Which of the following specifies the correct method to log onto the router locally using a terminal emulation program?
A)Connect the PC's COM port to the router's console port using a straight-through cable.
B)Connect the PC's COM port to the router's Ethernet port using a straight-through cable.
C)Connect the PC's Ethernet port to the router's Ethernet port using a rollover cable.
D)Connect the PC's COM port to the router's console port using a rollover cable.

Question

Quizplus · Accepted Answer

To logon to a router using a terminal emulation program, you should connect the PC's COM port to the router's console port using a rollover cable.
Key Takeaway: The most commonly used terminal emulator program is a HyperTerminal that runs in Windows. It offers you a text-based command prompt on a remote device. The device should be either a serial device, like a Cisco router, connected directly to your PC's serial port OR a network device. HyperTerminal can either use the local serial interface for communications on the network. If it uses the network, it used the telnet protocol.

Which of the Following Specifies the Correct Method to Log