hours @ $12 per hour
Standard direct labour hours for
Actual production 78,000 hours
Standard direct labour cost per hour $11 per hour
Variable overhead costs incurred $77,070
Fixed overhead costs incurred $381,920
The direct materials efficiency variance is:

A)$60,000 Favourable
B)$60,000 Unfavourable
C)$65,000 Favourable
D)$65,000 Unfavourable

Question 60

Baldwin, Inc uses a standard job cost system and purchased 25,000 kg. of material at $6 per kg., and used it all. The standard amount allowed for the output achieved is 22,500 kg, and the standard price is $6.50 per kg. The company also incurred 37,500 direct labour hours for $450,000. The standard hourly price was $11 per hour, and 39,000 hours were allowed at standard. Assuming all variances are immaterial, answer the following questions: The entry to record the direct material price variance will include a:

A)Debit to materials inventory for $150,000
B)Debit to account payable for $162,500
C)Credit to the price variance for $12,500
D)Debit to the price variance for $16,250

Question 61

Unattainable standards are likely to lead to:
I) Errors in the accounting information system
II) Favourable variances
III) Unfavourable variances

A)I only
B)II only
C)III only
D)I and III only

Question 62

Variance analysis includes which of the following processes?
I) Calculating variances
II) Analyzing the reasons variances occurred
III) Predicting variances in future periods

A)I and II only
B)I and III only
C)II and III only
D)I, II, and III

Question 63

Managers investigate:

A)All variances
B)All unfavourable variances
C)Variances they consider important
D)Variances that are reported in the financial statements

Question 64

LST Corporation entered into a new contract with one of its raw material suppliers. The new contract required the supplier to deliver raw materials with a 24-hour notice from LST. This reduces LST's material handling costs, but has increased the cost of the raw materials delivered. Which of the following variances is most likely to result?

A)Unfavourable direct material price variance
B)Favourable direct price variance
C)Unfavourable variable overhead spending variance
D)Unfavourable fixed overhead spending variance

Question 65

Which of the following is not a typical step in variance analysis?

A)Calculate variances
B)Identify reasons for variances
C)Report variances in financial statements
D)Draw conclusions and take action

Question 66

Variances can be caused by:
I) Out-of-control operations
II) Better-than-expected operations
III) Inappropriate benchmarks

A)I and III only
B)II and III only
C)I and II only
D)I, II, and III

Question 67

Theft of raw materials is most likely to lead to:

A)Direct materials price variance
B)Favourable direct materials price variance
C)Unfavourable direct materials efficiency variance
D)Favourable direct materials efficiency variance

Question 68

How do managers decide which variances are important enough to investigate?
I) By considering whether they are favourable or unfavourable
II) By calculating and investigating all possible variances
III) By considering whether it is large enough to justify investigation

A)I only
B)II only
C)III only
D)I and III only

Question 69

At the end of 20x1, ELM Corporation's production manager estimated direct labour overtime hours at 200 for the first quarter of 20x2. At the end of the first quarter, actual overtime hours totalled 180. This difference is most likely to lead to:

A)Favourable variable overhead spending variance
B)Unfavourable production volume variance
C)Favourable labour efficiency variance
D)Unfavourable labour efficiency variance

Question 70

If a variance analysis shows that operations are better than expected, managers should:

A)Do nothing
B)Revise standard costs to make them harder to achieve
C)Distribute extra dividends to shareholders
D)Monitor quality to ensure it was maintained

Question 71

ELM Corporation introduced a new automated production process that has reduced the amount of labour needed, but not affected the use of materials. The standard cost system has not been changed yet to reflect this new process. Assuming the machinery is functioning properly and that workers were properly trained in its use, which of the following variances is most likely to result?

A)Favourable variable overhead spending variance
B)Favourable direct labour efficiency variance
C)Unfavourable direct labour efficiency variance
D)Favourable direct materials price variance

Question 72

A favourable variance in one area might be offset by:

A)Favourable variance in another area
B)Unfavourable variance in another area
C)Increase in period costs
D)Decrease in period costs

Question 73

Intentional worker damage is most likely to result in which type of variance?

A)Direct materials price variance
B)Direct materials efficiency variance
C)Direct labour price variance
D)Variable overhead spending variance

Question 74

The process of calculating variances and analyzing the reasons they occurred is called:

A)Variance analysis
B)Budget analysis
C)Historical analysis
D)Activity-based analysis

Question 75

The production manager of CLR Corporation calculated a material and unfavourable variance of $4,000 with respect to the cost of direct materials. Which of the following is a likely next step for the production manager?

A)Identify and discipline the responsible employee
B)Take actions to prevent the variance from recurring
C)Ascertain the cause of the variance
D)Switch suppliers for direct materials

Question 76

If a variance is investigated and determined to be random, managers should:

A)Write off the variance against cost of goods sold
B)Do nothing
C)Identify and discipline the employee(s)responsible
D)Write off the variance against work in process

Question 77

Which of the following is a possible cause of an unfavourable materials efficiency variance?

A)Using materials that do not meet specifications
B)Using a higher class of labour than called for
C)Using a higher quality of material than called for
D)Using fewer hours of labour than labour specifications call for

Question 78

Standard costs should be reviewed:

A)Daily
B)Monthly
C)Annually
D)As often as managers and accountants deem necessary

Question 79

In a traditional manufacturing accounting system, the standard cost of a unit of output is the sum of the standard costs of:

A)Direct material, direct labour, and variable overhead
B)Direct material, direct labour ,and fixed overhead
C)Direct material, direct labour, and period costs
D)Direct material, direct labour, variable overhead, and fixed overhead

Question 80

Variance analysis involves the steps listed below. In which order should the steps be performed? 1. Calculate variances
2) Choose variances for further investigation
3) Draw conclusions and take action
4) Identify reasons for variances

A)1, 2, 3, 4
B)2, 1, 3, 4
C)2, 1, 4, 3
D)1, 2, 4, 3