Which of the following is true of system planning regarding parts design?
A) The robot's arm can reach any place accessible to the welder.
B) Mockups and CAD/CAM can be used after the robot is installed to reduce problems.
C) The parts design should consider the lower heat input from automated processes.
D) When possible, all welds should be performed in the flat position.
Correct Answer:
Verified
Q1: Movement along the z-axis is also referred
Q2: The manipulation of the electrode or torch
Q3: A signal from the _ indicates that
Q5: In a(n) _ process, the welder controls
Q6: _ technology can help in selecting materials,
Q7: Movement along the x-axis is also referred
Q8: _ are the three most common storage
Q9: In a(n) _ joining process, the joining
Q10: _ technology can aid in selecting assembly
Q11: The waste stub in SMA electrodes represents
Unlock this Answer For Free Now!
View this answer and more for free by performing one of the following actions
Scan the QR code to install the App and get 2 free unlocks
Unlock quizzes for free by uploading documents