Deck 33: Fabricating Countertops

Question 1

Solid surface countertops are attached to cabinets with continuous beads of silicone, rather than dabs.

Answer 1

False

Question 2

Countertops are typically ____ thick.

A) 3/4"
B) 1-1/4"
C) 1-1/2"
D) 1-3/4"

Answer 2

C

Question 3

Commonly used metals are zinc, copper, and stainless steel, and they are often attached to a plywood substrate and are seamless.

Answer 3

True

Question 4

____ is a construction material that consists of Portland cement, gravel, sand, and water.

A) Soapstone
B) Granite
C) Concrete
D) Marble

Question 5

____ is easy to clean and durable, although it is somewhat brittle.

A) Marble
B) Soapstone
C) Granite
D) Ceramic tile

Question 6

Marble is a steatite stone whose primary components are magnesite, dolomite, chlorite, and talc.

Question 7

____ is waterproof, heatproof, and very beautiful.

A) Marble
B) Soapstone
C) Granite
D) Ceramic tile

Question 8

____ is generally a rich, dark gray in color and very smooth to the touch.

A) Marble
B) Soapstone
C) Granite
D) Ceramic tile

Question 9

____ are impact resistant, easy to clean, and inexpensive compared to other countertop materials.

A) Marbles
B) Stone countertops
C) Concretes
D) Laminates

Question 10

____ is a good choice for unusually shaped areas.

A) Concrete
B) Marble
C) Soapstone
D) Granite

Question 11

When joining two pieces of solid surface material, the adjoining edges are first machined using a router fitted with a sharp straight bit and a straightedge.

Question 12

____ material is a synthetic product that consists of a mixture of mineral compounds and polyester or synthetic resins.

A) Laminate
B) Solid surface
C) Marble
D) Concrete

Question 13

Soapstone is more stain resistant than either granite or marble, but it should still be sealed periodically with either a stone sealant or mineral oil.

Question 14

Countertops consist of a flat surface and often a ____.

A) backplane
B) backsplash
C) splashplane
D) splashplate

Question 15

When applying pressure to a laminate with a hand roller, work from each edge to the center, making sure that every bit of the surface receives equal pressure.

Question 16

Laminates are the most commonly used material for kitchen countertops.

Question 17

When cutting laminate with a portable power saw, it should be cut with the ____ to avoid chipping.

A) decorative side down
B) decorative side up
C) plain side down
D) join side up

Question 18

Granite is typically sold in two thicknesses: 3/4 and 1-1/4 inches.

Question 19

Hard oak is the most commonly used wood for countertops due to its tight grain and exceptional hardness.

Question 20

When placing a drop edge on a countertop, the stacking method is stronger and is preferred.

Question 21

Solid surface countertops can have a(n) ____ routed on their edges.

A) inset
B) inlay
C) profile
D) decorative insert

Question 22

With solid surface materials, no seams should be placed within an inch of any corner or within ____ inches of a dishwasher or stove.

A) 2
B) 3
C) 4
D) 5

Question 23

____ can be done with a mill file or a router.

A) Beveling
B) Trimming
C) Finishing
D) Polishing

Question 24

Laminate pieces are initially cut a bit oversize by ____.

A) 1/8" to 1/4"
B) 1/6" to 1/3"
C) 1/4" to 1/2"
D) 1/2" to 2/4"

Question 25

The order in which laminate is applied to a surface depends on the ____ each surface will get and upon appearance.

A) type of wear
B) type of use
C) amount of wear
D) amount of use

Question 26

When making a vertical drop-edge, a wooden web-support system is attached to the bottom of the countertop with ____ adhesive.

A) silicone
B) hot-glue
C) contact
D) cyanoacrylate

Question 27

All seams for solid surface materials must be reinforced with a ____-wide seam support made of solid surface material glued in place.

A) 2"
B) 3"
C) 4"
D) 5"

Question 28

With a solid surface material, the seam supports are beveled to ____ degrees along each edge.

A) 30
B) 45
C) 60
D) 90

Question 29

When applying laminate to a large area, such as the top surface of a countertop, use heavy paper as a slip-sheet, or place clean, thin strips of wood or dowel rods across it at approximately ____ intervals.

A) 5"
B) 6"
C) 7"
D) 8"

Question 30

Avoiding ____-degree corners helps alleviate the potential problem of solid surface material cracking.

A) 45
B) 60
C) 90
D) 120