Where a branch circuit supplies continuous loads or any combination of continuous and noncontinuous loads, the minimum branch-circuit conductor size shall have an allowable ampacity not less than the noncontinuous load plus ____ of the continuous load.
A) the minimum
B) the maximum
C) the average
D) 125%
Correct Answer:
Verified
Q1: Branch circuits shall be rated in accordance
Q2: _ receptacles are permitted on a 15-ampere
Q4: Where appliances are unlikely to be used
Q6: _ applies to the wall placement provisions
Q9: GFCI protection for personnel is required in
Q10: Wall switch-controlled lighting outlets are not required
Q10: Show-window branch-circuit loads must be calculated either
Q11: When considering receptacle volt-ampere rating, a single
Q15: In cord-connected showcases, the secondary circuit(s) of
Q17: The disconnecting means for a sign in
Unlock this Answer For Free Now!
View this answer and more for free by performing one of the following actions
Scan the QR code to install the App and get 2 free unlocks
Unlock quizzes for free by uploading documents