Technician A loosens the CV joint axle nut using a breaker bar with the wheels on the ground and an assistant holding pressure on the brake pedal. Technician B uses an impact wrench for the same task . Who is correct?
A) A only
B) B only
C) both A and B
D) neither A nor B
Correct Answer:
Verified
Q53: Roll pins are installed and removed from
Q54: Technician A uses a soft-face hammer to
Q55: A rough growling noise occurs when the
Q56: What type of bearings should not be
Q57: An engine support fixture is used to
Q59: If a threaded area in an aluminum
Q60: _ mallets can be used to tap
Q61: End play and preload are usually set
Q62: What do shiny metallic particles in the
Q63: Identify three items to check when inspecting
Unlock this Answer For Free Now!
View this answer and more for free by performing one of the following actions
Scan the QR code to install the App and get 2 free unlocks
Unlock quizzes for free by uploading documents