Deck 17: Job Order Cost Systems and Overhead Allocations

Question 1

A cost driver is an activity base that is highly correlated with manufacturing overhead costs.

Answer 1

True

Question 2

A collection of job cost sheets would be similar to a subsidiary ledger and the work-in-process account would be similar to the controlling account.

Answer 2

True

Question 3

Job order costing is appropriate for businesses that produce mass quantities of identical units using the same amount of direct materials,direct labor,and manufacturing overhead.

Answer 3

False

Question 4

Management uses a cost accounting system to evaluate and reward employee performance.

Question 5

An overhead application rate is computed by dividing the actual overhead costs by the expected amount of units in the activity base.

Question 6

When goods are sold,a journal entry is made transferring the goods from cost of goods sold to finished goods.

Question 7

Metalworks applies manufacturing overhead on the basis of direct materials used in production.During the current period,direct materials used for Job #123 amounted to $22,545.If Metalworks' overhead rate is 0.65 of direct materials used,the overhead applied to Job #123 for the period is $15,000.

Question 8

Metalworks employs three assembly workers that,on average,each work 40 hours per week and earn $9 per hour.During the current accounting period,Job #543 consumed 77 hours of direct labor totaling $693.

Question 9

Overhead application rates allow overhead to be assigned as units are being produced throughout the accounting period.

Question 10

A principal objective of cost accounting systems is to ensure that cost reports to management are prepared in accordance with generally accepted accounting principles.

Question 11

In a job order cost system,the costs of direct materials,direct labor,and manufacturing overhead are accumulated separately for each department for a given period of time.

Question 12

Pepsi Cola would most likely use a job order costing system.

Question 13

An overhead application rate is a device used to assign overhead costs to units of product in proportion to some "activity base" that can be traced directly to the manufactured products.

Question 14

Management can compute the per-unit cost of finished goods accurately only when a job order cost system is in use.

Question 15

A credit balance in the manufacturing overhead account at month end indicates that the actual overhead costs were less than the amount of overhead costs applied to jobs.

Question 16

An activity-based costing system does not help managers make better product pricing decisions.

Question 17

A debit balance in the manufacturing overhead account at month end indicates overhead applied to jobs was greater than the actual overhead costs.

Question 18

Job order costing cannot be used for a service company.

Question 19

Metalworks Incorporated purchased $54,500 worth of direct materials to be used in Job #222.During the accounting period,Job #222 used $45,600 of direct materials.The amount of direct materials that would be shown in Job #222 Job Cost Sheet at the end of the accounting period should be $54,500,since this is the amount of direct materials the company had purchased for this particular job.

Question 20

Since cost accounting systems provide managers with information necessary to manage operations,the information from cost accounting systems is not useful for external reporting purposes.

Question 21

The basic types of cost accounting systems are:

A)Job order cost systems,activity based cost systems,and process cost systems.
B)Direct cost systems and indirect cost systems.
C)Completed job cost systems and work in process cost systems.
D)Fixed cost systems and variable cost systems.

Question 22

A job order cost system would be suitable for which of the following:

A)A manufacturer of laundry detergent.
B)A manufacturer of candy bars.
C)A sugar refinery.
D)A sailboat builder.

Question 23

Activity-based costing uses multiple activity bases to assign overhead costs to units of production.

Question 24

Which of the following is a characteristic of manufacturing overhead in a job order cost system?

A)It is directly traceable to specific jobs or units.
B)It includes the cost of all labor relating to manufacturing operations.
C)It is assigned to units produced by means of an overhead application rate.
D)It includes the cost of direct materials used and of indirect labor.

Question 25

The method used by managers when comparing unit costs with budgeted costs or other measures is broadly known as:

A)Sales management.
B)Cost control.
C)Employee evaluation.
D)Account reconciliation.

Question 26

The two steps required in activity-based costing are identifying separate activity cost pools and allocating each cost pool to the product using an appropriate cost driver.

Question 27

If the manufacturing overhead account at month end has a credit balance before adjustment,this indicates that overhead is under-applied.

Question 28

A job order cost system would be appropriate in the manufacturing of:

A)Paints.
B)Custom-made furniture.
C)Breakfast cereal.
D)Standard-grade plywood.

Question 29

Which of the following is an advantage of developing a predetermined overhead application rate?

A)Long-run fluctuations in volume of output are eliminated.
B)In a job order system,unit costs can be determined only at the end of the period.
C)The overhead application rate facilitates assigning overhead costs to the ending inventory of work in process.
D)Actual overhead will always be less than applied overhead.

