A technician is diagnosing the cause of an insufficient heat problem. He/She notices the fan is working but not providing much air flow. He/She disconnects the fan power feed wire and connects the fan to the battery using a fused jumper wire. The specification for the fan motor is 16 amps. His/Her ammeter shows 26 amps when the fan is jumped directly to the battery. What could be the problem?
A) bad fan motor ground
B) high resistance in the fan motor wiring
C) shorted wiring in the fan motor
D) All the answers are correct.
Correct Answer:
Verified
Q54: A voltage drop test is performed to
Q55: An electrical _ is a diagram used
Q56: _ solder is used to repair electrical
Q57: Duty cycle is measured in _.
Q58: The best method for testing wires and
Q60: A potentiometer [type of variable resistor] can
Q61: What units of measurement are used to
Q62: What are the five steps in diagnosing
Q63: The most common cause of high resistance
Q64: What does the scope's trigger do?
Unlock this Answer For Free Now!
View this answer and more for free by performing one of the following actions
Scan the QR code to install the App and get 2 free unlocks
Unlock quizzes for free by uploading documents