A network engineer must perform a backup and restore of the Cisco Nexus 5000 Series Switch configuration. The backup must be made to an external backup server. The only protocol permitted between the Cisco Nexus switch and the backup server is UDP. The backup must be used when the current working configuration of the switch gets corrupted. Which set of steps must be taken to meet these requirements?
A) 1. Perform a running-config backup to an SFTP server. 2. Copy backup-config from the SFTP server to the running-config file.
B) 1. Perform a startup-config backup to a TFTP server. 2. Copy backup-config from the backup server to the running-config file.
C) 1. Perform a running-config backup to an SCP server. 2. Copy running-config in the boot flash to the running-config file.
D) 1. Perform a startup-config backup to an FTP server. 2. Copy startup-config in the boot flash to the running-config file.

Question

Quizplus · Accepted Answer

TFTP uses UDP, which is the only permitted protocol in this scenario. Therefore, backing up the startup-config to a TFTP server and restoring it to the running-config file meets the requirements.

A Network Engineer Must Perform a Backup and Restore of the Cisco