Why would you not reduce the flame size below its correct setting if the torch flame is too large for the job?
A) Lowering the flame can result in the tip overheating.
B) The flame would go out so you would have to relight the torch.
C) Because lowering the gas flow will not reduce the flame heat.
D) You would lower the flame so you would not burn through the metal due to the excessively large flame.
Correct Answer:
Verified
Q26: The _ must be protected by the
Q27: What is the minimum tensile strength of
Q28: Why should the end of the welding
Q29: By controlling the torch flame carefully it
Q30: Why would you use a back stepping
Q32: What effect on the weld pool would
Q33: _ is the depth into the base
Q34: _ seal tips must be tightened with
Q35: _ filler rods for gas welding are
Q36: _ filler metals are welding rods that
Unlock this Answer For Free Now!
View this answer and more for free by performing one of the following actions
Scan the QR code to install the App and get 2 free unlocks
Unlock quizzes for free by uploading documents