Deck 9: Detail, Assembly, and Subassembly Prints

Question 1

____ drawings are helpful in the interpretation of prints and the assembly of parts.

A) Assembly
B) Usage
C) Subassembly
D) Building

Answer 1

C

Question 2

Assembly prints may consist of one or more ____________________ of the assembled unit.

Answer 2

views

Question 3

When a unit consists of several parts, and they are to be shown on one print, each part must be ____________________.

Answer 3

identified

Question 4

Components of weldments are shown in detail by prints that are called detail or ____ prints.

A) planning
B) working
C) assembly
D) mated

Question 5

All assembly prints are used as detail prints when complete dimensions are applied to all of the assembled parts.

Question 6

It is preferred practice to prepare a detail print for every member of an assembly.

Question 7

A(n) ____ print contains all the information needed to make a part.

A) detail
B) assembly
C) construction
D) labor

Question 8

As a rule, a ____ is prepared for each subassembly and shown in a ruled space on the drawing.

A) materials assembly
B) bill of materials
C) usage assembly
D) usage materials

Question 9

The ____________________ are identified on the print by a letter or a number and a name for referencing purposes.

Question 10

A(n) ____ print is used as a guide for assembling finished parts.

A) scale
B) build
C) working
D) assembly

Question 11

To show certain portions of the assembly more clearly, enlarged details of parts are drawn to an enlarged ____ size.

A) usage
B) scale
C) display
D) assembly

Question 12

The working prints include the views required for a complete description and the dimensions that are needed for its construction.

Question 13

A(n) ____ print shows the complete and assembled object.

A) detail
B) working
C) labor
D) assembly

Question 14

One method of identification commonly used gives each part a name and a circled ____.

A) symbol
B) reference
C) letter or number
D) icon

Question 15

____ are usually omitted to simplify reading of the assembly print.

A) Broken lines
B) Temporary lies
C) Assembly lines
D) Scale lines

Question 16

When a part is a unit within itself, only one print is usually required to describe it.

Question 17

A(n) ____________________ print is intended to show the relationship of one part to another when assembled as a unit, and to give an indication of the general appearance of the assembly.

Question 18

As a rule, a bill of materials is shown in a(n) ____________________ space on the drawing.

Question 19

Detail prints include only that information that applies to welding operations.

Question 20

____ drawings facilitate the preparation of bills of materials.

A) Subassembly
B) Building
C) Usage
D) Assembly