Question 30

A debit balance in the Manufacturing Overhead account at the end of the period indicates that overhead has been under-applied to jobs.

Question 31

The advantage of using a predetermined overhead application rate is that:

A)Units produced are charged with a "normal" amount of manufacturing overhead regardless of whether they are produced in a high-volume month or a low-volume month.
B)Overhead costs will be limited to the predetermined amount.
C)Entries need not be made to record actual overhead costs incurred.
D)The unit cost of production will be lower than it would be if actual overhead costs were assigned to units produced.

Question 32

In activity-based costing,only one cost driver should be used in applying overhead.

Question 33

Under a job order cost system,costs are accumulated for:

A)Each department in the production cycle.
B)Each batch of production,known as a job or lot.
C)Each individual unit produced.
D)Each job supervisor.

Question 34

Activity-based costing tracks cost to the activities that consume resources.

Question 35

Activity-based costing systems always result in more accurate measurements of unit costs.

Question 36

An increase in an activity base must cause an increase in actual overhead costs incurred for that base to be considered a cost driver.

Question 37

Select the best answer to complete the sentence: An effective cost accounting system should match processes that consume resources with the associated ________ in order to maintain competitive advantage.

A)Sales
B)Shareholders
C)Costs
D)Activities

Question 38

Which of the following is not a commonly used cost accounting system?

A)Manufacturing yield costing
B)Job order costing
C)Process costing
D)Activity-based costing

Question 39

The type of cost accounting system best suited to a particular company depends on:

A)The nature of the company's manufacturing operations.
B)The requirements set forth by the FASB.
C)Government regulations.
D)The type of cost drivers available.

Question 40

If actual overhead costs are less than the amount of overhead applied to production,this indicates that manufacturing overhead is over-applied.

Question 41

A job order cost system traces direct materials cost to a particular job by means of:

A)Materials requisitions.
B)A production budget.
C)The Materials Inventory controlling account.
D)A debit to the job cost sheet for the job.

Question 42

A job cost sheet should:

A)Contain information that summarizes all jobs finished.
B)Contain information on each individual job in process.
C)Contain only the direct costs of a particular job.
D)Only be used for jobs that have been completed.

Question 43

Which of the following costing systems would always use job cost sheets?

A)Job order costing
B)Process costing
C)Activity-based costing
D)Specific-identification costing

Question 44

Overhead costs are assigned to production using an overhead application rate,whereas no such "application rate" is used to assign the costs of direct materials and direct labor to production.The reason for this difference in procedures is that:

A)Overhead is an indirect cost which cannot be traced easily and directly to specific units of product.
B)Overhead is always larger in dollar amount than either direct materials or direct labor.
C)The amounts of direct material and direct labor applicable to each unit of production cannot be determined as easily as the amount of overhead.
D)Overhead is always equal to a constant percentage of direct labor costs.

Question 45

In a job cost system,the Work-in-Process Inventory controlling account may be reconciled to the total of the:

A)Employee time cards.
B)Materials requisitions.
C)Work-in-Process Inventory records for each department or process.
D)Job cost sheets.

Question 46

Moran Company uses a job order cost system and has established a predetermined overhead application rate for the current year of 150% of direct labor cost,based on budgeted overhead of $900,000 and budgeted direct labor cost of $600,000.Job No.1 was charged with direct materials of $36,000 and with overhead of $27,000.What is the total cost of Job No.1?

A)$64,000
B)$81,000
C)$91,000
D)Cannot be determined without additional information.

Question 47

Edwards Auto Body uses a job order cost system.Overhead is applied to jobs on the basis of direct labor hours.During the current period,Job No.337 was charged $425 in direct materials,$475 in direct labor,and $190 in overhead.If direct labor costs an average of $16 per hour,the company's overhead application rate is:

A)$7.27 per direct labor hour.
B)$6.40 per direct labor hour.
C)$17.50 per direct labor hour.
D)$40 per direct labor hour.

Question 48

A job cost sheet usually contains a record of each of the following except:

A)The cost of direct materials charged to a particular job.
B)The overhead costs actually incurred on a particular job.
C)The cost of direct labor charged to a particular job.
D)The overhead cost applied to a particular job.

Question 49

Marty's Metal Shop uses a job order cost system.It applies overhead to jobs at a rate of 175% of direct labor costs.Job No.2617 required $800 in direct labor costs.The job was initially budgeted to require $850 in direct labor costs.Overhead applied to Job No.2617 during the period amounted to:

A)$850.
B)$1,400.
C)$1,275.
D)$1,487.50.

