Deck 6: Power Tools and Equipment

Question 1

Power wrench output shafts come in two common variations: the detent ball and the retaining ring.

Answer 1

True

Question 2

____ are used for fast removal of material.

A) Air ratchets
B) Heat guns
C) Sanders
D) Grinders

Answer 2

D

Question 3

The ____ grinder is MOST-Likely to be used with mounted points and carbide burrs for a variety of applications, such as weld cleaning, deburring, blending, and smoothing.

A) cut off grinder
B) small wheel grinder
C) angle grinder
D) die grinder

Answer 3

D

Question 4

A(n) ____ wrench, like the hand ratchet, has a special ability to work in hard-to-reach places.

A) impact
B) air drill
C) file
D) air ratchet

Question 5

The manufacturer's rated capacity is shown on the nameplate affixed to the lift.

Question 6

A(n) ____ is a portable, hand-held, reversible, air-powered tool for rapid turning of bolts and nuts.

A) air file
B) impact wrench
C) in-line oiler
D) sander pad

Question 7

The ____ is a soft mounting surface for the sandpaper.

A) air ratchet
B) sander pad
C) impact wrench
D) hydraulic lift

Question 8

An air sander atomizes liquid by breaking it into a fine mist of droplets.

Question 9

The spray gun air cap works with the air valve to control the spray pattern of the paint.

Question 10

Impact tools are usually flat and chrome in color, not black.

Question 11

While having a discussion, Technician A says that when important, final torque should be done by hand with a torque wrench.Technician B says that you should always use an air impact wrench.Who is correct?

A) A only
B) B only
C) Both A and B
D) Neither A nor B

Question 12

Self-stick adhesive paper, or hook and loop paper holds the sandpaper onto the pad.

Question 13

An air chuck is used to measure the amount of pressure in a tire.

Question 14

A(n) ____ is a long, thin board sander for working large flat surfaces on panels.

A) air file
B) air drill
C) in-line oiler
D) body jack

Question 15

The use of any of air-driven or electric power tool requires that you wear safety glasses or a face shield.

Question 16

Most rough sanding done in automotive work is done with a grinder.

Question 17

More and more most commonly used air or electric tools are now being released with a battery alternative version of the same tool.

Question 18

____ use shop air pressure to spin a drill bit.

A) Air drills
B) Power tools
C) Body jacks
D) Grinders

Question 19

An air saw uses a reciprocating action and a hacksaw-type blade to quickly cut through metal.

Question 20

All of the following are examples of air tools EXCEPT:

A) the air saw
B) the air scraper
C) the air jack
D) the air chisel

Question 21

A(n) ____ is used to smooth and shine painted surfaces by spinning a soft buffing pad.

A) air ratchet
B) grinder
C) buffer/polisher
D) spray gun

Question 22

A(n) ____ is a hydraulic hand pump and ram for minor body and frame straightening operations.

A) in-line oiler
B) grinder
C) body jack
D) impact wrench

Question 23

____ is mainly used to grind down spot welds for faster welded panel removal.

A) Air saw
B) Air scraper
C) Belt sander
D) Air chisel

Question 24

Which of the following statements is LEAST-Likely to be true?

A) When using extension cords, always plug the cord of the tool into the extension cord before the extension cord is inserted into a convenience outlet.
B) Extension cords should be long enough to make connections without being pulled taut, creating unnecessary strain and wear.
C) Extension cords should be checked frequently while in use to detect unusual heating.
D) Always unplug the extension cord from the receptacle after the cord of the tool is unplugged from the extension cord.

Question 25

A(n) _________________________ uses an abrasive action to smooth and shape body surfaces.

Question 26

The most commonly used portable air grinder in collision repair shops is the ______________________________.

Question 27

While having a discussion, Technician A says that if an extension cord is used, it should be kept as long as possible.Technician B says that very long cords will reduce operating voltage and thus reduce operating efficiency.Who is correct?

A) A only
B) B only
C) Both A and B
D) Neither A nor B

Question 28

____ are used for a wide variety of grinding jobs, from sharpening cutting tools to deburring.

A) Grinding wheels
B) Buffing wheels
C) Disc wheels
D) Wire wheels

Question 29

The statement below that is MOST-Likely false is:

A) Always overload the lift.
B) Inspect the lift daily.
C) Before removing the vehicle from the lift area, position the arms, adapters, or axle supports to ensure that the vehicle or lift will not be damaged.
D) After lifting a vehicle to the desired height, always lower the unit onto mechanical safeties.

Question 30

Which of the following is LEAST-Likely to be considered a major problem associated with hydraulic tools?

A) Spongy effect
B) The tool will not extend all the way
C) The tool leaks under pressure
D) The tool will retract

Question 31

_________________________ are used to apply sealer, primer, paint, and other liquid finishing materials to a vehicle.

Question 32

All of the following are considered important electric only tools EXCEPT:

A) spray guns
B) drill presses
C) heat guns
D) bench grinders

Question 33

A ____ is a large electro/hydraulic machine for holding a vehicle while pulling out major structural damage.

A) frame rack
B) grinder
C) sander pad
D) spray gun

Question 34

A(n) ____ is an attachment that will automatically meter oil into air lines for air tools.

A) spray gun
B) in-line oiler
C) body jack
D) heat gun

Question 35

A must in every body and refinishing shop is a(n) ______________________________ for removing dust and debris from the vehicle interior.

Question 36

____ are used in almost all vinyl roof repairs as well as other plastic repairs.

A) Body jacks
B) Hydraulic lifts
C) Heat guns
D) Sander pads

Question 37

_________________________ use air pressure (pneumatic), oil pressure (hydraulic), or electrical energy to effect repairs.