Using Figure 5-11, B, in the textbook, 90 kVp, 100 mA, and 0.1 sec is

Question

Quizplus · Accepted Answer

Based on the information provided, without access to Figure 5-11 or the specific textbook, it's impossible to accurately determine the safety of the exposure settings. However, in general, an exposure of 90 kVp, 100 mA, and 0.1 sec could be considered within safe operational limits for many X-ray systems, assuming it does not exceed the system's maximum heat capacity or recommended exposure levels. The answer assumes a typical scenario where such settings would not be harmful or unsafe under standard operating conditions for diagnostic imaging, but actual safety would depend on the specific equipment and context.

Using Figure 5-11, B, in the Textbook, 90 KVp, 100