Question 50

At the end of the accounting period,applied overhead was larger than actual overhead by a material amount.The over-applied overhead should be:

A)Treated as an extraordinary gain.
B)Treated as an extraordinary loss.
C)Apportioned among Work in Process Inventory,Finished Goods Inventory,and Cost of Goods Sold.
D)Ignored;actual overhead is determined only for internal control purposes.

Question 51

[The following information applies to the questions displayed below.]
Riverview Company's budget for the coming year includes $6,000,000 for manufacturing overhead,50,000 hours of direct labor,and 250,000 hours of machine time.
If Riverview applies overhead using a predetermined rate based on machine-hours,what amount of overhead will be assigned to a unit of output which requires 0.5 machine hours and 0.25 labor hours to complete?

A)$12.00
B)$16.00
C)$20.00
D)$ 6.00

Question 52

Manufacturing overhead is not:

A)A product cost.
B)An indirect cost.
C)A manufacturing cost.
D)A period cost.

Question 53

Manufacturing overhead is:

A)A direct cost that can traced to a specific job.
B)An indirect cost that can be traced to a specific job.
C)A direct cost that cannot be traced to a specific job.
D)An indirect cost that cannot be traced to a specific job.

Question 54

A job cost sheet will include:

A)All raw materials purchased.
B)Actual overhead.
C)Direct labor applied to production.
D)Selling costs.

Question 55

A predetermined overhead application rate:

A)Expresses an expected relationship between overhead costs and an activity base.
B)Can be determined by dividing budgeted direct labor cost by the budgeted factory overhead costs.
C)Is computed at the end of the period once actual overhead costs are known.
D)Applies the same amount of overhead to each product or service.

Question 56

The year-end balance in the Materials Inventory controlling account is equal to:

A)The total of the various materials subsidiary ledger accounts (the materials on hand at the end of the period).
B)The total amount of materials requisitioned during the period.
C)The total amount of materials purchased during the period.
D)The amount of materials debited to the Work-in-Process Inventory account during the period.

Question 57

The cost of salaries paid to employees who work in a factory maintaining the heating system is considered:

A)Direct labor.
B)Indirect materials.
C)Factory overhead.
D)General and administrative costs.

Question 58

The document that provides information for the cost of goods manufactured is:

A)The job cost sheet.
B)Time cards.
C)Material requisition.
D)Payroll check.

Question 59

[The following information applies to the questions displayed below.]
Riverview Company's budget for the coming year includes $6,000,000 for manufacturing overhead,50,000 hours of direct labor,and 250,000 hours of machine time.
If Riverview applies overhead using a predetermined rate based on labor-hours,what amount of overhead will be assigned to a unit of output which requires 0.5 machine hours and 0.25 labor hours to complete?

A)$16.00
B)$30.00
C)$20.00
D)$60.00

Question 60

Doyle Co.uses a job order cost accounting system.At year-end the Work-in-Process Inventory controlling account showed a debit balance of $43,125.For the two jobs in process at year-end,one showed $6,000 in direct materials and $4,500 in direct labor.The job cost sheet for the second job showed $9,000 in direct materials and $6,750 in direct labor.If the company is using a predetermined overhead application rate based on direct labor cost,the rate is:

A)50%.
B)100%.
C)150%.
D)200%.

Question 61

Benefits of activity-based costing include all of the following except:

A)More accurate measures of product costs.
B)More accurate evaluations of product profitability.
C)A better understanding of what "drives" manufacturing overhead costs.
D)More subjective product pricing decisions.

Question 62

The employee time card for John Winter indicates that he spent last week performing routine maintenance on factory machinery.Payments made to Winter for last week's work should be:

A)Debited to Work in Process Inventory.
B)Credited to the Direct Labor account.
C)Debited to the Direct Labor account.
D)Debited to the Manufacturing Overhead account.

Question 63

[The following information applies to the questions displayed below.]
Capri Boat Corporation uses a job order cost system and applies overhead based on a percentage of direct labor cost.Cost flows through the Work in Process Inventory account during March are given below:
Only Job #007 was still in process at the end of March and this job had been charged with $40,000 in direct materials cost.
The amount of overhead costs applied to Job #007 during March was:

A)$90,000.
B)$26,250.
C)$65,000.
D)$60,000.

Question 64

An activity base is said to be a "driver" of overhead costs when the activity base:

A)Is independent of the amount of overhead cost incurred.
B)Results in an overhead application rate greater than 100%.
C)Is a causal factor in the amount of overhead cost incurred.
D)Is the largest of the various types of expenditures classified as manufacturing overhead.

