Deck 25: Configuring the Ethernet Ip Address for a Compact Logix 1769-L23e, 1769-L32e, or 1769-L35e

Question 1

The 1769-L23s are available with embedded ControlNet communications.

Answer 1

False

Question 2

All 1769 CompactLogix controllers are supplied with one serial and one Ethernet port.

Answer 2

False

Question 3

When configuring a basic Ethernet network, the IP addresses and ____________________ in all devices on the same network must be compatible.

Answer 3

subnet masks

Question 4

For a new 1769 CompactLogix device, or if you are unsure of the Ethernet port configuration, what can be done to view, modify, or initially configure the Ethernet port?

Question 5

A new Ethernet device comes from the factory configured as ____________________.

Question 6

The CompactLogix Ethernet/IP address changes frequently after installing a network and configuring other devices on the network.

Question 7

To use a serial driver to view or modify a CompactLogix controller's Ethernet IP address, begin by connecting a 1756-CP3, or ____________________ cable, between the personal computer and CompactLogix controller serial port.

Question 8

The software that verifies that a serial driver is configured and running is the ____________________ software.

Question 9

The newest members of the CompactLogix family, released at the end of 2011 with version 20 of RSLogix 5000 Software, replace the standard serial port with a(n) ____________________ port.

Question 10

The number groups in an IP address are referred to as ____________________.

Question 11

The 1768 CompactLogix requires that separate communications modules be purchased for chassis slot insertion, as the 1768 CompactLogix controller is only available with a(n) ____________________ port.

Question 12

DeviceNet communications require the separate purchase of the communications modules for insertion into a CompactLogix slot.

Question 13

Communication with an Ethernet device using Ethernet communications is not possible until the device is configured and/or the IP address for the device is known.

Question 14

In many industrial networks, a controller's network configuration type is configured as ____________________.

Question 15

What happens to previously configured communications to a controller if its IP address is modified?