Deck 26: Configuring a 1756-Enet Ethernet Driver Using Rs Linx

Question 1

In the Configure Drivers window, the word "running" listed twice for a configured driver verifies communication with the target device.

Answer 1

False

Question 2

After a driver has been configured, open the ____________________ window to verify communication has been established with the target device.

Answer 2

RSWho

Question 3

To configure a driver for the 1756-ENET or to manually configure the newer modules, select the ____________________ driver in the Configure Drivers window.

Answer 3

Ethernet devices

Question 4

In the Configure Drivers window, the driver that can only be used to configure modules newer than the 1756-ENET is the ____________________ driver.

Question 5

What steps can be taken if the word "running" is not listed twice for a configured 1756-ENET Ethernet driver in the Configure Drivers window?

Question 6

When configuring a 1756-ENET Ethernet driver using RSLinx, select a dummy modem cable to connect the module and the personal computer.

Question 7

The 1756-ENET Ethernet driver must be configured prior to configuring the personal computer with which communication is desired.

Question 8

When configuring a 1756-ENET Ethernet driver using RSLinx, enter the IP address of the 1756-ENET module in the Configure Driver window; do not enter the IP address of the personal computer.

Question 9

In the Add New RSLinx Classic Driver window, the best option is to accept the default driver name.

Question 10

In regard to communication problems, what actions can be taken if the 1756-ENET Ethernet module is currently unrecognized?