Question 65

When a job is completed:

A)Cost of goods sold is debited.
B)Work-in-process inventory is debited.
C)Materials inventory is credited.
D)Finished goods inventory is debited.

Question 66

The journal entry that accounts for the $300,000 transferred out of Work in Process account includes a debit of $300,000 to:

A)Finished Goods.
B)Cost of Goods Sold.
C)Accounts Receivable.
D)Sales.

Question 67

The journal entry to transfer the completed Jefferson Apartments project to Canfield's finished goods inventory would include:

A)A debit to the Finished Goods Inventory account of $975,000.
B)A debit to the Finished Goods Inventory account of $2,625,000.
C)A debit to the Finished Goods Inventory account of $1,650,000.
D)A credit to the Work in Process Inventory account of $2,175,000.

Question 68

[The following information applies to the questions displayed below.]
Capri Boat Corporation uses a job order cost system and applies overhead based on a percentage of direct labor cost.Cost flows through the Work in Process Inventory account during March are given below:
Only Job #007 was still in process at the end of March and this job had been charged with $40,000 in direct materials cost.
The amount of direct materials cost charged to completed jobs during March was:

A)$20,000.
B)$50,000.
C)$30,000.
D)$40,000.

Question 69

An activity-based costing system would probably not be appropriate if:

A)A company produces more than one product line.
B)A company produces only one product.
C)A company is highly automated.
D)A company has more than one production facility.

Question 70

In an activity-based costing system,manufacturing overhead costs are divided into separate:

A)Cost drivers.
B)Activity cost pools.
C)Activity bases.
D)Indirect cost centers.

Question 71

The account Work-in-Process Inventory:

A)Consists of completed goods that have not yet been sold.
B)Consists of goods being manufactured that are incomplete.
C)Consists of materials to be used in the production process.
D)Consists of the cost of new materials used,labor but not overhead.

Question 72

The Work in Process account in a job order cost accounting system will be debited for:

A)Only direct labor and direct materials.
B)Direct labor,direct materials,and applied overhead.
C)Direct labor,direct materials,and actual overhead.
D)Only direct materials and applied overhead.

Question 73

Under-applied overhead at the end of a month:

A)Results when actual overhead costs are less than amounts applied to work in process.
B)Indicates a poorly designed cost accounting system.
C)Is represented by a debit balance remaining in the Manufacturing Overhead account.
D)Is represented by a credit balance remaining in the Work in Process Inventory account.

Question 74

Which of the following statements is true about activity-based costing?

A)Only one activity should be used for a company.
B)Many different activity bases are used in applying overhead.
C)There can only be one cost driver.
D)Direct materials and direct labor are applied to work-in-process based upon cost drivers.

Question 75

If manufacturing overhead is materially over-applied,it is best to:

A)Close it to work-in-process inventory.
B)Close it to finished goods inventory.
C)Close it to cost of goods sold.
D)Apportion it among work-in-process,finished goods,and cost of goods sold.

Question 76

[The following information applies to the questions displayed below.]
Canfield Construction applies overhead to its projects at a rate of $65 per direct labor hour.Laborers are paid an average rate of $30 per hour.The Jefferson Apartments project was charged a total of $1,200,000 in direct materials and $450,000 in direct labor costs.
Overhead applied to the Jefferson Apartments project amounted to:

A)$450,000.
B)$650,000.
C)$975,000.
D)$1,600,000.

Question 77

[The following information applies to the questions displayed below.]
Capri Boat Corporation uses a job order cost system and applies overhead based on a percentage of direct labor cost.Cost flows through the Work in Process Inventory account during March are given below:
Only Job #007 was still in process at the end of March and this job had been charged with $40,000 in direct materials cost.
The predetermined overhead application rate at Capri Boat is what percentage of direct labor costs?

A)38%
B)62%
C)260%
D)580%

Question 78

Debits to the Manufacturing Overhead account record:

A)The actual amounts of overhead costs incurred during a period.
B)The amount of overhead applied to production during a period.
C)The amount of overhead incurred on a specific job.
D)All conversion costs of a period.

Question 79

The journal entry made by Canfield to record the sale of the Jefferson Apartments project to King Development Company for $5,250,000 would include:

A)A debit to Sales of $5,250,000.
B)A debit to Cost of Goods Sold of $2,625,000.
C)A credit to Finished Goods Inventory of $975,000.
D)A debit to Finished Goods Inventory of $975,000.

Question 80

The account Finished Goods:

A)Consists of completed goods that have not yet been sold.
B)Consists of goods being manufactured that are incomplete.
C)Consists of materials to be used in the production process.
D)Consists of the cost of new materials used,labor but not overhead.