Deck 35: Bearings and Clutches

Question 1

The acronym ASME stands for ____.

A) Association for Standards in Mechanical Engineering
B) American Society of Mechanical Engineers
C) American Society of Manufacturing Engineers
D) Association for Standards in Manufacturing Engineering

Answer 1

B

Question 2

Snap rings are often used as gasket-type seals.

Answer 2

True

Question 3

V-belts have a ____ cross section.

A) trapezoidal
B) rectangular
C) trapezium
D) rhomboid

Answer 3

A

Question 4

Radial-contact bearings are designed to accommodate maximum thrust loads.

Question 5

The abbreviation for EQUALLY SPACED is ____________________.

Question 6

Retaining rings are also called ____.

A) spring clips
B) snap retainers
C) spring retainers
D) snap rings

Question 7

A(n) ____ -type groove is most commonly used for O-rings.

A) elliptical
B) rectangular
C) semi-circular
D) square

Question 8

Roller bearings have a(n) ____ load capacity compared to ball bearings.

A) lower
B) equal
C) higher
D) greater thrust

Question 9

Tapered roller bearings are designed to support both radial and thrust loads.

Question 10

The four principal types of roller bearings are cylindrical, needle, spherical, and ____________________.

Question 11

Antifriction bearings are usually housed in bearing ____________________.

Question 12

Antifriction bearings are also called ______________________________ bearings.

Question 13

Roller-element bearings are generally classified as either ball or roller.

Question 14

Ball bearings may be categorized as radial, angular contact, and ____________________.