A vibration or pulsation in the brake pedal when the brakes are applied is usually caused by ______.
A) warped rotors [runout]
B) oil or grease on the linings
C) frozen or sticking calipers
D) brake hose collapsed on the inside
Correct Answer:
Verified
Q42: Tapered roller bearings are being discussed. Technician
Q43: Technician A says unidirectional rotors can be
Q44: After new pads are installed, Technician A
Q46: A fixed caliper _.
A) is bolted to
Q47: Electronic pad wear warning systems are being
Q50: The customer complains of a high-pitched squeal
Q52: The red Brake warning light is NOT
Q53: Caliper pistons that have threaded adjuster pushrods
Q60: A hard pedal (abnormally high amount of
Q65: A brake inspection reveals that the outboard
Unlock this Answer For Free Now!
View this answer and more for free by performing one of the following actions
Scan the QR code to install the App and get 2 free unlocks
Unlock quizzes for free by uploading documents